Cannot Create System Repair / Recovery Disc - Parameter Incorrect (0x80070057)
Jan 3, 2010
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
View 9 Replies
ADVERTISEMENT
Jan 21, 2012
I cannot get windows to update. I have used windows update agent fix it tool, but it always gets an error when trying to run it. I have tried turning off all firewalls and AV programs, but still cannot update. When going to services.msc, it shows update service as stopped. when I try to start it, I get the message:
'Windows could not start the windows update service on local computer. Error 0x80070057: the parameter is incorrect.'
When I click check updates under the windows update program, it says cant update due to service not running. I have checked my ipv6 and ipv4, and both are setup to automatic I have tried using tdsskiller to ensure no rootkits are present, and I'm clean. I ran AV scans and spyware scans, but all come up clean. I have ran system file checker, and chkdsk, but both were fine.
View 14 Replies
View Related
Dec 17, 2011
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
View 2 Replies
View Related
Dec 31, 2011
Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
View 5 Replies
View Related
Aug 30, 2012
hey how do u create a system repair disc?
View 1 Replies
View Related
Jan 15, 2009
How to Create a Windows 7 System Repair Disc ?
View 0 Replies
View Related
Jan 26, 2012
i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive
View 4 Replies
View Related
Oct 21, 2009
I'm using Windows 7 ultimate RTM and cannot create a repair disc image anymore. i get the error code 0x80070057 incorrect parameter with a dvd inserted. I'm really not sure what's causing this..
View 9 Replies
View Related
Jun 29, 2011
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
View 2 Replies
View Related
Mar 21, 2011
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
View 4 Replies
View Related
Aug 30, 2012
when I try to burn a system repair disc the program stops working
View 1 Replies
View Related
Aug 20, 2012
Microsoft Windows Repair Disc refuses to work. What should I do to allow creation of a System Repair Disc?I created (I think successfully, as the Finish window seemed normal) a System Image on a USB hard drive. The image was created overnight.After the image was created, while still inside Backup and Restore, I received the sub-window, asking if I wanted to Create a System Repair Disc. I inserted a new DVD, and clicked to start the process.The "Create a System Repair Disc" subwindow opened, to allow the drive selection.Immediately thereafter, (with the drive selection window text greyed out) before the I could even see the drive selection drop-down arrow, a failure window opened on top of it:Microsoft Windows Repair Disc has stopped working?If the debug option was chosen, the same window appeared, but without the Debug option, leaving only the Close the program option.I rebooted, and via Backup and Restore, again tried to Create a System Repair Disc. This failed the same way. I rebooted, and used another freshly unpacked DVD. The same failure occurred.Following forum post suggestions, I have subsequently successfully burned and verified a DVD on the DVD drive.I use Windows 7 Professional on an Asus U50-F.Yesterday -- maybe a coincidence -- before this failure I also installed (successfully) all of the most recent Windows Updates.
View 2 Replies
View Related
Nov 14, 2011
Windows 7 automatic update downloads KB2586448 security update and sp1 but install fails. I have been trying to get theese updates on for 8 months. Tried from microsoft website, tried dissabling antivirus, spyware, tried in safe mode.
View 2 Replies
View Related
Aug 11, 2009
I have an error when trying to change the disk drive letter of my hard drive. Is there anything I can do, like download a hotfix or change some setting or something...?
View 5 Replies
View Related
May 20, 2011
I'm trying to shrink my hard drive (500 GB) so I can try out Mandriva OS but I can't, whenever I try to do so i keep getting parameter is incorrect. Any suggestions guys? Running Windows 7 Ultimate 64-bit. Oh yeah, consider this my 2nd question, before I was trying to make a new partition I tried installing Mandriva via the disk, but it filled like 50 GB worth of files and I can't find those files.
View 1 Replies
View Related
Aug 24, 2011
I drag a file from a device to another on my computer and I get the error 87 : incorrect parameter. What parameter is this about?
