New Windows 7 Install After RAID Setup - No Signed Driver Found

Aug 2, 2010

I have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration. After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. "No signed Driver Found, Please insert CD/DVD/ Floppy", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.

After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed "during" the Windows installation. Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??

View 3 Replies


ADVERTISEMENT

Windows 7 Install On New Built - No Signed Device Drivers Were Found

Jan 8, 2013

I'm trying to install Windows 7 64 bit on a newly built PC; All pieces are brand new. While trying to install Win 7, I get past a couple of screens then I get stuck at a "Select the driver to be installed." screen. Whenever I click on any of the drives showing up I get an error message that says Load Driver "No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."

I have the bios set to boot from CD/ROM first, Hard disk second, and USB third. The bios reads the hard drive as the correct 1 TB that it is. The "OnChip SATA Type is [Native IDE]." I have checked and double checked that things are plugged in correctly, but do tell me if its still possible I did something wrong. I have also tried booting with a copy of Windows XP that I had laying around but that gave me an error about "unable to partition drive."

View 25 Replies View Related

Windows 7 Raid 0 Setup / Missing Raid Controller Driver

Nov 19, 2011

Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..

View 1 Replies View Related

"No Signed Device Drivers Were Found." - New Windows 7 Install

Nov 21, 2011

I just bought a new system and built it myself and was pleasantly surprised to see that it started up ok..now im trying to install windows 7 64-bit from a DVD and I get this message:"No signed device drivers wre found. Make sure that the installation media contains the correct dirvers, and then click OK."I went to ASUS's website and dl'd my HDD's driver and put it on a USB. The installation recognized it and I assume used it but I still have this issue. Basically when I go to select were I want to install windows, there's nothing there.I don't have a 4GB USB and was hoping I could fix this w/o one - I do have a phone with like 10GB storage but I think you have to wipe everything to install windows from a USB.....

Here's a list of my specs:

ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM

HITACHI HDS721050CLA362 (0F10381) 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive

GIGABYTE GV-N560UD-1G GeForce GTX 560 Ti (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML8GX3M2A1600C9W

ASUS P8Z68-V/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 ...

View 16 Replies View Related

Windows 7 Setup Can See RAID Volume But Cannot Install On It?

May 6, 2012

I am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0). Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with the appropriate intel SATA RAID drivers. Win7 recognizes that there is a compatible driver on the USB, installs it, but still says: "Windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". The format and create new partition options are grayed out for this volume.

Using the Intel Rapid Storage Technology tool, I combined the two drives into a raid0 volume. This is confirmed because when I restart, the raid volume shows up in the RST echo with the right size, and also indicates that the volume is bootable. It is also confirmed because the windows 7 setup only sees one 223GB disk. I have confirmed that in the BIOS, the SATA controller is set to RAID mode (not AHCI). I have confirmed that in the BIOS, the first boot option is "RAID intel SSD". I've tried the RAID drivers that came with the motherboard, Ive also tried the raid drivers available from intel and the latest raid drivers available from the motherboard MFR.

ASROCK extreme 6
Intel Core i7-3770k
16 GB RAM
2x intel 330 120GB SSD
NVIDIA GTX 680

View 1 Replies View Related

"No Signed Drivers Were Found" When Trying To Install?

Apr 12, 2012

When I try to install Windows 7, I get the error "No signed drivers were found" and my HD does not show up. My Hard Drive is a Hitachi HDS721010CLA332.'ve tried numerous things, from changing my HD to ACHI and such, but still no luck. I currently have Windows XP 64 bit installed, so I can not upgrade with the disc. I've also tried downloading a OEM W7 home premium disc, since that is what was on it before and I have the serial on my tower, but it still did not work.

View 6 Replies View Related

Setup Raid 0 After Install?

Dec 5, 2009

Can you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.

View 9 Replies View Related

Win7 X64 Won't Recognize My Raid Drivers As Signed

Nov 5, 2009

I've been running the RC for around 3 months now and love it. I didn't have any issues when I installed it. I added the drivers for my raid card when the select partition option came up, it installed them and away it went. Now that I'm trying to install the retail version it insists that my drivers are unsigned and that's the end of that.

