How Can Download Windows 7 Disc In Black Screen Without Giving A Option Of F2
Jan 26, 2013
how can download windows 7 disc in black screen without giving a option of F2 and F12? The screen display black screen with only tiny white half square shape on the top left corner. I removed the battery with power only connect direct and insert the disc turn it off and turn on again asuming to give me the option of F2/F12 but didn't the black screen seem to be froze. What should i do to recover my Toshiba Satellite P755 Laptop?
View 6 Replies
ADVERTISEMENT
Dec 3, 2009
If you registered forr the Windows 7 Upgrade option disk and your manufacturer is supposed to send you a voucher that you can redeem online to microsoft to get them to ship you a disc, can you download the disk as an option? because I have no cd drive.
View 1 Replies
View Related
May 31, 2009
Start Up with Boot Disc Loaded still yielding Black Screen with No's 1&2 and no Defined Purpose to the Numbers... 1 however just Boots Win7x86, and 2 still yields Non Boot Disc or Disc Error, replace and press any key to Restart Alert... This just boots Win7x86 also...
Still unable to get Partition Selection Page at S/U... Tried Downloadin' EasyBCD, but that's no Help... Tries followin' the Tutorials, also no Help... Burned 3 Discs thru CDBurnerXP (How I did my x86 Disc I'm runnin' off of now), Windows own ISO Burner in Win7x86 and no luck...
Any ideas...?
View 2 Replies
View Related
Feb 4, 2012
My Windows 7 machine is refusing to boot.
If I try to start it normally, it resets after the starting windows screen. If I try to use the other boot options (safe mode, etc), I get 'Windows is loading files' and then a black screen with a movable white cursor. The repair options all end up at the same black screen with cursor.
If I boot from the Windows 7 disc, after the 'press any key to boot from the DVD' screen, I don't get any options to install Windows, or select a language, I just get either the same starting windows > black screen with cursor, or the same list of repair safe mode options, all of which end up at the black screen with cursor.
If I boot from the Windows 7 recovery disc, after 'press any key to boot from the dvd' I get 'Windows is loading files', and then... the black screen with white cursor.
View 1 Replies
View Related
Apr 15, 2012
My laptop suddenly decided to not run, it gets to "starting windows" but will not go any further. I`ve tried to boot from the OS disc to do a repair but it still goes to "starting windows". If i select "repair computer" at start up without the OS disc it stays at that window and will not go any further, I can`t even get an option when booting from OS disc to format and reload windows. The HDD is spinning so i know it`s getting power. I can run Linux live cd so i`m presuming it`s probably the HDD is fried even though it`s spinning. I even took ouit nthe HDD and connected it to my desktop but the desktop wouldn`t recognise it.
View 8 Replies
View Related
Oct 2, 2011
In the last couple of weeks, sometimes when I power on, I get nothing but a black screen. I have to do a hard turnoff, then press escape and do a restore. I checked update history, and everytime it shows - Bing Bar 7.0 (KB2528989) had been installed. Since I did a restore, the bing bar doesn't show where I can uninstall, so I had to disable automatic updates so I can use the computer! I don't want Bing - it is NOT critical, and need to know how to stop it without having to disable updates. If I let it install, I can't get past the black screen and have to restore, and then can't uninstall it, and it installs again! I have an HP Mini 311-1037-NR, with Windows Home Premium.
View 1 Replies
View Related
May 24, 2010
I am using a proper Windows 7 Ultimate disc to reload windows via the upgrade option. This is something I have done in the past without problems. I have tried for the last 2 days and after 5 hours and at the point of booting up into windows gives me the message that the upgrade has been unsuccessful and is reloading the previous version. Can anyone tell me why. The original version on my laptop is a legit copy as is the disc I have which is also the disc the copy on my laptop was originally installed from.
View 9 Replies
View Related
Aug 27, 2012
after turning on my laptop that have win 7 something happened <after the win 7 logo and the moving 4 colours of the start up a blue screened error appears say "a problem has been detected and windows has been shut down to prevent damage to your computer and at the bottom of the message Technical information *** STOP: 0x0000007B(0x80786A50,0XC0000034,0X00000000,0X00000000)" > and i tried to install a new windows drive C doesn't appear and the other drive is not a NTFS so i couldnt install a new windows even turning on the existing windows to take my files
View 4 Replies
View Related
Oct 25, 2009
I Installed CrossFire Having played it before i upgraded, and it gave me a blue screen. I though " oh i did something wrong " So i unistalled and reinstalled, you know, the stuff you usually do.
