Windows 7 Home X64 SP1 Repair Disc - Unable To Start Recovery
Nov 10, 2011
I have successfully created a Windows 7 Repair Disc using the "Create a system repair disc" from Control_Panel->Backup_and_Restore
When I attempt to reboot, using the Repair Disc I have just created, everything appears to work - Loads files, Windows wavy flag, etc. however; just as I am about to get into the real stuff I receive the following message:
This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
This is exactly the ssame message I get if I boot from the original Window 7 DVD and elect Repair option
This is really important to me as when I use F8 during Post I do not have the options to repair the system here either and it freaks me a bit to be unable to repair the system should anything happen
View 2 Replies
ADVERTISEMENT
Jun 29, 2012
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies
View Related
Sep 3, 2012
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies
View Related
Jan 3, 2010
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
View 9 Replies
View Related
Jun 23, 2012
I'm trying to get my nephew's laptop (acer aspire 5749) to boot up (apparently battery ran out during shutdown and not worked since) - on power up it gives the option to repair or start as normal. Repair takes you (eventually) to a grey screen with wavy ribbons at the top, a moveable mouse cursor but nothing else happens (even after leaving it for 24 hours). "Start windows normally" takes you to the loading windows screen, then it reboots itself (and the repair options come up again...).
Have booted with a windows repair cd but the same grey screen/wavy ribbons thing happens again and nothing happens (even after leaving it 24 hours).
Booting into safe mode gives no joy either and stops the boot up process during the drivers loading up. It used to stop at one of the AVG drivers so I used the AVG repair utility (midnight commander) to rename all the AVG stuff but then it just stops at another driver instead (now it stops at classpnp.sys).
I've done the memory check on the AVG disk which passes fine so I'm guessing I need to run some checks on the hard disk itself. I've just downloaded the Ultimate Boot CD ( Ultimate Boot CD - Overview ) but don't know which of the utilities you'd recommend I try first?
View 7 Replies
View Related
Jan 19, 2013
I bought a recovery disc however I can not even log on to get to the start menu, the system acts like it is logging me on then logs me right back off. This all started when I got a virus. What can I do now?
View 2 Replies
View Related
Feb 1, 2013
I bought a ASUS K45VM with win7-64bit OS 3months ago but had not create any recovery disc yet. I had since unable to create anymore recovery disc as there is a prompt message from ASUS recovery burner software that show "recovery partition does not exist".
View 1 Replies
View Related
Dec 17, 2012
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies
View Related
Jan 21, 2013
I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to run chkdsk before booting, I would let it run, and it would boot. However, yesterday I got the 'windows failed to start - a recent hardware change may be responsible' error message, and giving the option to try starting windows normally (which fails: there is a flash of BSOD and then screen goes black, and computer restarts, arriving at same 'failed to start' error). The other option is to run system repair, which also does not work: it takes ages to bring up a dialog box that searches for errors, but I have let this run for hours and it remains stuck. Tapping f4 to bring up samsung recovery also results in a stuck screen. Tapping f8 to boot to safe mode does not work either.
My main concern is having a working computer, and I can't really afford costly repairs or a new netbook. I got this one used about 1 1/2 years ago and it has no cd drive/OS boot disk (windows 7 starter came already installed). What should I do? Can I fix the hard drive, or should I replace? I am not at all technically skilled and have limited knowledge but an endless capacity to learn. I called samsung and they suggested I replace the hard drive to the tune of $100-$300 for parts alone, which is too expensive for a $100 netbook.
View 3 Replies
View Related
Jun 10, 2011
A client of mine (I'm an IT summer temp in a production facility) recently contracted the Windows 7 Recovery virus and contacted me to fix it. Having encountered the XP version recently and resolved the issue, I was able to easily remove the virus and associated rootkit. The difference this time was that unhide.exe failed to restore the start>all programs menu shortcuts, although it did manage to restore the folder structure. I read through and followed the instructions of another thread here: [URL]. Which did not resolve the issue. The output given by SystemLook is as follows:
SystemLook 04.09.10 by jpshortstuff
Log created at 09:14 on 09/06/2011 by debra
Administrator - Elevation successful
View 3 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
Jun 23, 2012
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Jan 6, 2013
I have 2 laptops. One, a Sony Vaio has a working Windows 7 home premium OA 64 bit. And another Toshiba Satellite that HAD Windows 7 home premium OA 64 bit. The hard drive in the Toshiba went fubar and is unrecoverable. None of the sectors are readable except the partition table and SMART says that drive failure is imminent. I installed a new blank hard drive in the toshiba.Can I use my Vaio Windows 7 to get this Toshiba Windows 7 working somehow? I created a repair disc on my Vaio but I don't know what to do next for the Toshiba. No the Toshiba does not have any backup recovery disks made from it but I can make whatever discs with my Sony Vaio. I have not done system recovery on windows since the old NT days. It looks like MS made this harder than it was. All I had to do was use my install disc.
