Fresh Install Windows 7 In Recovery Partition?
Jul 30, 2011
I have had trouble with Windows 7 media centre and corrupt audio drivers and followed the tutorial install from my manufacturers supplied OEM disc. However, I seem to have installed the fresh install in a recovery partition and so now have 2 installs of windows 7 and am given the option of which one to use on boot up. The audio problems are not there in the second install but it is obviously in the wrong part of the drive as I now get a warning message saying that my recovery drive E is full. How do I uninstall the newly installed version from this drive and then I can go back to the original version and have another go of getting this to work properly. When I tried the install I was not permitted to install into the C Drive (OS) but I presume that this is where it should have gone.
View 6 Replies
ADVERTISEMENT
Nov 10, 2012
I just reinstalled Windows 7 on a new hard drive and during the installation process, I split the disk into two equal partitions of 500gb. In 'My Computer' I can only see one partition which is the C drive but not the other partition. Looking in Disk Management, the other partition seems to be labelled as 'Unallocated'. How can I allocate this into a usable D drive? I would have expected this to happen automatically during the installation process.
View 1 Replies
View Related
Aug 8, 2010
I had bought new laptop. At that I have two drives and I locked one of them with the bitlocker and later on I just deleted that drive from disk management. Now I cannot create partition, I have more than 160 GB and system does not allow me to install a fresh copy and neither it allows me create a partition. What should I do?
View 3 Replies
View Related
Sep 19, 2011
I want to install windows 7 ultimate x64 bit version on my Laptop. currently i have windows home basic version on my laptop with one C drive and one HP Recovery partition as a D drive. If i install ultimate, will i get recovery partition drive?
View 3 Replies
View Related
Dec 25, 2012
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies
View Related
Jun 23, 2012
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies
View Related
May 27, 2012
Upon inserting the windows installation disk into the drive, the basic windows procedures took place. It then asked where we wanted to intall the windows operating system. We decided we wanted to partition his one and only hard drive (a 1TB Seagate at 7200rpm or so). We chose a 100GB partition to be the primary drive where the operating system would be installed. Windows also created a 104mb drive for system files or some nonsense. That left a 900 GB partition that would NOT have windows 7 installed on it. Everything installed, PC booted up and when we open windows explorer, the 900 GB drive does not appear. Maybe it has not been formatted?
View 3 Replies
View Related
Jun 26, 2012
is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
View 4 Replies
View Related
Oct 3, 2012
I have partitioned my main hdd into 2, one is for system install only and the other has programs / game installations. I want to put a fresh install on my system partition but wonder how difficult it will be to use the programs from the other partition, eg. Will i have any registry problems if i try to run the programs straight away? Some of these programs are hefty in size...
View 1 Replies
View Related
Aug 30, 2010
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies
View Related
Nov 1, 2009
I'm upgrading a Compaq Presario running XP that has a recovery partition installed by the manufacturer. It's my understanding that the recovery partition will be useless after the upgrade. Should the drive be reformatted and the partition deleted?
View 7 Replies
View Related
Oct 4, 2012
Recovery Partition on Windows 7
View 4 Replies
View Related
Apr 14, 2011
I have my netbook dual-boot WinXP and Windows 7. (I used EasyBCD for the dual-boot setup.)In booting into Windows 7, I used to have the option of the "repair your computer", which brought one several useful tools, if there is problem booting.Of course, the exact same tools are on the Windows 7 setup DVD, which I have. However, with a netbook, I don't always have the USB DVD drive with me, or the DVD, and that recovery stuff boots up much faster from the HDD partition, than from the DVD. So I think it is good to have.(Not at all like the notebook manufacturers recovery partitions. I wouldn't want to use those at all, wiping out all my data.)Recently I upgraded to a larger HDD. I used Acronis to clone my old HDD (at that time in the notebook) to the new HDD (attached via USB enclosure). (It was an older Acronis version, long predating Windows 7. I don't know if I would have had better results with a new version.)Well, at first I could not boot at all, with the new HDD installed. I was able to fix that though. (I forget the details of it at the moment.)Also, my drive letters (I have four partitions-drives) were messed up, so somehow the Acronis cloning did not keep that information, and I had to fix that in both XP and 7, with Disk Management.For the most part though, my partitions were all intact in the new drive. Being a larger HDD, I increased the size of a couple, in the Acronis interface.I realize now though, that I do not have the recovery boot-up option any more. That can show up while booting into Windows 7 and pressing a key, but if one chooses it, it just tells one to put in the Windows 7 DVD. Therefore, that option of booting from the recovery partition seems to be gone.Looking in Disk Management from Win 7, I see an unallocated partition, I think about 8.98 GB, I think. Is that the Windows 7 recovery partition? Did Acronis copy it correctly, but somehow the boot sector on the new drive cannot access it?
View 9 Replies
View Related
Oct 22, 2011
I have a Dell XPS laptop. I reinstalled windows a weeks ago using an oem disc.Since then i have notice my sound sometimes stops working. I would like to reinstall to factory. I booted and pressed f8 then clicked repair windows. At the repair menu the dell factory reinstall option is missing.
View 9 Replies
View Related
Oct 29, 2011
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies
View Related
Mar 19, 2011
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies
View Related
Oct 1, 2011
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies
View Related
Mar 12, 2012
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies
View Related
Feb 17, 2013
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
View 2 Replies
View Related
Apr 30, 2011
how to create the recoverypatition at the on new installation of windows 7
View 3 Replies
View Related
Sep 4, 2011
i have lenovo g550 i have only two drives c and d. i want to partition d drive if ican i will loose my onekey recovery software. without deleting one key recovery software how can i partition my d drive?
View 2 Replies
View Related
Nov 19, 2012
So I have a machine on my hands that is suffering registry damage due to viruses that I managed to remove but I still can't get the registry repaired since the computer has no recovery partition and the original cd is gone. System restore did nothing so I'm wondering if there is a way to fix the registry with what those things missing.
View 5 Replies
View Related
Sep 13, 2012
I've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
View 2 Replies
View Related
Jan 10, 2012
I wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
View 1 Replies
View Related
Feb 18, 2012
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
View 3 Replies
View Related
Mar 19, 2012
Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
MOBO: ASRock Z68 Extreme3 Gen3 @ P1.30 (latest BIOS update)
CPU: Intel Core i5 2500 Sandy Bridge @ 3.30ghz
RAM: GSkill RIPJAWS 2x4gb DDR3 1333
GPU: MSI 560 GTX-TI Twin Frozr ii 2gb
PSU: Corsair TX750W
HDD: 1TB Samsung SATAII @ 3gb/sec
DVD-ROM: ASUS SATA DVD-ROM
OS: Windows 7 Ultimate 64bit RETAIL
View 8 Replies
View Related
Nov 25, 2012
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all..
Ive also tried to change my PSU to a different brand, but all volts seems ok.
I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
View 1 Replies
View Related
Nov 14, 2010
They used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
View 6 Replies
View Related
Mar 16, 2011
I'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
View 7 Replies
View Related
May 2, 2011
A few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
View 9 Replies
View Related
Apr 3, 2012
I installed Windows 7 Home Premium over Vista Business on a PC to see if it would run and tested it out for a few days. I used my installation CD that was good for only one PC. So to activate Win 7 on that 2nd PC I need to buy another copy of the OS. Can I just reinstall over the current version of Windows 7, or so I need to wipe the drive and install fresh?
View 9 Replies
View Related
