Can't Even Get Option When Booting From OS Disc To Format And Reload Windows
Apr 15, 2012
My laptop suddenly decided to not run, it gets to "starting windows" but will not go any further. I`ve tried to boot from the OS disc to do a repair but it still goes to "starting windows". If i select "repair computer" at start up without the OS disc it stays at that window and will not go any further, I can`t even get an option when booting from OS disc to format and reload windows. The HDD is spinning so i know it`s getting power. I can run Linux live cd so i`m presuming it`s probably the HDD is fried even though it`s spinning. I even took ouit nthe HDD and connected it to my desktop but the desktop wouldn`t recognise it.
View 8 Replies
ADVERTISEMENT
May 24, 2010
I am using a proper Windows 7 Ultimate disc to reload windows via the upgrade option. This is something I have done in the past without problems. I have tried for the last 2 days and after 5 hours and at the point of booting up into windows gives me the message that the upgrade has been unsuccessful and is reloading the previous version. Can anyone tell me why. The original version on my laptop is a legit copy as is the disc I have which is also the disc the copy on my laptop was originally installed from.
View 9 Replies
View Related
Dec 21, 2011
I recently made a separate partition on my HD (C), let's call it F. I wanted to load up windows xp onto that small partition, F, so as to see if it would allow me to operate better, as I have a gaming laptop that seems to be suffering from a memory hog svchost. Anyway, now that I've booted up to the F partition and working in XP, I find that I dislike it, I also can't figure out how to connect to the internet. My issue is, I can't figure out how to boot to the C, my Windows 7, the original OS. I'm not given an option upon startup and I can't find anything in my BIOS that is obviously pertaining to my issue.
View 14 Replies
View Related
Jan 26, 2013
how can download windows 7 disc in black screen without giving a option of F2 and F12? The screen display black screen with only tiny white half square shape on the top left corner. I removed the battery with power only connect direct and insert the disc turn it off and turn on again asuming to give me the option of F2/F12 but didn't the black screen seem to be froze. What should i do to recover my Toshiba Satellite P755 Laptop?
View 6 Replies
View Related
Aug 28, 2012
Can I format a hard drive that has windows 7 with a Win95 disc to get prompt to format 'c or d'
View 8 Replies
View Related
Nov 27, 2011
I'm trying to install winnows 7 but when it comes to formatting Partion 1 to do a custom install, the format option it greyed out and I can only delete it. Is there anything I can do to format it?My current OS on the computer im stalling to: Linux - Ubuntu 11.10
View 1 Replies
View Related
Dec 3, 2009
If you registered forr the Windows 7 Upgrade option disk and your manufacturer is supposed to send you a voucher that you can redeem online to microsoft to get them to ship you a disc, can you download the disk as an option? because I have no cd drive.
View 1 Replies
View Related
Feb 28, 2012
my computer has Windows XP 32-bit, and i'm trying to do a clean install to Windows 7 64-bit. this is my processor. i'm assuming it can take the 64-bit version. i boot from the disc, press any key, and all the files load and whatnot. i see a screen that says "starting windows", and the logo appears. i figure that's a good sign. but...after that, i get stuck on a screen with nothing but some "desktop wallpaper" and my mouse. it just sits there. i can move my mouse around, but no installation options pop up. i bought the upgrade version of Windows 7, and i'm under the impression that you should be able to do a clean install using those discs. i stuck the 32-bit disc in my drive, and the install menu showed up no problem. but i want to install the 64-bit version.
View 9 Replies
View Related
May 31, 2012
window unable to format disc
View 2 Replies
View Related
May 17, 2012
i have an m17 r2 alienwAre laptop.in the bios menu the sata option HCAI is selected but when the comp boots it says no operating system is found when booting for bios sata option RAID it runs fine. But the comp should be on HCAI in order to run features that a specific to that computer . I have tryed reformatting but in HCAI it on finds the second of 2 500g hard drives but the partition with the boot is on hdd1 not hdd2 . Boot up again with RAID it finds both and and I can reformat have tryed to reset the registry and have tryed using drivermax to find out if I'm missing sata drivers I've also tryed reinstalling my bios from the dell
View 6 Replies
View Related
Nov 12, 2011
How do I format my toshiba laptop legally without a Windows 7 disc?
My dealer refuses to format my computer without charging me a robbery of $60.
View 4 Replies
View Related
Oct 3, 2012
FORMATING my C drive and how to reinstall windows 7 again with the help of recovery disc.
my computer was formated and windows were reinstalled but it was not done by me. I have the recovery discs provided by the hp laptop company.
i have windows 7 home premium 64 bit.My device is HP DV6 6121tx
View 4 Replies
View Related
Jul 3, 2011
w7 i can format delete en cut file from any external drive or disc?
View 1 Replies
View Related
Feb 9, 2013
I have an HP G62 laptop which came pre-installed with Windows 7. I would like to fully remove all data on the HDD and reinstall Windows 7.The 'Computer' section of the Start button shows the following HDD (not sure if these are partitions or not, but I'm assuming that they are!):
Local Disk ( C: )
Recovery ( D: )
HP_TOOLS ( F: )
I had a quick look at the D: drive and it showed a few setup files, all of which seem to be related to MSOFFICE. :-?I have been reading about data destruction programs that will absolutely wipe the drive and remove all data; I would like to do this and then reinstall Windows 7 so that the laptop effectively becomes a 'new' one.
1. How do I go about formatting the HDD with a data destruction program and then reinstall Win 7, since I do not have a bootable disc?
2. How reliable are such data destruction programs? Is there any margin of error? (I am a bit concerned about all the sensitive information that I have saved on my laptop such as bank details, family photos, etc.)
