how to recover from my laptop hard disk. after working properly, suddenly it stop working, after restart of laptop, it stop working. and it show error sector 0 hard disk. will you tell me how to recover my data from the hard disk.
View 1 Repliesmy laptop has gone out of order,however,I have got a new one and I want to transfer the data from the old one to te new one.Please note that the old one doesn't start up at all.
View 1 Replies View RelatedMy son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
View 2 Replies View RelatedI have a hard-disk of 250gb with load of nearly 200gb. Unfortunately there is no backup and the hard-disk not detected in another computer, means possibly damaged. Is there any process to save some or entire data from the hard-disk. It consists of some important data.
View 5 Replies View RelatedI've created the recovery DVDs, but unbeknown to me at the time - you're only allowed to create one set. What i'd like is to put this onto a USB stick.Currently i have:DVD #1 - Boot Media: (312mb)The boot DVD containing "BOOT" folder, BootMgr file which is quite small & Winre.Wim at about 300mb.DVD #2 - Data DVD #1: (4.03GB)factory recovery folder, recovery folder & Autorun fileDVD #3 - Data DVD #2: (3.87GB)factory recovery folder & recovery folder (NO autorun file)DVD #4 - Data DVD #3: (3.04GB)factory recovery folder, recovery folder, LenovoQDrive file, qdrive icon file.My USB stick is 16GB capacity.So basically i'd like to make the USB stick the recovery media. I can't do this from the laptop as Lenovo only let you create one ......... so how can i do this
View 9 Replies View RelatedThe hard disk of my Gateway NV78 notebook pre-installed with Windows 7 HP has crashed. I have made the recovery discs in 3 DVDs . I will be buying a new hard disk. I would like to know whether it is possible to install Windows 7 HP on the new hard disc from the recovery discs or I have to go in for a new installation disc.
View 4 Replies View RelatedI have an ACER Asprie 57347, recovery disc doesn't work. Every thing I read says hold down ALT then keep hitting F10, all that does is make the laptop beep.
View 2 Replies View RelatedWhere can I download a recovery disk for a toshiba satellite L505-LS5006
View 1 Replies View Relatedi have an acer laptop and i need recovery disc to start it up again--can i use recovery discs from a toshiba and do the same?
View 4 Replies View RelatedI bought a ASUS K45VM with win7-64bit OS 3months ago but had not create any recovery disc yet. I had since unable to create anymore recovery disc as there is a prompt message from ASUS recovery burner software that show "recovery partition does not exist".
View 1 Replies View RelatedI am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies View Relatedcompressed c drive on acer 5515 laptop no recovery disc to boot
View 1 Replies View RelatedMy motherboard crapped out on my HP dv6000 a week ago and so I decided it was time to upgrade. I just ordered a new dell latitude e6410 so I'm really excited!
Anyway, my dv6000 will not charge and is completely dead. I am trying to figure out the easiest and most economically sound way to get everything off my hard drive and on to my new machine.
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies View Relatedproblem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.
I know for sure that problem occured after i fresh installed to windows 7 from xp pro. I have also tried to uninstall the usb root hub but still give me the same driver as it was.
i have taken off the two HHD from my 6 Tera External ( WD ),put them to my computer but they didn't work, then immediately i returned them back to the external unit, but the RAID0 was corrupted & it's didn't work, i don't care about it but the DATA inside it.I used Data Recovery program it recovered the data tree, but when i recovered the data mostly videos with their right size, but one i opened more than 10 files none of them worked.
View 9 Replies View RelatedMy laptop has Windows 7 and it corrupted due to virus attack. Now I cannot access external USB device, such as external hard disk. I cannot even connect to internet. I plan to format everything and then re-install the OS, but need to back up my data first. How can I back up my data (250GB) without access to USB drive and internet?
View 2 Replies View RelatedMy laptop has Windows 7 and it corrupted due to virus attack. Now I cannot access external USB device, such as external hard disk. I cannot even connect to internet. I plan to format everything and then re-install the OS, but need to back up my data first. How can I back up my data (250GB) without access to USB drive and internet?