Anyway, i've been reading around the forum and i've found other people are having this problem too, " Getting the bluescreen " Now i was wondering if their any fixes that could make the game work, Any help would be useful and much appreciated!
View 2 Replies
View Related
Nov 3, 2009
I've had vista for the past year and this has never happend, soon as I install Windows 7 atleast once a day my laptop will randomly "BLUE SCREEN OF DEATH" with either the error "PFN LIST CORRUPT" OR "IRQL_NOT_LESS_OR_EQUAL_TO" can you shed any light on this?
View 9 Replies
View Related
Jul 5, 2012
I've been using TechTracker for years, but today I hit a wall with the VLC Player update from ver. 2.0.1 to ver. 2.0.2. I am using Win 7 Home Premium 64-bit system and have no problems with anything else. When the download from CNET ended, I got an error msg. saying the download failed. So, I opened up VLC Player, checked for updates, got the notice that a major update was available and downloaded it. When the download completed, VLC Player crashed and asked if I wanted to send in a crash report. I clicked on "Yes" and immediately got a new popup window saying that it failed to reach the FTP server.
View 1 Replies
View Related
Aug 25, 2012
i just brought this belkin wireless usb adapter N150 and it is giving me slow download speed. I checked on Speedtest.net and it gives me 0.20 mbps. It is not going to the max speed my max is 3.00 mbps it is not the wireless usb adapter because i checked on another computer and it went to the max 3.00 mbps and i putted it in the same location as my computer so than i realised that it was my computer that is giving slow download speed and it can't find much connections so i tryed it on another computer and it found heaps of connections any idea how to fix this? Plus the signal is excellent. I think there some thing inside my computer that is preventing it from finding lots of connections and making it have slow speed? Maybe it the hard drive im not sure . i just started using wireless i used cable before.
View 1 Replies
View Related
Jul 8, 2012
Here is a funny situation. [URL]
I have no idea how it got there. But there is no place to drag it. I tried changing the resolutions to no avail.
Anyone with a trick to move it around?
View 3 Replies
View Related
Apr 23, 2012
I have a Dell Laptop Core 2 duo Processor. Since tomorrow its giving a blue screen error and rebooting, what to do.
View 3 Replies
View Related
May 12, 2012
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
View 9 Replies
View Related
Sep 2, 2012
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies
View Related
Nov 12, 2011
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies
View Related
Nov 3, 2012
The update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
View 1 Replies
View Related
May 25, 2011
I have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Nov 16, 2009
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies
View Related
Dec 8, 2012
Whenever the Windows loadscreen passes the screen goes black and I can move a cursor around the screen. I have had this happen before and fixed it with bootrec.exe but I can't seem to get that to work this time. Safe mode has the exact same black screen problem.I have done chkdsk and sfc scannow - Didn't fix it.When I boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing. I would like to do this but I can't.I have tried changing the active partition on information in some of these other threads - It didn't seem to work.All disks are healthy according to the DISKPART and Partition Wizard. I have done the HP hardware diagnostic scans and everything comes up fine.
View 1 Replies
View Related
Jul 13, 2011
advent roma 3000 is not starting, when I turn it on, only black screen and the sound of movement, which comes on and off.
View 4 Replies
View Related
Apr 8, 2010
his problem started with XP and I decided to upgrade to win 7 pro.
My PC has a black screen on wake up more times than not. Wake up is set for a login screen normally. My settings are screen saver after 10 mins then send screen to sleep in 20 mins, no hibernation mode, rest machine remains alive, runs 24/7 normally.
I have swapped the power supply and graphics card with ones that work in the same model PC and no joy.
View 7 Replies
View Related
Jul 4, 2009
I had winxp sp3 and Windows 7 7127 x64 on dual boot (xp on c:/ and 7 on d:/)
I replaced xp sp3 with Windows 7 7264 x86 ...at first I couldn't login to Windows 7 7127 because the dual boot seemed to be gone. I fixed it using easybcd so now I have dual boot again for 7127 x64 and 7264 x86 .