View 10 Replies
View Related
Nov 1, 2011
I don't know if this is the right place to post this question but thought I'd give it a try.Basically my problem is that I want to use hdderase to clean a Solid State Drive I've just sold on ebay but I cannot for the life of me get it to work. I have used boot discs before on older computers but the computer I'm trying to do it on now is new and I don't know what is going on with it. I can get Windows boot manager to load with the cd but that doesn't seem to be what I need. I just don't know why it won't work or if I'm doing something wrong or what
View 2 Replies
View Related
Jan 1, 2012
I have a Windows XP PC which I want to completely delete everything and throw it in the garbage. Problem is the CD-rom drives do not work and I can't boot from USB (no option in BIOS).... I've already deleted personal files from the computer to the recycle bin and used Eraser to securely delete it. I want to completely delete everything (like a complete reformat) ---- within the OS or by other means.... how can I do this?
View 9 Replies
View Related
Dec 9, 2012
I cannot seem to get this DVD-R to even come up when I insert it in order to format it.
View 1 Replies
View Related
Jan 15, 2013
Last night I managed to copy some photographs onto a CD- R disc and they played on the TV through a DVD player. This evening I attempted to load some photographs onto some discs which came with no marking on them so they must have been cheap. The outer cover of the discs said,DVD-R and when I attempted to start to use them a message which I set out below came up saying the disc needed formatting. I looked up how to format a disc and I followed the instructions as far as I could which I set out below.
1. Insert a disc into your computer's CD or DVD drive. I did that.
2. In the dialog box that appears, click Burn files to disc. That did come up.
3. In the Burn a disc dialog box, type a name for your new disc. I did that.
Another box came up asking. How do you want to use this disc? Like a USB flash drive. With a CD/DVD player and I clicked onto the With a CD/DVD player.I then clicked onto next.A large empty box with nothing in it came up and a small block came up saying. Windows can't read the disc in drive D: Make sure that the disc uses a format that Windows recognizes. If the disc is unformatted, you need to format it before using it.From then on in I was stuffed because there were no formatting options to be seen. Any suggestions will be welcome although the thought crossed my mind that pherhaps I need to buy some CD-R discs but I thought I should use DVD discs.
View 5 Replies
View Related
Nov 23, 2012
Which disc format does Windows 7 Mastered file system use when burning a disc? ISO 9660, Joliet, UDF?
View 3 Replies
View Related
Apr 12, 2012
I bought a HP Laptop with Windows 7 Home Premium pre-installed. I got rid of any bloatware and as I'm typing this, Macrium is imaging my C drive to a network drive. Now my question is, would I be able to completely format the computer, set up my own partitions and install Windows on one of them? Preferably a fresh and clean version but I wouldn't mind the bloatware one either. Things to consider, I don't have a disk-drive so it'd have to be done with a thumbdrive; I have not been able to find the actual O/S product key, if someone could tell me where to locate it.
View 4 Replies
View Related
Oct 25, 2009
Is it possible to use the upgrade disc to format C drive (it has the Windows 7 RC activated, I can also reinstall Windows Vista if I have to), and do a clean install?
View 8 Replies
View Related
Nov 24, 2011
How do i format a disc to' mastered' using windows 7
View 1 Replies
View Related
Oct 29, 2011
My son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
View 2 Replies
View Related
Jul 10, 2012
I'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
View 3 Replies
View Related
May 6, 2012
Firstly I should say that I am primarily a mac user, and it is not my laptop I am posting about. Although I am reasonably knowledgable about Windows, I haven't used it since XP, about four years ago, and so am pretty rusty.Basically, my girlfriends computer randomly turned off about a week ago, she assumed it was a dead battery, plugged it in, and then when it turned back on it wouldn't boot displaying error message: missing operating system.As it is a Dell laptop it didn't come with any installation discs, and I totally forgot to even make a repair disc when we got the laptop. I managed to get hold of a Windows 7 Installation Disc and license key for Windows 7 Ultimate 64 bit through my university. I think the laptop was previously running Windows 7 Home Premium, but that's all I know, and I'm not entirely sure of that fact.
Anyway, burnt the .iso to disc and have tried to boot several times from DVD Drive. The laptop loads the files from the DVD fine, and gets as far as the "Starting Windows" screen, where it seems to get stuck for a few minutes, until it becomes a black screen with just a cursor (the cursor still moves). This also happens with an 64 bit repair DVD I also managed to get hold of.
View 9 Replies
View Related
Mar 4, 2010
i am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
View 2 Replies
View Related
Oct 20, 2009
Is there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
View 4 Replies
View Related
Jun 22, 2012
My wife's Dell M1330 was updated from Vista to Windows 7 several years, ago and now the hard disk is corrupted. Can I use the upgrade CD to reload Windows 7?
View 2 Replies
View Related
Sep 13, 2011
This happens very frequently. It happens on and off. I am running Windows 7 professional on Dell Inspiron E1505 and when my computer goes into hibernation ( it doesn't matter if it's on battery or plugged in), sometimes I can reload the computer physically. Sometimes or most times, it shows a black screen and I have to manually shut the PC up and then reload it losing everything which I had before going into hibernation.
View 2 Replies
View Related
Mar 7, 2012
I'm running Win7 64-bit on a home-built machine. I'm trying to reformat C drive.OK. So, my bios is set to boot only from CD. My keyboard is enabled in the bios. Yet when I use F12 to enter boot menu, hdd is shown as selected. When I scoll down, select CD and hit enter, my machine still boots from hdd. I have used imgburn to burn a new copy of the Win7 DVD in case mine was faulty..
View 7 Replies
View Related
May 28, 2012
After reloading Windows 7 on an Acer Aspire, message " Windows could not start the installation process " appears. how to complete the Windows reload process?
View 2 Replies
View Related
