I was trying to reinstall windows 7 and my computer froze. Now there is an error saying that the setup will resume after I restart, however when I do the same message pops up.
View 1 RepliesAfter my computer froze during the reinstallation I get a message telling me to restart my computer to allow the installation to finish, however it never does.
View 8 Replies View Relatedwhen i switch on my pc A window comes and shows f1 to resume .why is my pc showing that
View 1 Replies View RelatedMy hp laptop froze while i was performing system recovery. I got as far as backing up my existing files...8 dvd's worth. I restarted a few times and then froze on a grey screen with my cursor flashing in the upper left hand corner...I tried using my system recovery dvd that I made but still nothing.
View 3 Replies View RelatedToday, I was browsing the internet, while watching a stream of MLG. While suddenly my comp screen shows weird glitchy lines and the sound freezes, i end up turning off my computer and restarting it, but the glitchy screen still shows and wont startup to login screen. I was able to startup into safe mode (still with the weird glitch on screen) but the restoring and doing startup repair seems to not have fixed the problem.
View 14 Replies View RelatedI'm looking to reinstall Windows 7 64 on my Gateway computer. I go into the advanced recovery options and tell it to reinstall to original factory. Everything is going well and the computer restarts to begin the process ... I choose my keyboard type at the prompt ... but then, I get this message in a dialogue box:
"Please complete operating system setup process before doing system recovery".
I have no idea what that means or what it is asking me to do. I've googled everywhere and can't find any info on it.
On a brand new, freshly installed Windows 7 Ultimate 64. I get the following error when resuming from Hibernate: "Your computer can't come out of hibernation. Status 0xc000009a". No other info, no reference to any file such as hyberfil.sys. I have tried to "powercfg -h on/off", reboot defrag and reactivate hibernation, however the problem is still there.....what can I try?
View 9 Replies View RelatedI woke up this morning to find my computer was frozen. So I forced it to restart by holding down the power button. Once it was booting back up I walked away from my pc for an hour and when I came back it just has a message saying "Cleaning up... Do not turn off your computer." It has been like this for over 4 hours.What causes my pc to go through this cleaning up phase and how long does it take?Also is it safe to restart my pc at any point if this takes way to long?
View 9 Replies View RelatedWill the computer automatically resume from sleep when Run backup on a schedule is set at a time when the computer is sleeping or do we have to tweak the task scheduler?
View 1 Replies View RelatedMy mates Maxtor 60GB HDD is showing an Error Code of:"0200 Failure Fixed Disk 0" press F1 to Resume press F2 to enter setup.
View 2 Replies View RelatedI'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).
Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.
The only solution is to shut down the system manually and boot it up again.
I'm unable to run windows normally thanks to the "BOOTMGR is missing" error.When I try to reinstall Windows 7, it hangs on the "Setup is starting..." screen.When I open the cmd.exe using SHIFT+F10, I am able to access all of my drives, except for the D: drive. When I attempt to execute any command on that drive, it does absolutely nothing except give me a blinking cursor on the next line. I've let it sit there for about an hour, and still nothing, along with the "Setup is starting..." screen.Even if I could get past the BOOTMGR screen, I would be stopped by a blue screen that says: UNMOUNTABLE_BOOT_VOLUME.
View 6 Replies View RelatedDuring a full system restore of my computer i didn't realize it was not charging and left it to finish the restore. Shortly coming back later, it had died so i rebooted it. During the reboot, it did its normal process well restoring," Setup is starting services.", but then during the process when gathering windows data to restore the computer in its final stages, it gives me the message" Windows could not finish configuring the system. To attempt to resume configuration, restart the computer." Shortly after starting my computer, going through the same process, it gives me that message again, and then it repeats, and eventually of course, goes into a circle of completing the same issue.
View 2 Replies View RelatedWindows 7 started and once it loaded the desktop it glitched up kind of like the rrod does with the 360 all the programs on my desktop had lil. glitched box's surrounding them and it froze up did it 2 times after rebooting then i booted into safe mode and it booted fine i moved a program that booted with Windows 7 while in safe mode to the desktop so it wouldnt boot with Windows 7 and i don't think that had nothing to do it but it started normal after being in safe mode.
View 7 Replies View RelatedI have a dead laptop with windows 7 installed, can I install it on another computer with the same serial? If not how do I do it without having to buy a new copy of windows 7!
View 4 Replies View Relatedi am on my iphone so u got a problem with my vaio i never recieved a Windows 7 cd so i have to reinstall it via f10 but if i press this my laptop checks if theres something wich destroid my laptop so it checks after this it says please restart your pc/laptop so i do this and i get into the same problem loop everytime i start up my laptop it says loading data and then this comes up :x any one git a idea how to fix that?
View 4 Replies View RelatedIs there a way that I can reinstall windows 7 onto my computer to hopefully make it work again? I didnt receive a disc or anything like that so im a bit confused on what to do! since the explorer.exe app error is still there, I guess its my one way to get it back!
View 1 Replies View RelatedAfter about 12 months of using my hand-built computer, it is becoming slow. I want to wipe my hard-drive and start out fresh. My question is is will i be able to reinstall Windows 7 OEM into the same computer, same parts. Will i need to activate it by phone support?