I've tried using the repair system work around to get the drivers loaded; but that option says that the drivers don't match my installed hardware. I'm using the exact same driver I used for the RC, on the same thumb drive in fact. Plus, Promise says they're signed. I know there isn't a problem with the raid card because I'm on the system now. Anybody have any ideas?

View 1 Replies View Related

SSD RAID Windows Isn't Found

Jan 1, 2012

I built my own PC with 2 Crucial M4 64GB SSDs in a RAID 0 logical drive as the boot/Windows drive. Everything was fine for about eight months then yesterday I got a BSOD with the code 0x...F4. The machine automatically rebooted and a message about insert boot device came up. The RAID utility that comes up during post shows the Logical drive. I put in the Windows installation CD to try and repair but it doesn't detect an existing Windows installation. When I try the installation process, after adding the appropriate RAID drivers, the installer sees the drive so I think I could reinstall but I don't know how that would effect the data on the partition. I also have a logical data drive of two 2TB HDDs;if I reinstall on the SSDs will the data on those drives be lost? I also have an external drive that I had setup for Windows Backup; will I be able to access that after a reinstall? And my biggest concern is that if this happened once and I dont' know why, could it happen again? Maybe there is something wrong with the SSDs? I'm not sure how to troubleshoot this or how to proceed.

View 6 Replies View Related

Windows 7 Install On New Build With RAID 0 Driver

Jan 24, 2013

Recently completed my first computer build and am trying to install windows with a raid 0 on 2 500g HDD. I have it set up in the BIOS for 1-4 and 5-6 sata ports to RAID. When I boot from the dvd drive with the windows disk, after clicking install windows, it says: "a required cd/dvd drive device driver is missing" I figured this was a driver for the raid but i cant find it anywhere. if i select browse, there is a boot (x folder but i dont see anything in there that would help me. Do i need to download a driver to a usb stick and pull it off there? adn if yes where could i get the driver? i cant find it on the asus website.

here is my setup:
asus m5a97 LE R2.0 mobo
XFX Radeon 7870
AMD 8350 Processor

View 1 Replies View Related

Setup Sata Raid 0 On Windows 7?

Sep 15, 2011

I have a Biostar mainboard with Sata Raid 0 enabled. I am trying to install win 7 sp1 but the install process asks for a driver. I thought the drivers are on the win 7 disk itself ? I do not have a floppy disc.

View 9 Replies View Related

Cannot Reinstall Windows 7 After Virus - RAID Not Found In Task Manager

Dec 28, 2010

My Acer 7736Z-4809 laptop (pre-installed with Win7 Home Premium 64bit, so I don't have the Win7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked.

I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive." Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse).

Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.

BIOS Setup Defaults:
Quiet Boot: [Enabled]
Network Boot: [Enabled]
F12 Boot Menu: [Disabled]
D2D Recovery: [Enabled]
SATA Mode: [AHCI]

View 8 Replies View Related

Cannot Complete Installation Of Windows 7 On RAID 10 Setup

Feb 18, 2010

- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.

- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.

- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.

- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.

- Then 1st re-start

- Windows continues to install (finalizing things, registry update, etc).

- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then

BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.

I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.

Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.

View 5 Replies View Related

Driver Not Found For Windows 7 Install

May 23, 2011

I also have a Liteon ihas424 98B DVD writer, that win7-64 will not recognize during install (but it reads the win7 install DVD..) Installed win7-32 and all is fine. Used PLDS smartpack utility to update the DVD firmware, to latest level. Ran twice, 2nd time no update. rebooted to win7-64 install dvd, win7-64 install still pops error right before unpacking files, CD/DVD driver missing... I gotta say huh? win7-32 has the driver, 64 does not?I will try to find another win7-64 install dvd.

