Cannot Create Data Recovery Disc To Let Me Format C Drive?
Oct 29, 2011
My son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
My sister gave me her laptop to do some repairs. I have been working on this thing for more hours than I wish to admit (mostly scans running like the Ad-Ware scan that is now on hour 7). Between her, and her 2 kids using it its has too much going on that need to be removed.The Laptop has a Vista sticker on it but was upgrade and is running 7 Home Premium. She purchased it from her neighbor who she no longer associates with. So the odds of her getting the 7 Home Premium DVD from her are slim to none.I have went through and cleaned up most of the crap and am working on getting it to run a smooth as new (or better once de-crapped). can I create a restore disc once I get it to the point I am now that will be just as good as any restore disc?
cannot create a recovery disc in acer apire one - following all directions. Cannot get beyond eRecovery management - cannot click on a drive for the CD rom and cannot click on start.
I bought a HP Laptop with Windows 7 Home Premium pre-installed. I got rid of any bloatware and as I'm typing this, Macrium is imaging my C drive to a network drive. Now my question is, would I be able to completely format the computer, set up my own partitions and install Windows on one of them? Preferably a fresh and clean version but I wouldn't mind the bloatware one either. Things to consider, I don't have a disk-drive so it'd have to be done with a thumbdrive; I have not been able to find the actual O/S product key, if someone could tell me where to locate it.
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
I bought a ASUS K45VM with win7-64bit OS 3months ago but had not create any recovery disc yet. I had since unable to create anymore recovery disc as there is a prompt message from ASUS recovery burner software that show "recovery partition does not exist".
i am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
how to recover from my laptop hard disk. after working properly, suddenly it stop working, after restart of laptop, it stop working. and it show error sector 0 hard disk. will you tell me how to recover my data from the hard disk.
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
Is it possible to use the upgrade disc to format C drive (it has the Windows 7 RC activated, I can also reinstall Windows Vista if I have to), and do a clean install?
my SSD that has my windows partition on it died. So, I pretty much need to do a image restore from the windows back up program. I have an image that's only a week old and there isn't anything that recent that I can't live without. I have the new drive ready, but I'm sort of confused with the process. Do I need to first format and partition this new drive, or will the image restore do that for me as part of the process? I could do a format on another machine and move it over, but I'm not clear if that's a good idea or not.
i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I formatted my C: (win 7 64 bit os), bt on d way realized that my most imp data was kept hidden under C:UsersPrashant , but couldn't help stopping the format.
Now, since the C: drive is formatted , I can't access C:UsersPrashant , so is there any way to recover back my "mostttt imp data"..
Is there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
I brought windows 7 pc before 6 months. I did not know even abcd of computer at that time. I installed lots of software and games without having proper knowledge. Even i delete registry files thinking that, they are not useful to me. so i got serious problems on my pc. I finally format my pc a month before. As i describe earlier without having proper knowledge, just reading few post on internet i just insert my windows 7 cd, and install it like normal software without booting cd. It install smoothly without having any problems. The only thing was that, it doesn't format c drive instead it create windows.old folder. I delete it safely reading post from internet.Now the problem is for speed up my pc i decide to try xp on it. so i brought xp cd. I understand that without booting it is not installing xp on my pc. So i follow normal procedure of booting cd(Restarting pc and pressing f12). There was options like boot from hard drive, LS120, CDROM . I select cdrom. After that there was message "Verifying operating system Boot from cd/dvd. " for 2 second. After that it take me to the normal windows start up. I try these lots of time but i am unable to boot cd.I even try it with windows 7 cd but i am steel getting same message.Does this is because my first wrong formatting of pc.
I had bought new laptop. At that I have two drives and I locked one of them with the bitlocker and later on I just deleted that drive from disk management. Now I cannot create partition, I have more than 160 GB and system does not allow me to install a fresh copy and neither it allows me create a partition. What should I do?
Get error code 0xCOAA0301 returned from drive. Found it's a known problem so tried solutions inc Windows troubleshooter. It says fault fixed and and drive shows up in explorer and will play music cds. As soon as screen for repair disc comes up drive is shown as disconnected even though it can be heard running. Netbook tries to create disc then returns error message.
My power supply on my old comp died, so it was time to upgrade computers, I went from running windows XP to windows 7 now. I saved my old "previously upgraded" 320g wd internal drive to recover the data to my new machine. I got an external drive enclosure, installed everything but windows is telling me I don't have "access" to the drive. When I go into disk management, it sees the drive but it's not initialized, nor will it let me initialize it when I try.
I have a usb flash drive with sandisk u3 software that was password protected. My home computer was XP. My work computer is windows 7. When I put the flashdrive in it could not read it and asked if i wanted to download the sandisk windows7 compatible software. so i said yes. When the question came up if I wante to format my usb drive. I said no. Now it is not seeing any of my original data. Either under xp or windows 7. I have the turbo tax data files from last tax season that i did not make a back-up, that was included. how I can recover the USB data?
I happen to have reinstalled by mistake a new Windows7 OS on a drive (I had two drives one with an OS and another with a bitlocker drive used for back up, both drives were IDE drives and the bitlocker was under slave mode if that hosted very important data and was encrypted by Bitlocker. How to recover this formerly encrypted data? The drive is now recognized as an active healthy partition with an associated drive letter (different from the original one). I don't have the bitlocker key.
Hard drive in 2009 Satellite P500 series notebook, Windows 7 Home Premium X64, is pre-Advanced Format Drive. The 2008, 500 GB Hard drive failed with SMART warning at every boot. (Pre-Advanced Format Drive) Replace with new 500 GB HDD (AFD) Advanced format. Repair with Toshiba supplied 3 Disc set "Recovery Media Satellite P500 series"... Boot okay, no network, Device Mgr shows 6 yellow exclamation marks, but properties all show "The device is working properly". Download latest drivers and install... no change in symptoms. Scrounge up another 2008 (320 GB) Hard drive, and the Recovery Media installs fine. System boots and everything is working great.Image Backup with three different programs, (PQ Drive Image (GHOST), Acronis, Active@Disk Image)Restore to new 500 GB (AFD) hard drive Continue to configure and customize system, and install all the latest updates. Install again, the new AFD hard drive into computer. Machine seems okay.. Use it for a couple days. Discover that Windows Update does not work. Says service is not running. but it is. I spent most of a day trying to resolve. can't fix it. Download an install a stand-alone fix does not work either.
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
I currently have a .exe OS disc but it really does me no good when I have a formatted HDD. Is there anyway I can turn this disc into a .iso so I can boot up with it?