View 4 Replies View RelatedRan Windows Update on wife's computer today (Biostar A75-MH mobo, AMD A8-3850, 8Gb DDR3-1600, 64Gb Samsung 830 SSD boot drive, Win7 x64) and upon restart it froze at 35% installing the updates. After it did nothing for 30 min I rebooted. It boots to the desktop but with an error box saying failed to load sortbls.nlp. Explorer isn't working, can run any programs, Start menu won't come up, just sits with the blue circle spinning. Tried to run system restore but the 11-15 one disappeared from the list when I tried to run it and now just shows the only restore point as Windows Update Critical Update from today which fails. Startup Repair says no problems.
View 3 Replies View RelatedI recently tried to install windows 8 on my windows 7 PC and the installation froze at 80%. Upon restart my computer could no longer boot into windows and therefore i had no choice but to wipe it. I ordered a windows 8 backup dvd and booting from this can get me no further then the windows logo and "juggling balls" loading screen before the screen goes black (backlight still on) the Toshiba recovery doesn't work either, asking me what language I want to proceed in and then also black screening me. How can i install windows and get it running again?
P.S. when i turn it on with no disk in it says "please insert bootable media" etc.
I've decided that I would like to reinstall Windows 7 on my computer. I have a Toshiba Satellite laptop, and I am currently running Windows Home Premium, 64 bit, which came with the computer, already installed when I bought it.However, since my computer came with Windows already installed, it did not come with an Windows 7 installation disk. Is there any way around this? Can I download an .iso for the CD somewhere or something?
View 7 Replies View RelatedIs there any way to setup a computer on vmware and then make an image of the vm and put it on a physical computer (multiple computers if possible)?
View 5 Replies View RelatedOn this recent windows update, 2/14/13, my computer froze on the "Preparing to configure windows" screen for several hours. I rebooted normally and the screen went to "configuring updates" and stuck at 67% for about an hour. I got frustrated with it and rebooted to safe mode to see if I could do a system restore and when I did it said there was no restore point back up! So I rebooted normally and now it is still just sitting on the "Preparing to Configure Windows" screen with the circle spinning. I am using Windows 7 Ultimate on a Dell Dimension 2400.
View 1 Replies View RelatedI have a Gateway laptop that needs to be reinstalled with Win 7. Its an I3 core 64-bit computer and for some reason every time I want to boot off optical drive it wont take me to the installation process...
View 1 Replies View RelatedReinstall cd and dvd devices on windows 7 home computer
View 1 Replies View RelatedI purchased a retail copy of Windows 7 Upgrade and installed it about a year ago. It detected my Vista installation but I reformatted and did a clean install. It activated no problem.I now want to wipe my Hard drive and start fresh...but I have an important question.Will my upgrade license key allow me to reinstall Windows 7 without putting Vista back on the computer first? I want to do a clean install. I understand that Upgrade keys need to "see" a previous Windows version in the setup program before you re-format the drive.But, this is the second install of Win7; wouldn't the setup detect that I have an installed copy of Windows 7 before I format?
View 1 Replies View RelatedI got some bad malware and removed it with a complete re-install of windows 7. I deleted all partitions and re-installed Windows 7 from that point. I went to the Gateway website and got all of the drivers for the equipment on the computer and it still runs painfully slow. I've run CCcleaner several times, done DSKCHK (because I suspected my hard drive might be faulty) and everything says I have no problems.
MiniToolBox by Farbar Version:10-01-2013
Ran by gianacakos (administrator) on 03-02-2013 at 08:54:31
Running from "C:\Users\gianacakos\Downloads"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
Do I really need to uninstall and reinstall windows on my computer to get rid of spyware and malware?
View 3 Replies View Relatedi installed 95 updates and let my pc shutdown i left it for 20 mins then restarted it configured the updates then was going in the welcome screen but froze with a white cursor i had to restart my pc and everything is ok now why did this happen
View 2 Replies View RelatedI am attempting to install a fresh copy of Windows 7 on my laptop and am having multiple problems.The HDD is formatted completely empty.
1. When attempting to use the Reinstallation DVD from Dell, the DVD boots and the progress bar moves that says "Windows is loading files," then the computer restarts and it is stuck in an infinite loop.
2. When attempting to use a copy of Windows 7 on a USB drive, the drive boots up until you see the cursor to begin the reinstallation process, then the computer restarts and it is stuck in an infinite loop.
3. When attempting to use a Windows XP DVD, it starts the setup process, and then I get error: STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
I have been able to boot command line Linux distros (haven't tried any graphical distros) without any problems. Dell instructed me to run diagnostics on everything, and everything passed, so it doesn't seem like there are any apparent hardware issues. I tried pulling the battery and just using the power cord and also removing one of the sticks of RAM and attempting installation, but I have the same problems.
Specs:
Dell Inspiron 1545 (Late 2010)
Windows 7 Home Premium
Intel Core 2 Duo
320GB HDD
4GB RAM
My computer won't startup in normal or safe mode and I was told my windows 7 may be corrupt. I am trying to reinstall it, but I'm not sure how. I place the disc in the drive and rebooted the computer but it didn't work. The system repairs won't work, nor will system restore. Is there a command prompt or anything?
Desktop
Ibuypower WA 910i
64-bit