Cannot Complete Installation Of Windows 7 On RAID 10 Setup
Feb 18, 2010
- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
View 5 Replies
ADVERTISEMENT
Jul 9, 2012
I am trying to install my windows 7 and it wont complete the setup. After all the files load from my original disks, the computer restarts and starts the setup but its been a blank screen for over 2 hours now and still nothing. I can use the restore from an image file and it sets up in 30 minutes and works but i have no home group setup and cant read some external hard drives right so I wanted to try a clean install. The computer is a Gateway 64 bit.
View 7 Replies
View Related
Jul 19, 2012
Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
View 1 Replies
View Related
Nov 1, 2009
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
View 11 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Mar 21, 2011
Homebuilt PC, all appears fine but when trying to install/setup Windows XP Mode, the green progess bar gets approximately 98% complete then goes red and a message "Cannot Complete Setup Please Try Again" appears. I have tried four or five times now and same thing every time.
My system:
OS Windows 7 Pro 64 bit
CPU Intel Q9550
Motherboard Nforce 750i SLI
Memory 6 GB RAM
Graphics Card Nvidia 9500GT
Sound Card Creative Sound Blaster X-Fi
Screen Resolution 1920 X 1080
View 6 Replies
View Related
Jun 9, 2011
i know theres another thread but instead of Hijacking his (i hate getting hijacked..) i'll start a new one,no wi tried the solution si've seen, chang emy username in Windows 7, defrag hard drive, download w/ IE, Firefox, Chrome, try another PC.. nada.its annoying because want to use it for Rosetta Stone: Japanese. and only issue running it in Windows 7 as is? as is it Will Not Find language CDs yet it will in XP.
[code]....
View 6 Replies
View Related
Dec 26, 2011
I recently set up a new computer, and managed to get a copy of Win 7 Ultimate. However, I get an ambiguous error when I attempt to set up the Windows XP Mode. I'm able to boot a virtual machine, and my CPU's VM options are turned on.
View 9 Replies
View Related
Feb 5, 2013
When I turned on my laptop, I was prompted to start windows normally, so I did. Then, it came up with an error message that read: "windows didn't start correctly" so I pressed okay and it came up with the start windows normally again and now I get a message to restore my computer, so I did and now it gives a message that says: Windows could not complete setup what do I need to do to get it back up and working correctly?
View 1 Replies
View Related
Mar 23, 2011
I'm looking to reinstall Windows 7 64 on my Gateway computer. I go into the advanced recovery options and tell it to reinstall to original factory. Everything is going well and the computer restarts to begin the process ... I choose my keyboard type at the prompt ... but then, I get this message in a dialogue box:
"Please complete operating system setup process before doing system recovery".
I have no idea what that means or what it is asking me to do. I've googled everywhere and can't find any info on it.
View 9 Replies
View Related
Sep 15, 2011
I have a Biostar mainboard with Sata Raid 0 enabled. I am trying to install win 7 sp1 but the install process asks for a driver. I thought the drivers are on the win 7 disk itself ? I do not have a floppy disc.
View 9 Replies
View Related
May 6, 2012
I am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0). Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with the appropriate intel SATA RAID drivers. Win7 recognizes that there is a compatible driver on the USB, installs it, but still says: "Windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". The format and create new partition options are grayed out for this volume.
Using the Intel Rapid Storage Technology tool, I combined the two drives into a raid0 volume. This is confirmed because when I restart, the raid volume shows up in the RST echo with the right size, and also indicates that the volume is bootable. It is also confirmed because the windows 7 setup only sees one 223GB disk. I have confirmed that in the BIOS, the SATA controller is set to RAID mode (not AHCI). I have confirmed that in the BIOS, the first boot option is "RAID intel SSD". I've tried the RAID drivers that came with the motherboard, Ive also tried the raid drivers available from intel and the latest raid drivers available from the motherboard MFR.