The problem is that now when I boot 7127 it has a vista boot screen (probabbly because of easybcd not having a Windows 7 option). How can I change it back to the Windows 7 boot screen? Does anyone have any clues?
View 3 Replies
View Related
Sep 8, 2009
I got an Acer Extensa 5220 laptop with Windows 7 RC and integrated graphic card of Intel. The properties of this graphics don't have the screen rotation option and neither does Windows in the Screen Resolution menu.
I tried to reinstall the system (to RC again and to RTM), downloaded programs such as EEErotate, iRotate, PivotPro; used the Ctrl+Alt+(arrows) combination, upgraded the graphic card to the latest drivers and none of these options worked.
I was wondering if this could be enabled through the Windows Registry Editor.
View 6 Replies
View Related
Jul 16, 2012
I have had two hard drives go out on me within the last six months. I purchased new hard drives and need to figure out how I can get windows 7 back on it. I never got around to making an installation disc (you think I learned from my first crash). I still have the confirmation numbers and have looked on windows . com for a download link. Is this possible or do I need to repurchase windows. I I'd hate to considering my laptops are not even a year old and just spent money on the hard drives...
View 3 Replies
View Related
Jan 6, 2009
I'm using the Windows 7 - 7000 build too.
Well, I have some questions... first, regarding the boot screen when I turn on the computer. I've installed Windows XP SP2 this way: Deleted all the partitions on my hard drive, then did two partitions from the installation program of the CD, then I installed Windows XP in one of the partitions, then I installed Windows 7 in the other partition.
So, I have two SO's running, but, when I turn on the PC only stars with Windows 7. There is no OS selection screen at the very beggining. What could be the problem?
Second, and regarding with graphics. I'm running Win 7 in a HP 530 Core 2 Duo 2GB RAM and this: "Intel Graphics Media Accelerator 950, up to 224-MB shared system memory". When I turn on the slideshow as a Desktop Background, sometimes I see weird lines and the transition is not as smooth. Also, I've installed Warcraft III Frozen Throne and when I play, I see some dark flashes and lines.
This happens because of the "beta" not handling well the GMA 950?? I'm using the drivers that came on with the Windows 7, however, I think I've updated them via Windows Update since it seems that HP and Intel are friends with Bill Gates.
View 9 Replies
View Related
Jan 21, 2012
I have a product key from my laptop but when my computer crashed I couldn't get the old OS back. I still have my product key, how can I reinstall windows 7 without buying a new one?
View 2 Replies
View Related
Jun 30, 2009
I installed Win 7 sometime around Feb, a dual boot with Win XP. But when I upgraded Win XP to Vista, the option for Win 7 disappeared on the boot screen, and the system would boot straight into Vista. So, I used the Startup repair option from the Win 7, and after rebooting it showed the boot screen with W 7, and Vista. But, after I "repaired" it, Win 7 seems to have lost the Win 7 startup screen. It now shows the "Starting Windows" from Windows Vista, then the Win 7 "welcome" screen.
I realize it's not much of a problem, but is there any way I could get the Win 7 startup screen back?
View 1 Replies
View Related
May 8, 2009
I had Windows 7 7057 & XP running Fine, Dual Boot was working fine
On The Same Disk but different partition:
c: / Windows 7 7057
d: / XP
To install the Windows 7 RC 7100 i've formatted the c: partition and installed on it.
No problems at all during installation. Windows 7 RC is running Fine.
XP is lost, so i've tried to add it to the boot options using EasyBCD 1.7.2, FAILED. Then running as ADMINISTRATOR bcedit.exe:
i've done this:
Heres my boot "overview" takem from EasyBCD
bcdedit /create {ntldr} /d "Windows XP"
bcdedit /set {ntldr} device partition=D:
bcdedit /set {ntldr} path
tldr
bcdedit /displayorder {ntldr} /addlast
When i restart the Boot options appears Windows 7 and Windows Xp
But when i choose the XP option and Hit the enter key, the system immediately restarts.
View 6 Replies
View Related
