I had bought new laptop. At that I have two drives and I locked one of them with the bitlocker and later on I just deleted that drive from disk management. Now I cannot create partition, I have more than 160 GB and system does not allow me to install a fresh copy and neither it allows me create a partition. What should I do?
View 3 Replies
I just formatted my C-Drive and installed a fresh copy of windows 7 ultimate on it. After restart, I got the following screen - See image attached. Now Windows can't boot at all. I tried using a system repair disk but it doesn't work. I doubt if it is a hardware problem, since I can access the boot menu and its options, but as I said, running the repair disk fails, I keep on getting that screen when it restarts.
View 4 Replies View RelatedI just reinstalled Windows 7 on a new hard drive and during the installation process, I split the disk into two equal partitions of 500gb. In 'My Computer' I can only see one partition which is the C drive but not the other partition. Looking in Disk Management, the other partition seems to be labelled as 'Unallocated'. How can I allocate this into a usable D drive? I would have expected this to happen automatically during the installation process.
View 1 Replies View RelatedMy 3TB drive is only showing up as 1.99TB... I remember, but don't quote me when I was installing this Win 7 Ultimate (GENUINE) disc to my comp, it said something like "Windows cannot use over 2TB" or something..I can go into disk partition and try to extend it but this happens.Also another thing I'm noticing is that the total (2048GB+700ish GB does not = 3000GB... It's labled on the drive itself "3000GB"..Is that just the comp. using it to know it's there? (I know that sounds idiotic.)So I'd love some help, and if need be I can format my drive in a heartbeat.So your saying I should fresh install and choose GPT format? I honestly have NO! problems doing that if it needs to be done.
View 13 Replies View RelatedI have had trouble with Windows 7 media centre and corrupt audio drivers and followed the tutorial install from my manufacturers supplied OEM disc. However, I seem to have installed the fresh install in a recovery partition and so now have 2 installs of windows 7 and am given the option of which one to use on boot up. The audio problems are not there in the second install but it is obviously in the wrong part of the drive as I now get a warning message saying that my recovery drive E is full. How do I uninstall the newly installed version from this drive and then I can go back to the original version and have another go of getting this to work properly. When I tried the install I was not permitted to install into the C Drive (OS) but I presume that this is where it should have gone.
View 6 Replies View RelatedMy son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
View 2 Replies View RelatedI brought windows 7 pc before 6 months. I did not know even abcd of computer at that time. I installed lots of software and games without having proper knowledge. Even i delete registry files thinking that, they are not useful to me. so i got serious problems on my pc. I finally format my pc a month before. As i describe earlier without having proper knowledge, just reading few post on internet i just insert my windows 7 cd, and install it like normal software without booting cd. It install smoothly without having any problems. The only thing was that, it doesn't format c drive instead it create windows.old folder. I delete it safely reading post from internet.Now the problem is for speed up my pc i decide to try xp on it. so i brought xp cd. I understand that without booting it is not installing xp on my pc. So i follow normal procedure of booting cd(Restarting pc and pressing f12). There was options like boot from hard drive, LS120, CDROM . I select cdrom. After that there was message "Verifying operating system Boot from cd/dvd. " for 2 second. After that it take me to the normal windows start up. I try these lots of time but i am unable to boot cd.I even try it with windows 7 cd but i am steel getting same message.Does this is because my first wrong formatting of pc.
View 9 Replies View RelatedI'm trying to install windows 7 64bit OEM but in the custom install options i can't format the partition i want to install to. The partitions were created under XP on a secondary drive, which will now be the primary drive, XP will be wiped later and that drive i have actually disconnected for the time being. The only options i can access are "refresh" and "load driver"
I'm not too sure whether i need an updated sata driver controller (asus M2N AM2 mobo - nforce controller) or i need to make the partition active using something like the diskpart utility.I've looked at the asus website and there are no updated sata drivers for windows 7 or even vista 64bit, only a beta raid driver.
Or is it the partitions themselves since they were created under XP (although i don't think its this)I've found some posts on here with similair sounding problems but hoping someone with a bit more knowledge can tell me which is most likely to be the cause and save me a bit of time.
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
View 6 Replies View RelatedI just tested this with Windows 7 Upgrade disk:
MS makes it clear that using Windows 7 Upgrade disk with XP requires a clean (Custom) install, which most people assume means over the same XP. This can be done, and places your files in windows.old for redistribution. This is only an option for Vista, since you can do an in-place upgrade which reinstalls your programs, files and settings.