View 4 Replies
View Related
Aug 19, 2012
I have a toshiba satellite c655 laptop with windows 7 64bit going thru some issues right now. Long story short, windows wont boot. I've tried a myriad of repair options with no success, and am now trying a burned repair disc from another windows 7 64bit computer. I boot from the disc, and everything is fine. I hit the first 'next' button. When it reaches the second menu screen that's supposed to show your OS, it just doesnt load. The cursor becomes a little blue circle that shows its loading, but never does. I left it there for at least 10 hrs to no avail.
View 9 Replies
View Related
Jan 15, 2013
I just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies
View Related
Dec 28, 2011
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies
View Related
Nov 3, 2012
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
View 6 Replies
View Related
Aug 4, 2012
I have an emachine comp.I would like to burn recovery discs.but I dont have a clue where to start
View 1 Replies
View Related
Oct 9, 2011
i have 3 pc's with windows 7 installed on all. i would like to format one of them so all memory is wiped clean but im wondering if there is a way of doing this without losing windows 7 or a way of getting windows 7 again after with no disc. the discs wernt supplied with all 3
View 3 Replies
View Related
Aug 24, 2011
Just bought a ASUS laptop with 7 home premiun 64 bit on it. I do have a Windows 7 Pro installation disc that I have for my scratch built desktop. Can I use that disc to reinstall windows on the laptop if need be and just use the license # from the laptop and I assume microsoft will just turn off the added features of Pro??? or do I have to create that 4 dvd recovery disk?? Also if ya know this is a ASUS A53E that has a super multi DVD drive is that dual
View 3 Replies
View Related
Oct 3, 2011
I try to use the Windows diagnostic tools etc, system restore, command prompt, memory test and when I choose say system restore, no text is shown in the dialogue box. Again no text is shown in other dialogue boxes that pop up.
View 1 Replies
View Related
Oct 10, 2011
Got my stuff ready to reformat, only to realize I don't have a Windows 7 recovery disc.I created a System Repair Disc using Backup & Restore in control panel but I'm unsure whether this is what I need to do a complete reinstall?I wanted to follow this guide to do a complete reformat, not a recovery.
View 2 Replies
View Related
Jul 26, 2012
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.
View 9 Replies
View Related
Dec 9, 2012
I intend to load Ubuntu 10.04 onto my home desktop machine while retaining Win XP as well. I'll be creating a dual boot system, in other words, and then using XP only to run Photoshop. The rest of the stuff I need to do gets done just fine with Firefox, Open Office and Thunderbird.
The discussions about how to do this indicate a "restore disc" for XP should be created prior to starting, unless you still have the disc that came with the system.
I have the original Dell OS "re-installation" disc, still in the envelope with the key printed on the back.
My question: is the "re-installation" disc that came with the computer the same as a "recovery disc"? If not, what is the difference? And how do I go about creating a "recovery" disc.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 13
[Code].....
View 2 Replies
View Related
Feb 11, 2012
new hp windows 7 I'm trying to create recovery disc and I started it and didn't get the dvdr in fast enough and it started,you can't stop it once it starts. So after it copied the partition or tryed to. I started and put the dvdr in this time but I wonder if I didn't ruin the part of the drive I need to make the recovery disc. How can I check to see if the dvdr I had in there has the information I need in case down the road I need it? Would I just put the dvdr in the computer and open it at the hard drive? Maybe see the files there? I had w-xp before and I had no trouble making recovery disc there.
View 7 Replies
View Related
Apr 22, 2011
I am in need of a Windows 7 rec disc. I can't download one because my laptop keeps telling me to insert it but I don't have one!
View 2 Replies
View Related
Nov 12, 2010
I desided to reformate my computer, farly new computer and windows 7. so im using the 3 recovery disc that I burned when I first got the computer. so now i deside to reformate, started reinstalling...it went through disc1, when it asked for recovery disc 2 (at around 50% of installing) I put it in and it just spits it back out and doesnt want to read it, now im stuck the computer wont even boot up fully (wont boot to desktop, however I can access the bois?I think either when I copied the disc it didnt get copied right (disc2)because disc1 worked fine) or something is just wrong with the disc 2 dvd (has no scratches on it though) but im stuck how can i get it to work or even get windows to start back up to the desktop?
View 6 Replies
View Related
Aug 1, 2012
Can anybody help me with a link to download repair Disc of Windows 7 Ultimate 64 bit SP 1
View 7 Replies
View Related
Dec 19, 2010
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
View 8 Replies
View Related
Apr 4, 2012
i have a Acer Aspire 5755g-6841 laptop, and yesterday i started getting this message. "bootmgr is missing" after i tried to do a system restore. The attempt at the system restore ended bad with it not finishing and me having to reboot my laptop. It was stuck at 99% completion for 5hrs. Now when i use 2 different restore discs that i made for windows 7 64-bit from a downloaded iso, i get stuck in the recovery options menu with the blue loop never ending and no OS being loaded to be selected. Also anytime i try to use the eRecovery from pressing ALT+F10 it gets the blue loop there and never loads.
View 3 Replies
View Related