I have a Dell XPS laptop. I reinstalled windows a weeks ago using an oem disc.Since then i have notice my sound sometimes stops working. I would like to reinstall to factory. I booted and pressed f8 then clicked repair windows. At the repair menu the dell factory reinstall option is missing.
View 9 Replies
I have a Sony Vaio VPCEC4SOE I bought cheap - needs a new screen.After purchasing first thing I done was a Reinstall of windows using F10 on boot up and following instructions.However after all finished Task manager showed 90+ processes at idle and the amount of bloatware was more than I had ever seen included with any PC.So, Made up a Windows 7 Install disc as I wanted to go for a totally fresh install. Once installed it asked for product key - I checked underneath and half of the sticker is missing (I know I should have checked before hand!) Plus thinking about it after I really don't think the product key can be reused even if it is on the same machine (can someone confirm?)I now have a nice clean operating system, but no product key, that will self destruct in 27 days! So I would like to return to VAIO factory state. I have checked and recovery partition is still there and intact - 13gb, but how can I reinstall from this partition? F10 now does nowt on boot up.
View 9 Replies View RelatedI have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies View RelatedI've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies View Relatedis not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
View 4 Replies View RelatedI have just bought HP pavilion G6 notebook. It came with pre-installed Genuine Windows 7 Home Premium 64bit, recovery disk of 14 gb and C: Hard drive of 451 gb.
I have made 3 recovery disks(DVDS) using "Recovery Media creation". I Want to Reinstall Windows 7 because 1)want to get rid of recovery disk of 14gb. 2)want to do partition because without partition my system is really slow.
I want to reinstall Windows 7 using these 3 DVDs.
I'm looking to reinstall Windows 7 64 on my Gateway computer. I go into the advanced recovery options and tell it to reinstall to original factory. Everything is going well and the computer restarts to begin the process ... I choose my keyboard type at the prompt ... but then, I get this message in a dialogue box:
"Please complete operating system setup process before doing system recovery".
I have no idea what that means or what it is asking me to do. I've googled everywhere and can't find any info on it.
FORMATING my C drive and how to reinstall windows 7 again with the help of recovery disc.
my computer was formated and windows were reinstalled but it was not done by me. I have the recovery discs provided by the hp laptop company.
i have windows 7 home premium 64 bit.My device is HP DV6 6121tx
but i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies View RelatedI have been running Win 7 and XP Pro in dual boot per Method Two of this tutorial, without any problems.When I tried to install SP1 of Win 7, it crashed and went back to the previous Restore Point which isworking OK for now. BUT--Windows Installer is now broken so I can't install anything from Windows Update,including taking another crack at SP1. Can I clean-reinstall Win 7 on its partition without hosing down XP?After the install I plan to run EasyBCD to re-connect XP to the initial boot menu. Does EasyBCD handle the writing of NST tldr and boot.ini to the right spots? Or do I have to save them somewhere?
View 2 Replies View RelatedMy specs:
ASUS M5A97 (AM3+) Mobo
AMD Phenom II X4 945
2 x 4GB G-Skill Ripjaw DDR3 RAM
PNY Nvidia GeForce 460 GTX 1GB
A 1TB SATA HDD (can't remember the brand)
A 160GB SATA HDD
My issue is, I'll try to boot into Windows 7 Ultimate x64, not a new installation at all, and I get the "Windows is Starting" screen and the little colored balls, but after a few seconds I get a very very quick blue screen and reboot before Windows even loads. There's no way I can read the blue screen error.So I thought, "Let's just do a startup repair." That didn't work; it said: Quote: Root cause found:The partition table does not have a valid System Partition
Repair action: Partition table repair
Result: Completed successfully. Error code = 0x0
Time taken = 20632ms
So I pop in the Windows 7 installation DVD; it tells me there are missing CD/DVD drivers. I point it to the Windows 7 drivers directory on my primary HDD, it still can't find anything.So I load up my copy of MSDaRT. Some tools load, but it tells me "Tool requires a supported offline OS" under many of the tools, and the ones that do start won't do anything at all because they can't "see" my Windows 7 installation. I have an external HDD reader, but I'd rather not have to wipe everything and do a clean reinstall. Maybe trying to fix the partitions with a G-Parted on an Ubuntu Live CD or something?
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition?
- And during the reinstall could I do so that this partition is not created anymore?
I have an HP G61 which was purchased from Pc World and having had 2 new hard drives with the later having software installed and now been given Recovery Disks.I want to remove/wipe everything on the hard drive and then use the HP G61 Recovery Disks to install the HP factory stuff and I presume Windows 7.I have read a thread which states you need to alter BIOS, I cant even find this on my PC.Then I want to install Windows Word & Excel etc, can anyone advise how I can install with no cost, hopefully downloadable.
View 2 Replies View RelatedI'm upgrading a Compaq Presario running XP that has a recovery partition installed by the manufacturer. It's my understanding that the recovery partition will be useless after the upgrade. Should the drive be reformatted and the partition deleted?
