My sister gave me her laptop to do some repairs. I have been working on this thing for more hours than I wish to admit (mostly scans running like the Ad-Ware scan that is now on hour 7). Between her, and her 2 kids using it its has too much going on that need to be removed.The Laptop has a Vista sticker on it but was upgrade and is running 7 Home Premium. She purchased it from her neighbor who she no longer associates with. So the odds of her getting the 7 Home Premium DVD from her are slim to none.I have went through and cleaned up most of the crap and am working on getting it to run a smooth as new (or better once de-crapped). can I create a restore disc once I get it to the point I am now that will be just as good as any restore disc?
cannot create a recovery disc in acer apire one - following all directions. Cannot get beyond eRecovery management - cannot click on a drive for the CD rom and cannot click on start.
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
My son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
I bought a ASUS K45VM with win7-64bit OS 3months ago but had not create any recovery disc yet. I had since unable to create anymore recovery disc as there is a prompt message from ASUS recovery burner software that show "recovery partition does not exist".
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
I currently have a .exe OS disc but it really does me no good when I have a formatted HDD. Is there anyway I can turn this disc into a .iso so I can boot up with it?
I have Windows 7 64b with a Toshiba Portege R700. I cannot create a repair disk, I receive a parameter error. Like it doesn't recognize the CD drive. I tried un-hiding the administrator account and tried with that account but no luck either. I also tried to find the recovery folder with the cmd prompt but nada... it cannot open the boot configuration data store.
How do I create a reinstallation disc for W-7 which was preinstalled on my Lenovo computer? Note: this would be in case my hard drive fails so that I can reinstall W-7 on a new hard drive. My first computer came with the disc (Win-ME). My second computer had a procedure where I was prompted to create/burn a disc of W-XP when I first started the computer. This time - nothing. I contacted Lenovo and they said I would have to pay $40 for such a disc!! Isn't there some way I can do this myself for free? I asked Lenovo about creating a System Image disc but they said it wouldn't work because I couldn't boot from it. (Note: the computer did come with a CD which has the drivers on it).
my laptop has been acting strange recently and i cant seem to open or delete some folders , it tells me im not the proper owner. There is only 1 owner and 1 account on my latop and thats me , full admin.This problem started after fiddleing around with Media Center and sharing with my xbox. I couldnt resolve the problem so i have decided to use my recovery disc.I built the disc back when i recieved the laptop . The problem here is i dont know what exactly the process is to reinstall everything.Do i just insert the disc 1 by 1 and run them?
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
The disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
I have a new sata3 SSD drive on which I want to install Windows 7. The PC has an existing build of Windows 7 on a different disc which i want to reformat & use for data. I tried this previously and ended up with a dual booting system. Trying to remove the old Windows 7 installation and format that disc created much trouble so now I'm starting again, how to: Install Windows 7 on the new SSD disc (I'm assuming this will work ok as I've done it before), Have the system recognise only the new Windows 7 installation at boot & not the old Windows 7 installation so I don't have to select which OS to use, Reformat the old Windows 7 disc and remove any boot references that it might hold.
Okay so I have searched online for how to create a Windows 7 Boot Disc, but to no avail. I have blank dvds, I have a legit operating system, and I have an activation code. I have no idea where to go from here and find boot files or installation files or create ISOs etc.
i have 3 pc's with windows 7 installed on all. i would like to format one of them so all memory is wiped clean but im wondering if there is a way of doing this without losing windows 7 or a way of getting windows 7 again after with no disc. the discs wernt supplied with all 3
My friend's Sony Vaio recently stopped working. It's displaying a black screen and the words "Operating system not found." I tried to do a system restore on it but half-way through it reported an error and aborted. Since a recovery disc wasn't provided or made, we bought one from a website provided by Neosmart.net and burned it onto a blank CD. The CD starts up but the problem is that it can't find the Windows 7 operating system. It was the only OS installed on the hard drive.
How can I do a system recovery without a disc ?In my drive D , there is something called " recovery " I guess it is a partition .But when I open up recovery manager , It asked me to insert a disc .
Just bought a ASUS laptop with 7 home premiun 64 bit on it. I do have a Windows 7 Pro installation disc that I have for my scratch built desktop. Can I use that disc to reinstall windows on the laptop if need be and just use the license # from the laptop and I assume microsoft will just turn off the added features of Pro??? or do I have to create that 4 dvd recovery disk?? Also if ya know this is a ASUS A53E that has a super multi DVD drive is that dual
I got a new laptop and it's full of crappy software, I'm lazy so I don't want to take the time to uninstall it. So I just want to do a clean install of windows, but the laptop didn't come with a recovery disk
New to the forums, kind of a novice with computers and I'm at a loss with what to do.Okay so my Acer Aspire 7551 running Windows 7 Premium Home 64bit was acting funny so I decided to do a system restore. So I put in the Acer Recovery Discs that I made when I first purchased the computer. Now I have used this discs before with no problems at all. So I put the first disc in, selected the option to do a complete system restore back to factory defaults. It's my understanding that this completely wipes the OS off the HDD. So the first disc ran with no problems. I put the second disc in and got an error message Fail to copy to HDD: D:PatchModulesWIncre.002WOP000460OX0TCB111.SWM Press OK to continue I press OK to continue, and it boots back to the BIOS screen. Then it goes to a black screen and says BOOTMGR IS MISSING. PRESS CTRL+ALT+DEL TO CONTINUE.So I put the recovery disc back in to try the process over again and same thing happens.
I am trying to install windows 7 onto my new ssd and i have a recovery flash drive it loads up fine but doesn't give me the option onto which partition im installing i have a hp dv7 that has two hard drives i have a healthy windows partion on my old hdd and my sdd i want to put the same copy of windows the files show up on the drive like it was installed correctly and shows mbr partion but doesn't bood (on ssd) also it partioned my 128 gb to 80gb partiion in the middle and 10 gb at beginning of unallocated space and the rest unallocated at the hopefully i have win 7 home premium i have the key but no disc of os just recovery flashdrive
i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
My samsung series 7 has a samsung application that lets me create a disc with all my drivers. I wish i had known this before i got a virus/malware infection because the laptop didnt come with a disc on its own.
I am wondering, if i use this utility to create this disc will driver files have a chance of being damaged/corrupt?