View 2 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View Relatedmy memory card is corrupted..but its data and pict are very important so how can i recover
View 4 Replies View Relatedif my operating system like xp or win 7 is corrupted/damaged which it can't be started to get/recover my files what software should i use
View 4 Replies View RelatedMy acer laptop using windows 7 will not startup. When I start laptop it start running. While window black screen is running a blur box window comes up stating hard disk security in this screen it state it is locked. The only way to get out of this screen is to hit esc the only thing working is the F2 I can use this change settings what ever. However, none of the F12 recovery will complete.
View 1 Replies View RelatedI'm working on a friends PC, a win 7 64 bit on a Lenovo Ideapad model B560. This thing has One Key Recovery installed.. Instead of having factory restore disks this tool recovers the system to factory defaults via a hidden partition that contains the restore data.More info about One Key Recovery here What is OneKey Recovery? - Yahoo! AnswersYou cannot change or resize partitions or One Key Recovery wont work. This PC had malware on it and can't boot into normal windows mode (that's the main problem) .. but it will boot into safe mode. I removed the malware with Malwarebytes but the PC still wont boot in normal mode. I tried to use One key Recovery but it refuses to work in safe mode.
One Key Recovery sets up the PC with 3 separate partitions. A C drive for Windows and pre-installed Lenovo software, a D drive that's large for data and the hidden recovery partition. I don't want to cripple this functionality so I can't do a complete reinstall of windows from a win 7 dvd. I thought I'd use a win 7 dvd to do a repair install instead - hoping this wont mess with the partitions but just fix the windows errors keeping it from booting normally. I'd be using the Win 7 64 bit with service pack 1 integrated from Digital River.I want to know before I try this - will it work? Will it fix the errors without messing with the partitions? If so, perhaps after it's finished, I will then be able to use the One Key Recovery option if I need it. I have to verify this before I try it and mess something up that I can't recover from
I recently installed Windows 7 x64. When I plugged in my external USB drive, it brought up the scan disk box and said I should check for errors. Ran it, and later I found some of my folders/files were corrupted. Tried a couple unerase utilities to get my critical info back, and failed. So, I ran scandisk again. Now almost all the files read as corrupted and it asks me to format the hard drive.
View 3 Replies View Relatedhow to improve my computer rating score of 5.9 while still maintaining a decent overall PC temperature; I understand that, that is the highest windows 7 will allow? rating is low due to low disc data transfer. How to improve?
View 6 Replies View Relatednot show for disc data open data to tray open
View 1 Replies View Relatedmy laptop has been acting strange recently and i cant seem to open or delete some folders , it tells me im not the proper owner. There is only 1 owner and 1 account on my latop and thats me , full admin.This problem started after fiddleing around with Media Center and sharing with my xbox. I couldnt resolve the problem so i have decided to use my recovery disc.I built the disc back when i recieved the laptop . The problem here is i dont know what exactly the process is to reinstall everything.Do i just insert the disc 1 by 1 and run them?
View 4 Replies View RelatedAt the moment, my Gateway M-Series laptop which has Windows 7 32bit will not do a system restore! It says my local disc ( C: ) has errors, it cannot check these errors so that I can restore the computer
My computer doesn't want to connect to the Internet also (lucky for me I have other means of accessing the Internet) and every time I open Chrome or any of my software it says there are corrupted files and the disk check will not run because there are corrupted program files? I haven't downloaded anything of late I keep a fairly clean hard drive, but when I went into system restore it set one of the restore points as 'DirectX Installed' which incidentally I haven't installed and isn't in any programs list.
After some tweaking I found I was able to check the disk and restore the computer but I would still like to know if any of you have any input on how to avoid future problems!!
I copied several large files (between 1 and 4 GB) from one USB hard drive to another. At the target destination several of the files had defects. They were in general not completely unreadable. Most could still could be opened but had clearly corrupted data. how can this be detected/prevented. Doesn�t Windows 7 have some kind of an integrity check when copying files? Also is there any good software to compare files for being exactly identical down to the last bit? Ideally with the capability to compare whole folder contents so that it hasn't to be done file by file.
View 8 Replies View Relatedhaw can i getting data from corrupted external hard disk
View 2 Replies View RelatedHow to recover files if the hard drive is corrupted
View 1 Replies View Related