ASROCK extreme 6
Intel Core i7-3770k
16 GB RAM
2x intel 330 120GB SSD
NVIDIA GTX 680
View 1 Replies
View Related
Jul 27, 2011
something shut down my new laptop when i went to put on for some reason it needed to reinstall windows 7 home premium.... after loading windows files appears ....then it stops says please wait..... the screen goes black then reads setup is starting services a box appears andsays ........windows could not complete the installation............i push OK...it then says to install windows on this computer restart installation ............th;is happens over and over again....and nothing more........i have tried a restore,systems check,tried to open in safe mode,....
View 1 Replies
View Related
Dec 25, 2011
Just got a new HP laptop for Christmas (yeah. It's not even 7 on Christmas morning and I'm already having problems.) I've seen a lot of people with this problem, but I can't fix it the way they did. "Windows could not complete installation. To install Windows on this computer, restart the installation." Here's the catch:I can't start it in Safe Mode.I can't access task manager.F11 does nothing.I've tried alt+tab to see if these things are running in the background; they're not.I don't have any disks.It's an HP Pavilion dv7, and I got it refurbished.
View 3 Replies
View Related
Apr 3, 2011
I have just restored my c drive and now during setup is preparing your computer for first use a message appears saying windows could not complete the installation. To install windows on this computer, restart the installation. It shows this message everytime I startup and keeps resetting the computer
View 9 Replies
View Related
Jul 6, 2012
I had a Windows 7 installation but then installed Windows 8 over it, a few weeks ago.I felt like my computer was getting too bulky and slow, so I decided to restore it to the factory conditions (system restore) by using my Windows 7 recovery disc. The restore finished and restarted, and went right to the Windows 7 loading screen, where it ended in this error message: Quote: Windows could not complete the installation. To install Windows on this computer, restart the installation. I can't restart the installation though, since the "System Restore" option is grayed out on the Windows 7 recovery disc.
View 7 Replies
View Related
Jul 22, 2012
Error: Windows could not complete the installation. To install Windows on this computer, restart installation. Then it gives me the option to select ok, but when I do, it will keep repeating itself. The pc will not do anything else. I have tried F2 and selecting some options, but its still the same thing. I guess what I am trying to say, its that it does nothing else but repeat itself. I do not know what else to try.
View 9 Replies
View Related
Aug 8, 2012
so i was trying to do a clean reinstall of windows. so all was good till i got to the completing installation part where it just stoped and said windows could not complete installation restart and try again
after this is said setup is starting services then a pop up comes up saying windows could not complete installation. to install windows on this computer , restart theinstallation. after i restarted my labtop the same thing pops up and it loops this message and my system is a windows 7home p 64bit
View 4 Replies
View Related
Nov 8, 2011
I am totally at my wits end. Been trying to get Windows 7 Home Edition to work on my pc for the last 4 days but no joy.I installed it first on Sunday, which worked, loaded up and I started putting on my antivirus, updating graphics drivers and windows updates. Then, it all froze on me, and since then I have been unable to load Windows 7 at all. I assumed it was down to a corrupt download/update it had done, so I tried the Repair option on the Windows 7 disc. No fix there. So, I decided to format the drive, and redo a clean install, but now, it reaches Completing Installation stage, and either goes into a reboot loop, over and over, or it reaches the Setting Registry Settings, and then goes into a reboot loop. I've tried so many options through the google sites, but nothing is making it work again. Can anyone advise me what to do to fix this and get it working again?
View 11 Replies
View Related
Apr 22, 2012
I'm installing windows 7 from a usb hard drive because my laptop doesn't have cd the usb drive booted and it went good.
after the pc rebooted I don't the get the 'starting windows' screen and instead I get a black screen.
View 7 Replies
View Related
Apr 19, 2011
I have an Acer aspire 5732z windows 7 computer I tried to restore to factory settings from the same computer Everything was going well, but near the end of the installation appears like Windows can't complete the instalation because of some error! I have tried many times to reinstall it in all modes but I gets the point where tells me to reestar again and again?
View 1 Replies
View Related
Jun 9, 2012
i have a problem..my labtop isnt starting up. its constantly telling me that windows couldnt complete the installation. to install windows on this computer, restart the installation.