View 4 Replies View Related

Driver Not Found For Windows 7 Install

Jul 26, 2010

This was my first time building a computer and everything went smoothly until the Windows 7 64bit installation. Right after the installation starts, a box pops up that says a "Required CD/DVD drive driver is not found" and that I can take out my Windows CD to install the driver. My CD/DVD drive is a LiteOn iHAS424-98 and the manual says that it should be ready for installation with Windows 7 without any drivers. The drive did come with a CD for Nero 9 and drivers/manuals, but when I put that CD in at the appropriate time, it still says no drivers are found. I looked at reviews for the drive on newegg and most of them said their installation went smoothly, but a couple seemed to have similar problems. However, each time they seemed to be caused by different things. I do not have another copy of Windows so I am trying to find solutions other than buying another copy. I'm not sure what's going on with it.

View 8 Replies View Related

Windows Mouse Driver Files Not Digitally Signed

Oct 5, 2011

Acer 5253 laptop, Windows 7 Home Premium 64bit SP1, AMD C-50.

Trying to use a USB mouse. I have 3 logitech mice. None work because hidclass.sys and hidusb.sys are not digitally signed. If I f8 and disable driver signing enforcement, all 3 mice work, so I'm pretty certain that's the issue.

Tried "Update Driver" via device manager. Windows determined that I already had the best driver and wouldn't do anything. Logitech does not furnish drivers for Windows 7. They rely on the native drivers.

Acer does not furnish mouse drivers. They refer you to the manufacturer of the mouse. Tried copying the files in question from a 64bit machine that showed them to be digitally signed. Renamed the ones on my machine and pasted the ones from the "good" machine. Resolved nothing.

chkdsk /r found problems and repaired them. Didn't help.

sfc /scannow found problems that it could not resolve. Looked in CBS.log and found no references to either of the sys files in question. No resolution.

System Restore only had one restore point, and it was from 2 days ago. Problem was already noticed by then. I suspect that it's been this way since I purchased the laptop a couple of months ago anyway, but if there had been a restore point back at the very beginning, I'd have tried that.

I don't know much about digital signing of drivers. I've seen in a couple of threads that I might be able to sign the drivers myself, but haven't been able to find out the actual steps to do so. Is the digital signature part of the driver file itself? Or is it another file? If so, where's that file? Or is it a registry entry? If so, can I manipulate that to resolve the problem?

I miss XP. All I want to do is use the simplest of all plug and play devices. It's been about 3 weeks and I still can't get Windows 7 to cooperate.

View 4 Replies View Related

How To Setup Raid 0 With SSD

Dec 16, 2011

I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen appears, i already tried pressing CTRL M, CTRL R, CTRL I, Space, none of those seem to work.

I own the Maximus IV Extreme motherboard.

View 9 Replies View Related

Windows 7 Requires Digitally Signed Driver For Xtatix Peeper (XCA-PP2)

Jun 28, 2012

Where to download the proper drivers for Xtatix Peeper xca-pp2? Windows 7 is not allowing this program to opeate because it requires a digitally signed driver. I have visited the manufacturer's website, but it still does not work.

View 1 Replies View Related

Windows 7 Requires Digitally Signed Driver For Xtatix Peeper Xca-pp2

Jun 28, 2012

where to download the proper drivers for Xtatix Peeper xca-pp2? Windows 7 is not allowing this program to operate because it requires a digitally signed driver. I have visited the manufacturer's website, but it still does not work.

View 1 Replies View Related

Driver Is Not Signed

Jan 5, 2010

In my windows 7 installment it gives the error: driver not signed. I need this RAID-driver to be signed for x64. How can i sign a driver. It is the GIGABYTE SATA2 RAID Driver.

Answer:-

Here's how to install Windows 7 using unsigned drivers:

Copy your unsigned driver to USB stick or other media (you will probably need only one .inf and a .sys file)

Start Windows 7 setup.

At this point, Do Not Select 'Install' as your RAID controller will not be detected if it's not supported by Win7

Click 'Repair'.

Wait for the pseudo-scanner to finish.

Click load driver.

Point to your unsigned driver (the .inf file) you previously copied to USB stick or other media.

Wait again for the pseudo-scanner to finish.

Click the 'x' in the corner to close the repair mode.

Click 'Install' to start the installation.

Now your RAID controller and RAID Drives will be detected and there will be no warning of unsigned drivers.

Everything should proceed just fine from this point on.

