Windows 7 Reinstall - Complete OS Setup Process Before Doing Recovery
Mar 23, 2011
I'm looking to reinstall Windows 7 64 on my Gateway computer. I go into the advanced recovery options and tell it to reinstall to original factory. Everything is going well and the computer restarts to begin the process ... I choose my keyboard type at the prompt ... but then, I get this message in a dialogue box:
"Please complete operating system setup process before doing system recovery".
I have no idea what that means or what it is asking me to do. I've googled everywhere and can't find any info on it.
View 9 Replies
ADVERTISEMENT
Nov 7, 2012
my acer aspire one cannot come out from system recovery and complete the process... there is a messages pop-out that is "windows could not complete the installation.to install windows in this computer,restart the installation" so i hit enterok... then the same problem still popout... and remain in that state over and over again..i try(F2 then F8) Advance Boot option to start my computer normally hoping that the installation to stop and start as previously.. but all the option that i try still continue the installation... what should i do??
CPU TYPE : INTEL(R) Atom(tm) CPU N570 @1.66GHZ
View 3 Replies
View Related
Sep 19, 2011
Windows 7 has suddenly started freezing in the boot-up process. The system hangs when it comes to starting two weather-related services - didn't used to be that way. When the weather services don't load, nothing else - IE, MS Outlook - can be started - they hang as well.
View 1 Replies
View Related
Feb 9, 2011
Problem 1 Anytime I recieve an update or download that comes from online in get an error message and the program will not complete the download process. The error message I get has the pharse that always says %localappdata% usally thier might be something else with this usally refering to what download or update it is. Some times when the retry come up if I unplug the internet connection it will go through. I do have a Wii hooked up wirelessly through the AOL modem. Help
Problem 2 I have 2 printers. The main printer is a HP laserjet 1200 seriers B/W. The second printer is an HP Photosmart4680 which I use for printing pictures. I am having a problem with the Laserjet 1200. Everytime you send something to the printer it will not print. If you open up the printer menu it will say to clear the cue. If you ask the troubleshooter program to fix it it says it has. but you still can not get it ot print anything except a self test/configurations. on that sheet I do not see an error being shown once the cue has been cleared. I can shift anything over to the photosmart [printer and that is printing fine.
View 1 Replies
View Related
Sep 29, 2012
Apps were not responding and computer is hanging up... Now computer will now complete startup process (even in safe modes). Windows and norton antivirus suspect Oem-drv86.exe is a threat, but, neither offer a fix.
View 1 Replies
View Related
Oct 31, 2012
wipe my hard drive clean of everything (including my current installation of windows 7)I currently have a dell inspiron 1545 running windows 7. I bought it new and I think with Windows pre-installed. That hard drive crashed, so I got a replacement one and that one did not come with any CDs or DVDs.First question:I've read that nowadays that most manufacturers don't ship disc's, but rather deposit recovery partition on the hard drive.If I create a DVD with this recovery partition will it be exactly the same as if I buy a new windows installation disc?
View 3 Replies
View Related
Jun 16, 2011
I am having all kinds of issues with IE9. Websites wont open, or sites with ID and passwords wont open. The down loader for Technet wont install. Just many issues.Is there a way to complete remove IE9 so there is nothing Windows can store for reinstall, so I can then reinstall IE9 to see if that fixes my issues?
View 2 Replies
View Related
Nov 28, 2012
i was having problems with my pc and did a complete reinstall windows 7 after install up dates take place after install restart pc freezes to get going again i have to restore and loose all my updates does that sound as if this question is from a pc expert.
View 1 Replies
View Related
Jul 9, 2012
I am trying to install my windows 7 and it wont complete the setup. After all the files load from my original disks, the computer restarts and starts the setup but its been a blank screen for over 2 hours now and still nothing. I can use the restore from an image file and it sets up in 30 minutes and works but i have no home group setup and cant read some external hard drives right so I wanted to try a clean install. The computer is a Gateway 64 bit.
View 7 Replies
View Related
Mar 21, 2011
Homebuilt PC, all appears fine but when trying to install/setup Windows XP Mode, the green progess bar gets approximately 98% complete then goes red and a message "Cannot Complete Setup Please Try Again" appears. I have tried four or five times now and same thing every time.
My system:
OS Windows 7 Pro 64 bit
CPU Intel Q9550
Motherboard Nforce 750i SLI
Memory 6 GB RAM
Graphics Card Nvidia 9500GT
Sound Card Creative Sound Blaster X-Fi
Screen Resolution 1920 X 1080
View 6 Replies
View Related
Jun 9, 2011
i know theres another thread but instead of Hijacking his (i hate getting hijacked..) i'll start a new one,no wi tried the solution si've seen, chang emy username in Windows 7, defrag hard drive, download w/ IE, Firefox, Chrome, try another PC.. nada.its annoying because want to use it for Rosetta Stone: Japanese. and only issue running it in Windows 7 as is? as is it Will Not Find language CDs yet it will in XP.