View 7 Replies View RelatedRecovery Partition on Windows 7
View 4 Replies View RelatedI have my netbook dual-boot WinXP and Windows 7. (I used EasyBCD for the dual-boot setup.)In booting into Windows 7, I used to have the option of the "repair your computer", which brought one several useful tools, if there is problem booting.Of course, the exact same tools are on the Windows 7 setup DVD, which I have. However, with a netbook, I don't always have the USB DVD drive with me, or the DVD, and that recovery stuff boots up much faster from the HDD partition, than from the DVD. So I think it is good to have.(Not at all like the notebook manufacturers recovery partitions. I wouldn't want to use those at all, wiping out all my data.)Recently I upgraded to a larger HDD. I used Acronis to clone my old HDD (at that time in the notebook) to the new HDD (attached via USB enclosure). (It was an older Acronis version, long predating Windows 7. I don't know if I would have had better results with a new version.)Well, at first I could not boot at all, with the new HDD installed. I was able to fix that though. (I forget the details of it at the moment.)Also, my drive letters (I have four partitions-drives) were messed up, so somehow the Acronis cloning did not keep that information, and I had to fix that in both XP and 7, with Disk Management.For the most part though, my partitions were all intact in the new drive. Being a larger HDD, I increased the size of a couple, in the Acronis interface.I realize now though, that I do not have the recovery boot-up option any more. That can show up while booting into Windows 7 and pressing a key, but if one chooses it, it just tells one to put in the Windows 7 DVD. Therefore, that option of booting from the recovery partition seems to be gone.Looking in Disk Management from Win 7, I see an unallocated partition, I think about 8.98 GB, I think. Is that the Windows 7 recovery partition? Did Acronis copy it correctly, but somehow the boot sector on the new drive cannot access it?
View 9 Replies View RelatedI recently purchased a new Alienware m14x r2 which came with windows 8 single language, English pre installed. However I want to replace the hdd with a newer hybrid drive, can I create a recovery disk and reinstall the os on the new hdd? I have created 5 recovery DVDs.
View 4 Replies View Relatedhow to create the recoverypatition at the on new installation of windows 7
View 3 Replies View RelatedI have had trouble with Windows 7 media centre and corrupt audio drivers and followed the tutorial install from my manufacturers supplied OEM disc. However, I seem to have installed the fresh install in a recovery partition and so now have 2 installs of windows 7 and am given the option of which one to use on boot up. The audio problems are not there in the second install but it is obviously in the wrong part of the drive as I now get a warning message saying that my recovery drive E is full. How do I uninstall the newly installed version from this drive and then I can go back to the original version and have another go of getting this to work properly. When I tried the install I was not permitted to install into the C Drive (OS) but I presume that this is where it should have gone.
View 6 Replies View RelatedI want to install windows 7 ultimate x64 bit version on my Laptop. currently i have windows home basic version on my laptop with one C drive and one HP Recovery partition as a D drive. If i install ultimate, will i get recovery partition drive?
View 3 Replies View Relatedi have lenovo g550 i have only two drives c and d. i want to partition d drive if ican i will loose my onekey recovery software. without deleting one key recovery software how can i partition my d drive?
View 2 Replies View RelatedSo I have a machine on my hands that is suffering registry damage due to viruses that I managed to remove but I still can't get the registry repaired since the computer has no recovery partition and the original cd is gone. System restore did nothing so I'm wondering if there is a way to fix the registry with what those things missing.
View 5 Replies View RelatedI just got a new MB/CPU and want to do a clean install of my OS. Currently I have two partitions on my HD, one for the OS and one for all my data. Can I just format the OS partition and do a clean install on that partition of the new OS? I just don't want to lose all my data files. I have most backed up, but would take the entire day to backup the rest probably.
View 2 Replies View RelatedI just partitioned my C drive and now have an I: drive that I use for data, music and movies and such. My question is this: if I have to do a system recovery. Will I lose that partition? Or will Windows 7 re-install on the C: drive without touching that partition?
View 6 Replies View RelatedI installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?
View 7 Replies View RelatedI have a Toshiba L645 which is on win7 but i'd like to downgrade to XP. The laptop has a hidden recovery partition which I would like to keep intact to restore at a future date.How can I downgrade to XP and not delete the recovery partition as it is on same HDD but hidden partition.
View 7 Replies View RelatedI'm thinking of installing the RC of Windows 7 when it is released tomorrow. But there is one thing that is worrying me. When I go to install 7, i have read that it creates a 200mb partition. On my Acer laptop, there are already 4 paritions, a 9.76GB which does not show up as a drive, a 69.77GB which is labeled as 'ACER', a 66.27GB which is labeled 'DATA' and then a 3.24GB partition which again does not show up as a drive.I know that there is a recovery partition built in, will this 200mb parition affect them? I will be installing (using the upgrade) on to 69.77 Partition, or will it just spilt the 69.77 partition into two?
View 7 Replies View RelatedNo install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
View 5 Replies View RelatedI was trying to restore my Toshiba Sattelite L645-S4056 to factory default and reinstall windows 7 by inbuilt recovery system. While i was formatting the computer swtiched off itself. Then i couldnot access inbuilt recovery during booting. The computer wont boot with any windwos cd. It said something like "Cannot boot.Enter a bootable disc". I then installed a linux distero by booting with a USB device.The linux system works fine but i need windows 7. It shows that my hardisk is totally empty. There is no reserved part previously occupied by recovery system.I didn't get a recovery disc with my laptop. Any other dvd wont boot. How can i install back my Windows 7? What is wrong with the system? Is there any way to get windows 7 back?
View 3 Replies View RelatedThe hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
View 4 Replies View RelatedMy daughter has a Dell XPS with Windows 7 on it. It was having alot of issues so short verision after several house with Dell support they told me I would have to tell the computer to go back to the factory version. I followed the steps told to me and now nothing works. When I turn the computer on I do get the Windows word to start then a flash of something that could be an error message of some sort but its not there long enough for me to be sure. I then get something about I need to run a repair, which I do but the repair doesnt work. I tried putting the original install disk in the same thing happens. I have been told to try getting the recovery partition to open but I dont know how. Does this sound right? If so how do I do that and if not what should I do.
View 1 Replies View Related
