HD Imminent Failure - HP System Repair Disc
May 27, 2012
Have a HP desktop PC that is acting flaky (a small percentage of the time it hangs), but keeps generating msgs about the HD Imminent Failure. Also has corrupted some files I had. I did run ChkDsk, and it came back with the same message, after several hours of checking. So, I have backed up everything I could, but would at least try to fix if at all possible. Guess some of the sectors are now bad. Have a single CD that came with PC (about 3 yrs old now) that is labeled "HP System Repair Disc", Windows 7, 64 Bit.Would like to at least try it.
When opened, it has the following:
Files on the Disc:
- Boot
- Sources
- Boot Mgr.
To Be Written To Disc:
- Desktop
Is there anything herein that might correct the bad Sectors, or any other HD problem that is software and not hardware related?
View 3 Replies
ADVERTISEMENT
Dec 22, 2011
maybe a week or two ago every time i start my computer it showed a black screen and said Hard Disk Failure iminent and have me to back back the hard disk and remove it.
Just today i start my computer and press F2 to continue the blue screen came up and now i can't go to the desktop and can't event use safe mode. I'm using another computer to open this thread.
What should I do???
View 1 Replies
View Related
Aug 29, 2012
2 days ago, my laptop stopped working and when I rebooted it, it didn't let me get into windows and took me to startup repair and after 24 hours, nothing happened, so i decided to reboot my labtop again (while it was doing startup repair still) and i used recovery cd to try to repair but it said "Imminent Hard Disk Failure" and i click continue with the startup repair, my CD work ( got into the options) and i chose startup repair and it work but after that i gave me that my Hard Disk Failer
View 8 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
Dec 17, 2011
when trying to create a system repair disc, i get the following message: system repair disc could not be created, the parameter is incorrect (Ox80070057)
View 2 Replies
View Related
Dec 31, 2011
Known good cd drive & dvd drive installed in my pc.Tried discs separately in each drive three ways.Have tried Search box typing recdisc.exe.Have tried going through Control Panel to reach the part to create repair disc.Have tried using an elevated prompt & then typing recdisc."System repair disc could not be created. The parameter is incorrect. (0x80070057)."
View 5 Replies
View Related
Jul 17, 2010
I bootcamped my Macbook Pro 15" (2010) model and installed Windows 7 within a 40GB partition. Shortly after I ran out of space and needed to upgrade my partition. So I created a system repair disc and created a system image. Then I rebootcamped and installed Windows 7 on an 80GB partition. Before I reinstalled and repartitioned my hdd, I booted from my system repair disc to check for functionality. It worked fine and allowed my the option of checking or unchecking the box that reads "Format and repartition discs". Now that I've reinstalled windows 7 AND all the apple drivers using my OS X disc, when I boot from the system repair CD and follow the steps, I cannot uncheck the box asking to format all discs. I can't do this obviously because it would format the entire hdd and delete my OS X partition which has all my stuff backed up on and has all of my data.
View 2 Replies
View Related
Aug 30, 2012
hey how do u create a system repair disc?
View 1 Replies
View Related
Jan 15, 2009
How to Create a Windows 7 System Repair Disc ?
View 0 Replies
View Related
Oct 10, 2011
Got my stuff ready to reformat, only to realize I don't have a Windows 7 recovery disc.I created a System Repair Disc using Backup & Restore in control panel but I'm unsure whether this is what I need to do a complete reinstall?I wanted to follow this guide to do a complete reformat, not a recovery.
View 2 Replies
View Related
Sep 14, 2010
Is there any downside to creating a system repair disc (is this the same as a recovery disc?). I have a disc with the operating system that came with the computer but this wouldn't restore the computer after a crash without going through other operations such as hard disk partitioning etc.
View 9 Replies
View Related
Jan 26, 2012
i have a Sony Vaio laptop with windows 7 home premium 32bits and i wanted to create a system repair disc with the windows 7 tools but this laptop has no CDDVD drive so obviously the tool gives an error asking for one to be pluged in...o the question is, is there any other way to create a system repair disc or do i need to get an external cddvd drive?EDIT: forgot to say, the point is so i can create an image of the system repair disc so i can put it on an USB drive
View 4 Replies
View Related
Jul 26, 2012
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command prompt doesn't work either.
View 9 Replies
View Related
Dec 19, 2010
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
View 8 Replies
View Related
Oct 1, 2009
I'm trying to 'Create a system repair disc' but keep getting this error message: System repair disc could not be created. The request is not supported (0x80070032). This is trying to use my CDRW.
If I try to use my DVDRW the error message I get is same but with a Unspecified error (0x8004005).
I've googled and tried ms support but can't find a solution. Any help would be appreciated...TIA
View 4 Replies
View Related
Oct 21, 2009
I'm using Windows 7 ultimate RTM and cannot create a repair disc image anymore. i get the error code 0x80070057 incorrect parameter with a dvd inserted. I'm really not sure what's causing this..