[code]....
View 6 Replies
View Related
Feb 3, 2013
I got some bad malware and removed it with a complete re-install of windows 7. I deleted all partitions and re-installed Windows 7 from that point. I went to the Gateway website and got all of the drivers for the equipment on the computer and it still runs painfully slow. I've run CCcleaner several times, done DSKCHK (because I suspected my hard drive might be faulty) and everything says I have no problems.
MiniToolBox by Farbar Version:10-01-2013
Ran by gianacakos (administrator) on 03-02-2013 at 08:54:31
Running from "C:\Users\gianacakos\Downloads"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
View 7 Replies
View Related
Feb 18, 2010
- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
View 5 Replies
View Related
Dec 26, 2011
I recently set up a new computer, and managed to get a copy of Win 7 Ultimate. However, I get an ambiguous error when I attempt to set up the Windows XP Mode. I'm able to boot a virtual machine, and my CPU's VM options are turned on.
View 9 Replies
View Related
Feb 5, 2013
When I turned on my laptop, I was prompted to start windows normally, so I did. Then, it came up with an error message that read: "windows didn't start correctly" so I pressed okay and it came up with the start windows normally again and now I get a message to restore my computer, so I did and now it gives a message that says: Windows could not complete setup what do I need to do to get it back up and working correctly?
View 1 Replies
View Related
Jul 19, 2012
Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
View 1 Replies
View Related
Nov 1, 2009
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
View 11 Replies
View Related
Apr 13, 2011
when i press alt+F10 to go to the acer eRecovery management program to do so, i cannot select any options except for the exit option ,One option says "Completely restore system to factory defaults and the other says "Restore Operating system and retain user data".
View 4 Replies
View Related
Apr 24, 2012
I'm running Acer eRecovery v7.7.8 with recovery disks. Having run smoothly, it has been on 98% for about half an hour. Is there something wrong or is it at some naturally slow part of the recovery process?
View 9 Replies
View Related
Apr 22, 2012
whenever I try to install a game or program (happens more often for games), the setup process freezes at random intervals. Not the kind of freeze where it crashes or gets the 'not responding' error message, but I can't click anything or advance to the next part of the setup until it goes away. It's really strange, and only started happening two weeks ago. I'm running Ultimate 32-bit.
View 7 Replies
View Related
Aug 10, 2012
I was trying to reinstall windows 7 and my computer froze. Now there is an error saying that the setup will resume after I restart, however when I do the same message pops up.
View 1 Replies
View Related
Oct 22, 2011
I have a Dell XPS laptop. I reinstalled windows a weeks ago using an oem disc.Since then i have notice my sound sometimes stops working. I would like to reinstall to factory. I booted and pressed f8 then clicked repair windows. At the repair menu the dell factory reinstall option is missing.
View 9 Replies
View Related
Mar 4, 2010
i am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
View 2 Replies
View Related
Oct 15, 2011
I have just bought HP pavilion G6 notebook. It came with pre-installed Genuine Windows 7 Home Premium 64bit, recovery disk of 14 gb and C: Hard drive of 451 gb.
I have made 3 recovery disks(DVDS) using "Recovery Media creation". I Want to Reinstall Windows 7 because 1)want to get rid of recovery disk of 14gb. 2)want to do partition because without partition my system is really slow.
I want to reinstall Windows 7 using these 3 DVDs.
View 5 Replies
View Related
Jun 15, 2012
I tried to break the disk on several parts with Partition Manager, but at the middle of the process it froze and I forced the computer to restart. After resetting it says to "Insert the Recover Disk or other Recovery Media". After it I put the disc with the Windows 7 and at the menu where you have to choose to move (by keyboard arrows) to installation, the keyboard does not work, so I can't move to the installation and it jumps directly to the Local Disc. I also tried Windows XP disc and the same problem - there is no chance to reinstall the system. The keyboard is working in the BIOS, but after does not work.