View 1 Replies View Related

Test My RAID-0 Setup ?

Aug 20, 2010

I am on the tail end of building my system. It has been quite and experience so far. After an already successful first build, the computer is OC at 3.9 ghz stable but then I felt the urge to upgrade my sole 1TB hard drive ( 32 MB Cache /3 mbs ) into a RAID 0 configuration,using 2 brand new WD 1TB hard drive, 64 MB Cache / 6 mbs, which my Asus supports. I am assuming that this will seriously improve speed and performance.trying to figure out the RAID setup in BIOS and a clean install of Windows 7 64 bit, I finally got it to work. The computer is now operational. But there is only concern I have...

I can't tell any MAJOR improvement ! A slight improvement in speed when I change windows and programs is notice.In addition, the transfer rate when I moved files to the new RAID was quicker at around 88 MBS. Why I am concern is because my Windows system assessment's score for hard disk transfer rate is only at 5.9, which is low and the same as before. Everything else is at 7.5 or higher. Also, I was hoping the load times of my files ( the thumbnail previews ) would increase in speed, but appears to be the same. I am somewhat certain that my RAID setup in BIOS was done correctly. The system is seeing one drive with a 2 TB capacity. I use my computer to do a lot of hd video editing.

1- Is there a way or to test, monitor, or tweak my RAID 0 setup for optimum performance?

2- Am I actually getting the best out of RAID 0 and my expectations were just too high?

3- Are there specifically " one " type of RAID 0 setup? ( I just want to eliminate the possibility of setting up RAID 0 incorrectly in BIOS ).

AMD 965 125 watt
ATI 5770
700 watt psu
M4a87td EVO
8 gigs of ddr-3 memory
Windows 7 64 bit home
WD 1TB hard drive 64 mb cache/ 6 mbs ( RAID O )

View 5 Replies View Related

How To Boot From A Raid-1 Setup

Feb 18, 2012

my goal is to boot windows 7 x64 with raid-1. My boot drive is a SSD, which is not part of the raid array. I have 3 seagate ST2000DM001 that I want in raid-1. I have tried installing windows 7 with ahci in bios first but no luck. I was able to boot from raid1 when I started bios out in raid but my ssd drives read/write speeds significantly decreases.

View 3 Replies View Related

Raid 5 Setup Button Is Greyed

Jun 23, 2012

I was wondering how i can enable Raid-5 in my windows X64 professional ? _The button for raid 5 is greyed out right now and i wonder why ?the motherboard i use is a GIGABYTE GA-890FXA-UD5 AM3 ATX

View 9 Replies View Related

How To Setup Raid 1 On Existing System 7

Nov 19, 2009

I have a smooth running Windows 7 system. I want to convert it to a Raid 1 system. I have a ASUS Rampage Formula motherboard with a Intel X48 chipset and ICH9R installed. It has 4gb memory, Core 2 Quadand a WD 640 gb drive. I have purchased another WD 640 to setup the Raid 1 array. I cannot find anyone who has installed it on a running system, they all build a new system. Can you install Rain 1 on a running system? If so how do you do it?

View 14 Replies View Related

Re-Setup RAID 1 On Existing Drives?

Feb 21, 2013

I've been having some issues with a computer that belongs to CEO of the company I work for. It was built by his son in law and that son in law doesn't really have time to work on it anymore so fortunately "end of sarcasm" that responsibility falls on me.Computer was running great until about two or three months ago where after shutting it down for the night and turning it back on in the morning would cause the computer to reboot three times after going through POST and during 4th time he was able to boot into OS (WIN7 64bit). I updated his bios and that seemed to fix the problem, BUT the computer was set in a Raid 1, but for some reason it is no longer set up that way. I see both HDD as separate HDD in "My Computer" C: & D:, both are 600GB with about 400GB of space free. How can I return them into their raid 1 configuration? MOBO is GA-X58A-UD7 Rev 2, Intel Core i7 970 cpu with 12GB DDR3 RAM Total. He has about $10,000 worth of programs on it (Electrical & Mechanical Engineer) and it would take me weeks if I had to start from scratch.