View 9 Replies
View Related
Aug 30, 2012
when I try to burn a system repair disc the program stops working
View 1 Replies
View Related
Jul 10, 2012
I'm trying to restore my Windows 7 64bit machine to its factory settings at the moment, and I've tried the following but they've all failed.1.) Boot up and hit F8, select Repair computer, but then it just boots Windows normally.2.) Create System Repair Disc, and from BIOS boot-up, choose boot from DVD-RW, but when it does that and loads Windows files, Error 0xc000000d and winload.exe missing comes up.3.) When I tried to insert the installation disc that came with my computer, it's not recognized and nothing happens (during boot from DVD-RW).*Note - Just today when I tried to do a system restore, it said that I had no previous restore points, but I just restored a week ago, so that might add some info.
View 3 Replies
View Related
Jan 3, 2010
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
View 9 Replies
View Related
Aug 20, 2012
Microsoft Windows Repair Disc refuses to work. What should I do to allow creation of a System Repair Disc?I created (I think successfully, as the Finish window seemed normal) a System Image on a USB hard drive. The image was created overnight.After the image was created, while still inside Backup and Restore, I received the sub-window, asking if I wanted to Create a System Repair Disc. I inserted a new DVD, and clicked to start the process.The "Create a System Repair Disc" subwindow opened, to allow the drive selection.Immediately thereafter, (with the drive selection window text greyed out) before the I could even see the drive selection drop-down arrow, a failure window opened on top of it:Microsoft Windows Repair Disc has stopped working?If the debug option was chosen, the same window appeared, but without the Debug option, leaving only the Close the program option.I rebooted, and via Backup and Restore, again tried to Create a System Repair Disc. This failed the same way. I rebooted, and used another freshly unpacked DVD. The same failure occurred.Following forum post suggestions, I have subsequently successfully burned and verified a DVD on the DVD drive.I use Windows 7 Professional on an Asus U50-F.Yesterday -- maybe a coincidence -- before this failure I also installed (successfully) all of the most recent Windows Updates.
View 2 Replies
View Related
Apr 22, 2012
I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies
View Related
Sep 29, 2011
When I try to turn on my comp. I get a message saying boot disc failureinsert system disc and press enter.If I switch off and try again it usually works o.k.occassionally I have to try several times. What is wrong, and how do I fix it. Also, is it on the brink of complete failure?
View 9 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Nov 4, 2009
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
View 9 Replies
View Related
Sep 18, 2011
So I had the power go off while I was running bitlocker (to go?) on my external hdd. I was not able to pause it before this happened. I was also running BL on an internal drive. Both were interrupted. I was able to resume and finish the internal drive. I was not able to resume the external. The BL application just stop responding when I try to resume/unlock the disk. It also seems I can't restart the machine normally when BL is trying to unlock the drive.
I read somewhere on the ms support site that even with power failure, resuming is possible. This might have only applied to an internal drive. I do recall seeing the pause button for the external, with a note that I needed to pause to stop in case of data corruption or something like that. Is there a way to recover my external? Do I need to let the program "not respond" for the same time or maybe longer than the time it spent encrypting it? Could I remove the drive and make it an internal?
View 7 Replies
View Related
Jul 1, 2012
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 371
Problem Signature 5: Auto Failover
Problem Signature 6: 1
Problem Signature 7: failure during setup
OS version: 6.1.7601.2.1.0.2561
Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
View 10 Replies
View Related
Jan 10, 2012
I have Windows 7 64b with a Toshiba Portege R700. I cannot create a repair disk, I receive a parameter error. Like it doesn't recognize the CD drive. I tried un-hiding the administrator account and tried with that account but no luck either. I also tried to find the recovery folder with the cmd prompt but nada... it cannot open the boot configuration data store.
View 5 Replies
View Related
Jan 6, 2013
I have 2 laptops. One, a Sony Vaio has a working Windows 7 home premium OA 64 bit. And another Toshiba Satellite that HAD Windows 7 home premium OA 64 bit. The hard drive in the Toshiba went fubar and is unrecoverable. None of the sectors are readable except the partition table and SMART says that drive failure is imminent. I installed a new blank hard drive in the toshiba.Can I use my Vaio Windows 7 to get this Toshiba Windows 7 working somehow? I created a repair disc on my Vaio but I don't know what to do next for the Toshiba. No the Toshiba does not have any backup recovery disks made from it but I can make whatever discs with my Sony Vaio. I have not done system recovery on windows since the old NT days. It looks like MS made this harder than it was. All I had to do was use my install disc.
View 4 Replies
View Related
Aug 19, 2012
I have a toshiba satellite c655 laptop with windows 7 64bit going thru some issues right now. Long story short, windows wont boot. I've tried a myriad of repair options with no success, and am now trying a burned repair disc from another windows 7 64bit computer. I boot from the disc, and everything is fine. I hit the first 'next' button. When it reaches the second menu screen that's supposed to show your OS, it just doesnt load. The cursor becomes a little blue circle that shows its loading, but never does. I left it there for at least 10 hrs to no avail.
View 9 Replies
View Related
Jan 15, 2013
I just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies
View Related
Aug 6, 2011
I started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
View 2 Replies
View Related