View 2 Replies
View Related
Mar 30, 2012
Upgraded to windows 7 ultimate 64bit from vista ultimate 64 bit. That didnt fix it. I'm desparate. I've tried everything I can find. It has a realtek 8169 nic on board sabertooth x85. I tried USB adapter and where it normally loads it just says it's installed but shows up in device manager. Like thw tealtek nic with yellow triangle on it. If I try an update driver it returns "parameter is incorrect" message. Its not connected and the is no IP using ipconfig. I Lost all my software CDs and emails with serials etc in a house fire last year.
View 6 Replies
View Related
May 23, 2012
I would like to recover my computer to its factory settings. When I try I get the same error message: 'Parameter is incorrect' How can I get past this?
View 2 Replies
View Related
Jan 10, 2012
I have Windows 7 64b with a Toshiba Portege R700. I cannot create a repair disk, I receive a parameter error. Like it doesn't recognize the CD drive. I tried un-hiding the administrator account and tried with that account but no luck either. I also tried to find the recovery folder with the cmd prompt but nada... it cannot open the boot configuration data store.
View 5 Replies
View Related
Oct 17, 2012
So I can't change the drive letter. Do I need to use Partition Magic again? The more I keep hearing/reading "do you have a backup?" - makes me believe the tool (OS) isn't capable of handling/accessing the data properly.
View 8 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
Dec 14, 2011
My sister gave me her laptop to do some repairs. I have been working on this thing for more hours than I wish to admit (mostly scans running like the Ad-Ware scan that is now on hour 7). Between her, and her 2 kids using it its has too much going on that need to be removed.The Laptop has a Vista sticker on it but was upgrade and is running 7 Home Premium. She purchased it from her neighbor who she no longer associates with. So the odds of her getting the 7 Home Premium DVD from her are slim to none.I have went through and cleaned up most of the crap and am working on getting it to run a smooth as new (or better once de-crapped). can I create a restore disc once I get it to the point I am now that will be just as good as any restore disc?
View 1 Replies
View Related
Feb 10, 2013
cannot create a recovery disc in acer apire one - following all directions. Cannot get beyond eRecovery management - cannot click on a drive for the CD rom and cannot click on start.
View 1 Replies
View Related
Nov 5, 2009
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
View 3 Replies
View Related
Oct 29, 2011
My son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
View 2 Replies
View Related
Feb 1, 2013
I bought a ASUS K45VM with win7-64bit OS 3months ago but had not create any recovery disc yet. I had since unable to create anymore recovery disc as there is a prompt message from ASUS recovery burner software that show "recovery partition does not exist".
View 1 Replies
View Related
Oct 17, 2011
Get error code 0xCOAA0301 returned from drive. Found it's a known problem so tried solutions inc Windows troubleshooter. It says fault fixed and and drive shows up in explorer and will play music cds. As soon as screen for repair disc comes up drive is shown as disconnected even though it can be heard running. Netbook tries to create disc then returns error message.
View 2 Replies
View Related
Jun 29, 2012
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies
View Related
Nov 10, 2011
I have successfully created a Windows 7 Repair Disc using the "Create a system repair disc" from Control_Panel->Backup_and_Restore
When I attempt to reboot, using the Repair Disc I have just created, everything appears to work - Loads files, Windows wavy flag, etc. however; just as I am about to get into the real stuff I receive the following message:
This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
This is exactly the ssame message I get if I boot from the original Window 7 DVD and elect Repair option
This is really important to me as when I use F8 during Post I do not have the options to repair the system here either and it freaks me a bit to be unable to repair the system should anything happen
View 2 Replies
View Related
Jul 17, 2010
I bootcamped my Macbook Pro 15" (2010) model and installed Windows 7 within a 40GB partition. Shortly after I ran out of space and needed to upgrade my partition. So I created a system repair disc and created a system image. Then I rebootcamped and installed Windows 7 on an 80GB partition. Before I reinstalled and repartitioned my hdd, I booted from my system repair disc to check for functionality. It worked fine and allowed my the option of checking or unchecking the box that reads "Format and repartition discs". Now that I've reinstalled windows 7 AND all the apple drivers using my OS X disc, when I boot from the system repair CD and follow the steps, I cannot uncheck the box asking to format all discs. I can't do this obviously because it would format the entire hdd and delete my OS X partition which has all my stuff backed up on and has all of my data.
View 2 Replies
View Related
Jan 18, 2013
The disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
View 2 Replies
View Related