View 1 Replies View Related

Signed Driver Is Not Being Installed

Jan 31, 2012

I've signed a device driver, still it is giving error "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".

View 6 Replies View Related

Windows 7 Setup Cannot Found Hard Drive

Jul 4, 2012

During the reinstallation of Windows 7, the operating system did not find the hdd. on some forum I visit they have to say download the drivers. but I do not know where to find its drivers. [code]

View 1 Replies View Related

How To Setup RAID 0 With An Asus CG5290 BP007 ?

Sep 1, 2009

How to setup RAID 0 with an Asus CG5290-BP007?

I bought an Asus Desktop CG5290-BP007 at best buy, when I opened it says RAMPAGE II GENE/CG5290/DP MB

Asus CG5290
motherboard: Rampage II Gene Micro Atx
Processor: Intel I7 920 (2.66 Ghz)
Ram: 9GB
HD: Seagate 1TB 7200 RPM
Windows Vista Home Premium 64

If you want to see the link here it is: http://www.bestbuy.com/site/olspage.jsp?skuId=9366642&type=product&id=1218092150864

I removed the Seagate and I put 2 WD Velociraptors 300 GB each and 10,000 RPM, I have a concern, one it is on the port 1 and the other velociraptor is on port 3.

Does it affect in order to make appear the RAID option in the bios? Because it does not appear, it just appears these options: IDE and AHCI. How come it does not appear RAID in the bios options?

What am I doing wrong? Or what do I have to do in order to setup in the bios as RAID?

I don’t know if this link below it is exactly my motherboard, it seems that my desktop came a little bit different than this motherboard or they designed specially just for best buy, I am not sure about it.

http://usa.asus.com/product.aspx?P_ID=6i86Hj0lGriFHfY9

I took several pictures to show you what appears when I turn on the computer and when press <Del> to enter in the bios and when I just turn on the computer and I don’t do anything.

I went to Asus website and I downloaded the manual for Rampage II Gene Motherboard, I was reading it and It says that Intel Matrix Storage Manager option Rom utility will appear when I press CTRL + I , I tried it several times and nothing happens, is that option working in my Asus Desktop CG5290-BP007 ?

Please help me what to do, I would like to install Windows 7, my hard disks are not formatted I think so, because I just installed them and I am not able to see RAID in the bios options, Please tell what steps to follow in order to setup RAID 0 in this computer.

View 8 Replies View Related

Windows 7 Setup Not Recognizing HDD - No Device Drivers Found

Feb 3, 2011

I'm trying to create a dual boot with win7 and ubuntu. I want to install win7 first and then the other os. So, using Gparted, if I create a partition, formatted or not, win7 setup will not recognize my hdd and i get the above error message. "No device drivers found". If I set my hdd space as unallocated, it gets recognized, but setup tells me it's unable to install windows into any of the drives. No further information is delivered.

The thing is I can easily install ubuntu and set it up. So there's nothing wrong with my hdd. Why would windows not recognize it and request for the drivers? I went to the Hitachi website, but they tell me there are no drivers available, since all OSs already have that information. I wonder why I'm having such a hard time installing win7. Ubuntu clearly works and installs smoothly and no errors occur.

More info:
- Installing Windows 7 Ultimate 64bit
- HDD (500gb) is empty, expect for one OEM recovery partition (12gb)

View 1 Replies View Related

RAID Array Setup - How To Get Into BIOS And Change Settings

Jun 21, 2012

I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:

Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM

I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?

View 3 Replies View Related

Master Folder For Multiple Hard Drives Without Raid Setup

Jul 18, 2012

I am in the process of putting (5) 3TB HDD's into my computer (Windows 7 Home Premium 64 bit) to rip my Blu-ray collection to for playback in my home theater room via a Popcorn Hour player. Each drive is independent and I will be systematically filling one drive before going onto the next.The problem is that the Popcorn Hour players communicate with the PC by specifying one folder via SMB that contains all of my media. Since I am doing independent drives, there will be one master folder on each drive containing all of the media for that said drive. Meaning, in terms of the Popcorn Hour/SMB setup, there are five folders I need it to *see* and catalog.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved