I'm using Windows 7 ultimate RTM and cannot create a repair disc image anymore. i get the error code 0x80070057 incorrect parameter with a dvd inserted. I'm really not sure what's causing this..
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
Get error code 0xCOAA0301 returned from drive. Found it's a known problem so tried solutions inc Windows troubleshooter. It says fault fixed and and drive shows up in explorer and will play music cds. As soon as screen for repair disc comes up drive is shown as disconnected even though it can be heard running. Netbook tries to create disc then returns error message.
I'm trying to 'Create a system repair disc' but keep getting this error message: System repair disc could not be created. The request is not supported (0x80070032). This is trying to use my CDRW.
If I try to use my DVDRW the error message I get is same but with a Unspecified error (0x8004005).
I've googled and tried ms support but can't find a solution. Any help would be appreciated...TIA
Microsoft Windows Repair Disc refuses to work. What should I do to allow creation of a System Repair Disc?I created (I think successfully, as the Finish window seemed normal) a System Image on a USB hard drive. The image was created overnight.After the image was created, while still inside Backup and Restore, I received the sub-window, asking if I wanted to Create a System Repair Disc. I inserted a new DVD, and clicked to start the process.The "Create a System Repair Disc" subwindow opened, to allow the drive selection.Immediately thereafter, (with the drive selection window text greyed out) before the I could even see the drive selection drop-down arrow, a failure window opened on top of it:Microsoft Windows Repair Disc has stopped working?If the debug option was chosen, the same window appeared, but without the Debug option, leaving only the Close the program option.I rebooted, and via Backup and Restore, again tried to Create a System Repair Disc. This failed the same way. I rebooted, and used another freshly unpacked DVD. The same failure occurred.Following forum post suggestions, I have subsequently successfully burned and verified a DVD on the DVD drive.I use Windows 7 Professional on an Asus U50-F.Yesterday -- maybe a coincidence -- before this failure I also installed (successfully) all of the most recent Windows Updates.
I'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
I have Windows 7 64b with a Toshiba Portege R700. I cannot create a repair disk, I receive a parameter error. Like it doesn't recognize the CD drive. I tried un-hiding the administrator account and tried with that account but no luck either. I also tried to find the recovery folder with the cmd prompt but nada... it cannot open the boot configuration data store.
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I bootcamped my Macbook Pro 15" (2010) model and installed Windows 7 within a 40GB partition. Shortly after I ran out of space and needed to upgrade my partition. So I created a system repair disc and created a system image. Then I rebootcamped and installed Windows 7 on an 80GB partition. Before I reinstalled and repartitioned my hdd, I booted from my system repair disc to check for functionality. It worked fine and allowed my the option of checking or unchecking the box that reads "Format and repartition discs". Now that I've reinstalled windows 7 AND all the apple drivers using my OS X disc, when I boot from the system repair CD and follow the steps, I cannot uncheck the box asking to format all discs. I can't do this obviously because it would format the entire hdd and delete my OS X partition which has all my stuff backed up on and has all of my data.
The disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
Got my stuff ready to reformat, only to realize I don't have a Windows 7 recovery disc.I created a System Repair Disc using Backup & Restore in control panel but I'm unsure whether this is what I need to do a complete reinstall?I wanted to follow this guide to do a complete reformat, not a recovery.
Is there any downside to creating a system repair disc (is this the same as a recovery disc?). I have a disc with the operating system that came with the computer but this wouldn't restore the computer after a crash without going through other operations such as hard disk partitioning etc.
Have a HP desktop PC that is acting flaky (a small percentage of the time it hangs), but keeps generating msgs about the HD Imminent Failure. Also has corrupted some files I had. I did run ChkDsk, and it came back with the same message, after several hours of checking. So, I have backed up everything I could, but would at least try to fix if at all possible. Guess some of the sectors are now bad. Have a single CD that came with PC (about 3 yrs old now) that is labeled "HP System Repair Disc", Windows 7, 64 Bit.Would like to at least try it.
When opened, it has the following: Files on the Disc: - Boot - Sources - Boot Mgr. To Be Written To Disc: - Desktop
Is there anything herein that might correct the bad Sectors, or any other HD problem that is software and not hardware related?
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
I'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.