I bought a ASUS K45VM with win7-64bit OS 3months ago but had not create any recovery disc yet. I had since unable to create anymore recovery disc as there is a prompt message from ASUS recovery burner software that show "recovery partition does not exist".
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
My sister gave me her laptop to do some repairs. I have been working on this thing for more hours than I wish to admit (mostly scans running like the Ad-Ware scan that is now on hour 7). Between her, and her 2 kids using it its has too much going on that need to be removed.The Laptop has a Vista sticker on it but was upgrade and is running 7 Home Premium. She purchased it from her neighbor who she no longer associates with. So the odds of her getting the 7 Home Premium DVD from her are slim to none.I have went through and cleaned up most of the crap and am working on getting it to run a smooth as new (or better once de-crapped). can I create a restore disc once I get it to the point I am now that will be just as good as any restore disc?
cannot create a recovery disc in acer apire one - following all directions. Cannot get beyond eRecovery management - cannot click on a drive for the CD rom and cannot click on start.
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
My son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
I have successfully created a Windows 7 Repair Disc using the "Create a system repair disc" from Control_Panel->Backup_and_Restore
When I attempt to reboot, using the Repair Disc I have just created, everything appears to work - Loads files, Windows wavy flag, etc. however; just as I am about to get into the real stuff I receive the following message:
This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
This is exactly the ssame message I get if I boot from the original Window 7 DVD and elect Repair option
This is really important to me as when I use F8 during Post I do not have the options to repair the system here either and it freaks me a bit to be unable to repair the system should anything happen
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
My linkMy errors and updates are all stated there, however I will also continue anything I restarted the process. This time, during the startup of the computer I repeatedly tapped Esc. then selected my P2 HL-DT-STDVDRAM GT34N and pressed enter. This was followed up by the usual "Windows is loading files..." progress bar. Afterwards, it sat at the "Starting Windows" screen for eight minutes. It loads a basic ASUS wallpaper and cursor. I am then confronted with the prompt: AI RECOVERY-Are you ready to restore this image yes/no?I select yes.AI RECOVERY:Restoring it will overwrite your hard drive. Do you want to continue? Ok/cancelI select ok. The AI Recovery Restore begins-This DVD will help you recover hidden partition. Check the AC adapter connection and do not interrupt the restoration process.
I have a ASUS laptop which crashed after AVG installation. Did everythying (changed the AVG folder name etc). Now stops at CLASSPNP.SYS in safe mode. Also cant go to Repair ( get message "Windows is Loading Files") and nothing happens....
I dont mind formating and doing complete reset to Factory settings. (I have copied all data). However, I dont have CD for restoring Windows. F9 does not work.
Through midnight manager I can see the folder WindowsImageBackup on my D drive (80GB). Can I use this one (how?)
I have an ACER Asprie 57347, recovery disc doesn't work. Every thing I read says hold down ALT then keep hitting F10, all that does is make the laptop beep.
i just got a new HP laptop. I already figured out how to create a recovery disk. Now how can i safely remove all the bloatware? do i just go to control panel and remove programs one by one or is there an easier way?
My laptop came with win 7 x64 already loaded, but had a huge(334G)D: partition on it. That seems to be what is preventing me from making the disk set. At least that is what the error message says.DO I need to just scroll the forums, and delete and then find that 334 space?
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
how to recover from my laptop hard disk. after working properly, suddenly it stop working, after restart of laptop, it stop working. and it show error sector 0 hard disk. will you tell me how to recover my data from the hard disk.
I currently have a .exe OS disc but it really does me no good when I have a formatted HDD. Is there anyway I can turn this disc into a .iso so I can boot up with it?
I have Windows 7 64b with a Toshiba Portege R700. I cannot create a repair disk, I receive a parameter error. Like it doesn't recognize the CD drive. I tried un-hiding the administrator account and tried with that account but no luck either. I also tried to find the recovery folder with the cmd prompt but nada... it cannot open the boot configuration data store.
How do I create a reinstallation disc for W-7 which was preinstalled on my Lenovo computer? Note: this would be in case my hard drive fails so that I can reinstall W-7 on a new hard drive. My first computer came with the disc (Win-ME). My second computer had a procedure where I was prompted to create/burn a disc of W-XP when I first started the computer. This time - nothing. I contacted Lenovo and they said I would have to pay $40 for such a disc!! Isn't there some way I can do this myself for free? I asked Lenovo about creating a System Image disc but they said it wouldn't work because I couldn't boot from it. (Note: the computer did come with a CD which has the drivers on it).
my laptop has been acting strange recently and i cant seem to open or delete some folders , it tells me im not the proper owner. There is only 1 owner and 1 account on my latop and thats me , full admin.This problem started after fiddleing around with Media Center and sharing with my xbox. I couldnt resolve the problem so i have decided to use my recovery disc.I built the disc back when i recieved the laptop . The problem here is i dont know what exactly the process is to reinstall everything.Do i just insert the disc 1 by 1 and run them?
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
The disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
I have a new sata3 SSD drive on which I want to install Windows 7. The PC has an existing build of Windows 7 on a different disc which i want to reformat & use for data. I tried this previously and ended up with a dual booting system. Trying to remove the old Windows 7 installation and format that disc created much trouble so now I'm starting again, how to: Install Windows 7 on the new SSD disc (I'm assuming this will work ok as I've done it before), Have the system recognise only the new Windows 7 installation at boot & not the old Windows 7 installation so I don't have to select which OS to use, Reformat the old Windows 7 disc and remove any boot references that it might hold.