View 5 Replies
View Related
Oct 3, 2012
FORMATING my C drive and how to reinstall windows 7 again with the help of recovery disc.
my computer was formated and windows were reinstalled but it was not done by me. I have the recovery discs provided by the hp laptop company.
i have windows 7 home premium 64 bit.My device is HP DV6 6121tx
View 4 Replies
View Related
Jul 16, 2011
Just received my new Dell Inspiron 620 yesterday and am working thru setup options. One of the first things on my list is making sure I have the appropriate repair/recovery prep in hand for the inevitable All that came with the pc was a Drivers and Utilities cd.So far, I have created a Repair Disk...do I also want/need to create a System Image?I've only created the Administrator acct at this point, but will need to create at least one User acct for lovely wife (and it seems I should also be creating one for myself as well, and not using the Admin acct, from some things I've read).
View 3 Replies
View Related
Nov 1, 2012
I have a Sony Vaio VPCEC4SOE I bought cheap - needs a new screen.After purchasing first thing I done was a Reinstall of windows using F10 on boot up and following instructions.However after all finished Task manager showed 90+ processes at idle and the amount of bloatware was more than I had ever seen included with any PC.So, Made up a Windows 7 Install disc as I wanted to go for a totally fresh install. Once installed it asked for product key - I checked underneath and half of the sticker is missing (I know I should have checked before hand!) Plus thinking about it after I really don't think the product key can be reused even if it is on the same machine (can someone confirm?)I now have a nice clean operating system, but no product key, that will self destruct in 27 days! So I would like to return to VAIO factory state. I have checked and recovery partition is still there and intact - 13gb, but how can I reinstall from this partition? F10 now does nowt on boot up.
View 9 Replies
View Related
Sep 22, 2011
I have an HP G61 which was purchased from Pc World and having had 2 new hard drives with the later having software installed and now been given Recovery Disks.I want to remove/wipe everything on the hard drive and then use the HP G61 Recovery Disks to install the HP factory stuff and I presume Windows 7.I have read a thread which states you need to alter BIOS, I cant even find this on my PC.Then I want to install Windows Word & Excel etc, can anyone advise how I can install with no cost, hopefully downloadable.
View 2 Replies
View Related
Apr 8, 2012
I have a new Dell Inspiron 620MT with Windows 7 and have just run the Setup procedures. This included the creation of 3 DVD's for Recovery Disks. My hard drive has 33 GB of content as delivered, including Microsoft Office Home and Business and several "freebies" Dell includes. The setup told me my 3 DVD's include 10.88GB, I "think" but am not sure Setup told me it was using compression to load the DVD's. What is the content of these 3 DVD's? I've called Dell multiple times and get conflicting, contradictory and changing answers to my question? I am wondering if it is ONLY Windows 7 or is it some partial or complete set of everything on my hard drive? Unrelated, Dell support sent me a flash drive of Windows 7 restore software that is "bootable." I looked at it and it contains only 4GB. That is why I am thinking there may be more content on the 3 DVD's 10.88 GB. I simply want to know what I have as a base in the way of backup BEFORE I migrate everything from my 7 year very old Dell Dimension 3000.
View 14 Replies
View Related
Aug 5, 2012
It is running Windows 7 Home Premium 64 bit application. June 2012 it crashed. Since I am a teacher, I needed my laptop to recover quickly. The system would not recognize my recovery disks so I had to order disks from HP. The disks arrived but when I began to rebuild the tablet I killed the process at 12 hours because it seemed ridiculously long. ( My prior career I was a system project manager...so I am no strager to computers and software installations.) My quick solution was installing Windows 7 Home premium and then downloading the custom installtions for my HP tablet off the HP site. This was required to finish the school year. July 2012 I began attempting to rebuild my laptop correctly. I found, through HP forums, their installtions take 16 hours before you get to the windows setup screens. In the midst of this process my battery also seems to have completely died.I have tested that it is the battery: AC Power glows steady white when battery is removed and system boots.
Put the battery back in and the light blinks orange the whole time. Battery test shows it cannot recognize a battery. So....when I tried to install the first time with battery still in, 16 hours later HP recovey processed, and Windows setup began. It made it through preparing software installation, installing software, customizing software, and stopped at "Checking AC Power." The second time.....I tried to install I removed the dead battery.This allowed the power led to stop blinking orange and be steady white glow. For this test the system made it through preparing, and installing, but hung at customizing software.Third try now....battery back in hangs again at Checking AC Power. It has been here for 8 hours. The HP site also indicates that the WIFI radio needs to be on for installation. Mine is and glows white.
Any remedies for how to complete the installation, through checking ac power where it is hanging, and then initate and complete the installtion verification would be great! While I can install my full clean version of Windows 7, it would be preferential to install with the HP customizations specific to this laptop.Here is a link to the customer forum for the inordiantely long recovery process on the HP side: Installing from HP Recovery CD,nstallation freezes at %12 - Page 11 - HP Support Forum
View 5 Replies
View Related