You can also direct the clean install to another formatted partition or second primary formatted HDD which allows for a cleaner install. The problem is that you may still have XP in the first partition on the same HDD, which you probably will not want for long, and a laptop is hard to connect to a second HDD. Plus, an OS in an outer HDD partition takes a fraction longer to be read by the laser.
But there is a way to install from XP with an Upgrade disk to to a clean formatted first partition. Here is the way I did it:
Use a Partition manager like Paragon or Easeus to copy your XP partition over to a partition other than the first (or install XP to another partition) then use EasyBCD to Add it to the Boot Menu if necessary.
Now comes the hat trick: Boot into the new XP partition and use Disk Management to mark it active, then go to Control Panel>Folder options and show hidden system files. Make sure boot.ini, ntldr, and ntdetect.com are in the roots of both OS drives so you can boot back into XP later.
Now delete and format the first partition using Disk Management (or Easeus) from the XP desktop, then without rebooting install WIndows 7 to the first partition. After install, you can copy files over from XP via explorer and then hide or delete the XP partition, because you now have the best operating system ever and it's installed on formatted metal from an Upgrade disk.
Be sure to use Windows 7's great new imaging backup to image your installation after you get it like you want it, so you'll never have to reinstall again.
Am I only allowed to make one copy of my Recovery partition?I have a Dell desktop, with a built in Dell recovery partition. I have read that. "You are only allowed to make ONE copy of your Recovery partition and it must be on to ROM CDs or DVDs."I didn't know that when I made a copy of C and recovery partition to my external drive,
I am a bit concered that I can only do this once. Is that strictly true?
Here's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
can we create the logical partition after Z: drive?if yes then what we will be the name of that drive
View 2 Replies View RelatedI have acquired a kingston 64 gig ssd, which is formatted by win XP pro. When I try to install Win 7 on the ssd, it gives me an error like, "Can't find/create the partition." Set up see's the primary drive-1, but I still get the error and won't let me install the OS. I've searched the internet and can find nothing on this error exactly.
View 2 Replies View RelatedWhen I try to install Windows 7 Home Premium 32bit onto my Hard Drive it says that it can't create a partition on it, so Installation cannot continue.The hard drive was formatted and cleared and ready to go..I'm in the BIOS right now, but keep in mind that this is a Dell Dimension 4600 so the BIOS isn't all that advanced like nowaday computers.
View 6 Replies View RelatedMy driver are combined into one drive. I install my os too. I need a tool to partition that drive.
View 3 Replies View RelatedOnce you get to the Custom (Advanced) tab of Windows 7 clean install there are options to delete the partition, format, etc. Assuming I want to delete all of my partitions so that I have one large volume C: is it best to delete the partitions first and then format? Why would someone do one over the other (or both?) Right now I have a C: partition and a D:RECOVERY partition. I want to delete the D: partition and combine it to the C: partition.Don't they do the same thing? Why do you need to format after you delete a partition ? Do I also delete the C: partition and "re-create" it? What about the term "Unallocated Space"
View 9 Replies View RelatedI have a bit of a problem. I recently got a new SSD and configured it to make it my boot drive. I kept my old installation on my hdd and also made a new partition on that device to hold all of the program files, data, etc. Whenever I was finished installing all the programs that I had on my old setup on my new setup and had transfered all necessary documents, I figured it was time to remove the old partition and expand the new data partition to fill the drive. I used gparted to delete the old one and expand the new one.
For some reason, whenever I installed windows 7 on my ssd, it never created a system reserved partition. Everything booted up fine. After deleting my old partition, my system now fails to boot up and gives me the message "BootMGR is missing. Press CTRL+ALT+DEL to restart". Clearly, my computer is now wanting a system reserved partition.
My question is, how do I create a system reserved partition AFTER Windows 7 has been installed?
I have already tried startup repair and all of the bootrec.exe commands, but none of them seem to work.
basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
View 1 Replies View RelatedI have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057
View 3 Replies View Relatedi want to create another partition, which can be bootable. so that i will be able to boot from ubuntu as well as windows 7....
View 3 Replies View RelatedI am attempting to install a Windows 7 OEM x64 onto an older machine I have. MB is a Foxconn NF4UK8AA-8EKRS, CPU is AMD Athlon 64 x2, 4200+ 2.25 GHz, RAM 1GB. I installed a new OEM 500GB SATA hard drive unformatted.
Current OS is Windows XP Home SP2, I deleted SP3 since it was giving me some problems with auto login.
My DVD drive will not read the Windows 7 installation disk, similar to another post the drive just flashes, never spools up. It will read other CDs and DVDs.