View 2 Replies
View Related
Aug 17, 2011
My sister has a miniHP 110, which was experiencing virus troubles, so I offered to do a factory restore. I have used that option several times on my regular HP laptop with no issues, but on her's, it's giving me the error message 'Windows cannot complete the installation in safe mode. to continue installing windows, restart the computer.' It goes on in a loop. I've tried booting it in safe mode, but to no avail. I've been playing around with it for a couple of days, and got to the screen where you choose accounts from. It said the account had been disabled, and to check with my administrator. I would go through the trouble of getting a windows 7 disk, but with this version of HPmini, there is no disk drive. I'm at a complete loss, is there anything I can do?
View 5 Replies
View Related
Feb 3, 2012
Trying to complete installation set up on my laptop for windows 7 professional. Accidentally turned off and wont complete installation even after restarting. The same message keeps coming back again and again.I do have the CD but I am unable to go past that message to attempt to reinstall.
View 9 Replies
View Related
Aug 2, 2010
I have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration. After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. "No signed Driver Found, Please insert CD/DVD/ Floppy", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.
After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed "during" the Windows installation. Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??
View 3 Replies
View Related
Dec 16, 2011
I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen appears, i already tried pressing CTRL M, CTRL R, CTRL I, Space, none of those seem to work.
I own the Maximus IV Extreme motherboard.
View 9 Replies
View Related
Apr 16, 2012
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 1 Replies
View Related
Jan 27, 2012
Client of mine has bought his notebook ASUS U31S with external DVD drive yesterday and he asked me to install windows 7 ultimate (origin was windows 7 home edition) beside other operating system Linux and Solaris.
I divided the 500 GB hard disk but didn't touch the hidden partition that has recovery.
I formatted the C partition that had windows 7 home edition and install a fresh copy of windows 7 ultimate,,,the process was smooth , first restart asking about username and computer name , password,,,etc ,,,,but with the second restart, PC kept rebooting without completing the windows installation.
Although I have used the same widnows 7 CD for his other new laptop and the installation went smooth without any problem.
I tried different media same problem. This laptop does have an external DVD driv, of course it is an LG and brand new
View 2 Replies
View Related
Aug 10, 2011
We took his computer back to factorysettings however when the system is trying to install Windows 7 we keep getting an error: Windows could not complete the installation. To install windows on this computer, restart the installation.How would I do that? I have tried safe mode but it won't let you install in safe mode, when shutting off the system or restartingit always gets to setup is starting services page and then the error message.
View 7 Replies
View Related
Aug 20, 2010
I am on the tail end of building my system. It has been quite and experience so far. After an already successful first build, the computer is OC at 3.9 ghz stable but then I felt the urge to upgrade my sole 1TB hard drive ( 32 MB Cache /3 mbs ) into a RAID 0 configuration,using 2 brand new WD 1TB hard drive, 64 MB Cache / 6 mbs, which my Asus supports. I am assuming that this will seriously improve speed and performance.trying to figure out the RAID setup in BIOS and a clean install of Windows 7 64 bit, I finally got it to work. The computer is now operational. But there is only concern I have...
I can't tell any MAJOR improvement ! A slight improvement in speed when I change windows and programs is notice.In addition, the transfer rate when I moved files to the new RAID was quicker at around 88 MBS. Why I am concern is because my Windows system assessment's score for hard disk transfer rate is only at 5.9, which is low and the same as before. Everything else is at 7.5 or higher. Also, I was hoping the load times of my files ( the thumbnail previews ) would increase in speed, but appears to be the same. I am somewhat certain that my RAID setup in BIOS was done correctly. The system is seeing one drive with a 2 TB capacity. I use my computer to do a lot of hd video editing.
1- Is there a way or to test, monitor, or tweak my RAID 0 setup for optimum performance?
2- Am I actually getting the best out of RAID 0 and my expectations were just too high?
3- Are there specifically " one " type of RAID 0 setup? ( I just want to eliminate the possibility of setting up RAID 0 incorrectly in BIOS ).
AMD 965 125 watt
ATI 5770
700 watt psu
M4a87td EVO
8 gigs of ddr-3 memory
Windows 7 64 bit home
WD 1TB hard drive 64 mb cache/ 6 mbs ( RAID O )
View 5 Replies
View Related
Dec 5, 2009
Can you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.
View 9 Replies
View Related