I initialized the hard drive but have not partitioned or formatted the new SATA hard drive which is where I want to install the new OS. While the BIOS recognizes the drive, its not listed on Computer tree.
I have copied the Windows 7 OEM DVD contents onto a Folder that I created on a Toshiba External USB drive. Only had a 2GB USB Flash Drive so thought I would use the external drive and select the setup.exe in the Windows 7 files I copied into a folder without formatting a complete 250GB ext USB drive.
Question, can I partition and format the new SATA drive using the Windows XP Home Edition with an NTSF format and will this be recognized by Windows 7?
Question, can I install Windows 7 from the Toshiba Ext USB drive's folder onto the newly formatted SATA drive? Or does Windows 7 require a different formatting setup?
The BIOS and MB won't recognize a DVD drive it only allows a boot from CD. I removed the CD and DVD master/slave parallel cable and only installed the DVD as the master, but Windows 7 DVD just blinks and never spins the drive.
If I can get the new OS installed I'll remove my two older 40GB PATA hard drives and add more RAM. This machine is for my wife's use since it was in the garage gathering dust. Thought I would revive it and set up a wireless home group between my machine and her's. I added an all in one printer/copier/scanner in addition to the HP Photosmart D7460 I have so we can share files, printers and Internet connection.
I have been building my own machines since about 1990. Building a machine is fun (takes maybe 2hrs) but all the software kicks my butt. Also I went to the OEM System Builder License at Microsoft OEM Partner Center that is the most confusing arrangement I have ever seen. I'm just a home builder having fun, not a business, must I buy the full version to get this installed?
Got a virus in my old drive. I bought a new drive and tried to install Windows 7 on it and slave the old drive so to pull files off I wanted, and then format the drive. This did not work. All I get is the Windows blue screen with the dove on it, and no desktop.
View 3 Replies View Relatedhow to create windows image bootable partion in my hard drive
View 1 Replies View RelatedI am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
I tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
I have just bought a brand new hard drive due to my last ones controller failed.
Western Digital Caviar Black 500gb
So the problem,
Did a fresh install of win 7 (Build 7229) two nights ago, all installed perfectly, next day (yesterday) went to boot up pc and had the dos error message - Disk boot failure, please insert system disk and press enter.
My first impression was it may have been an install failure, so i formatted the hard drive and reinstalled. shutdown the PC and rebooted up and i had the same error message, now after this, i got my failed hard drive out and after a lot of faffing around, BIOS found it and it gave me the same error message.
Can anyone tell me what the problem might be. I have tried Windows startup repair, did not fix.
BIOS settings are
First boot device is Hard drive
second boot device is CD-ROM
(I have even swapped these around to boot from windows 7 and it just starts the setup procedure of installing windows drivers) I have even set boot order of HDDs so my main windows HDD is up top. Anyone got any clues.
I just built my first computer, and it has an SSD and an HDD. I installed a fresh copy of Windows 7 on the brand new SSD, and on the C Drive I'm seeing a windows.old file that is 11.5GB, and there is a windows file that is 12.3GB. I don't get this at all. Like I said, it is my first computer.....everything seemed to go well with the build, and sp far things are working, but I know this isn't right. This was a brand new drive, like I said, I do remember when it was going through the different parts of the install, and restarting several times, that it seemed like it was staarting at the beginning again.....as If when it had finished, I didn't take the DVD out, and was basically starting the install "again"....if that makes sense, I stopped it, and pulled the DVD and it booted up, and seems o.k.
View 3 Replies View Relatedi'm looking to do a fresh install of Win 7 (mostly just to reorganize my HDD setup) and here's the catch - I have a secondary drive with all my games, program files, data, etc. and I'm wondering if there's an easy way to get the new Windows install to recognize these applications without having to reinstall them all. I know I could go into the registry and change keys, but that would probably take longer than reinstalling them all.
View 4 Replies View RelatedI bought a new 2 Tb hard drive because my primary one was getting full. I would like to do a fresh install on the primary drive once I have moved over all the games, videos, pictures, etc. that I don't want to lose. I can format the primary drive and reinstall windows without affecting the content on the second drive, correct? Is there anything I need to know?
View 7 Replies View RelatedI was thinking of doing a fresh install of Windows 7 64bit Ultimate. Currently I am running the same. but wanted to do a fresh install. The problem is that My DVD drive is not working.. and I took it out. Need steps in installing windows 7 64bit Ultimate using USB pen drive. I want to wipe out the entire hard disk before doing that and want to do the fresh install. One of my friends when tried to do like this, his bootable USB pen drive was not detecting via BIOS.
View 5 Replies View Related
