Re-Setup RAID 1 On Existing Drives?
Feb 21, 2013
I've been having some issues with a computer that belongs to CEO of the company I work for. It was built by his son in law and that son in law doesn't really have time to work on it anymore so fortunately "end of sarcasm" that responsibility falls on me.Computer was running great until about two or three months ago where after shutting it down for the night and turning it back on in the morning would cause the computer to reboot three times after going through POST and during 4th time he was able to boot into OS (WIN7 64bit). I updated his bios and that seemed to fix the problem, BUT the computer was set in a Raid 1, but for some reason it is no longer set up that way. I see both HDD as separate HDD in "My Computer" C: & D:, both are 600GB with about 400GB of space free. How can I return them into their raid 1 configuration? MOBO is GA-X58A-UD7 Rev 2, Intel Core i7 970 cpu with 12GB DDR3 RAM Total. He has about $10,000 worth of programs on it (Electrical & Mechanical Engineer) and it would take me weeks if I had to start from scratch.
View 1 Replies
ADVERTISEMENT
Nov 19, 2009
I have a smooth running Windows 7 system. I want to convert it to a Raid 1 system. I have a ASUS Rampage Formula motherboard with a Intel X48 chipset and ICH9R installed. It has 4gb memory, Core 2 Quadand a WD 640 gb drive. I have purchased another WD 640 to setup the Raid 1 array. I cannot find anyone who has installed it on a running system, they all build a new system. Can you install Rain 1 on a running system? If so how do you do it?
View 14 Replies
View Related
Jul 18, 2012
I am in the process of putting (5) 3TB HDD's into my computer (Windows 7 Home Premium 64 bit) to rip my Blu-ray collection to for playback in my home theater room via a Popcorn Hour player. Each drive is independent and I will be systematically filling one drive before going onto the next.The problem is that the Popcorn Hour players communicate with the PC by specifying one folder via SMB that contains all of my media. Since I am doing independent drives, there will be one master folder on each drive containing all of the media for that said drive. Meaning, in terms of the Popcorn Hour/SMB setup, there are five folders I need it to *see* and catalog.
View 9 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Dec 9, 2010
I'm currently using Windows 7 Professional and have 4 internal HD's set up in RAID. Current Setup: 2 - 500GB drives in RAID 0 2 - 500GB drives in RAID 1
I use the RAID 1 drives for backup purposes only. I have 3 partitions on Raid 0, named as follows: A:,B:,C: I have the OS (Windows 7) installed on C: partition and use the other two partitions on RAID 0 for data. Future Setup: I have just bought the Intel X-25 120GB SSD and would like to do a clean OS install on the SSD and still keep my RAID 0 and RAID 1 setup for other data.
Here's my question: 1. How can I install the OS on SSD without disrupting any data on the RAID 0 and RAID 1 HD's?
I would like to be able to install the OS on SSD and still have access to the data on my previous C: drive on RAID 0 (including the OS data). I want to delete the OS data on the RAID 0 HD from within Windows(on SDD) if that makes. Will that be possible?
I'm afraid of losing my RAID drives/data. I have read that I should unplug the RAID drives before I install Windows on SDD and then re-plug them again. Is there a particular order I should do that in? Will the BIOS recognize the old set up if I unplug/re-plug the old drives? way to install Windows on the single SSD without losing the existing RAID 0 & RAID 1 setup and data.
View 8 Replies
View Related
Sep 12, 2011
i want to change my existing install too raid0 i currently have install/programs on one 1tb drive and media/games on another 1tb drive, i have a spare 2tb drive unusedwhat are your suggestions so i reduce the amount of lost programs etc
View 4 Replies
View Related
Apr 1, 2012
As part of the chipset driver installation, it also installed the RAID and SATA drivers that Nvidia provides.I have a 300GB HDD on the primary IDE channel although I currently boot from one of my SATA hdd's.How would I go about transferring my OS to a RAID 0?Would it be possible to just system image my current OS onto the IDE drive and then format my two SATA hdd's, enable RAID in BIOS and then use Seagate Disc Wizard to install the system image onto the RAID 0?Is seagate disc wizard capable of transferring to a RAID drive??Have the RAID drivers definitely been installed with the Chipset drivers and will Windows recognise the RAID array?Have heard that you have to set up a boot partition the same size as the image on the RAID 0, would it then be possible to expand that to use the entire RAID partition
View 4 Replies
View Related
Jan 3, 2011
I have the following MOBO:
ASUS P7P55D-E EVO
2X80gb Western Digital SATA Drives
2x2TB Samsung Spintpoint SATA Drives
I have already been using the machine with another 80Gb Western Digital SATA Drive with Windows 7 Pro 64Bit installed and now want to convert to RAID 5 for redunancy in case of Drive failure (We all say we will back up but we are all lazy when it comes to it LOL).I have taken out the original OS drive and plugged it into the E-SATA connector on the MOBO, gone into the BIOS, turned on RAID for the SATA Ports on the MOBO, and connected the 2 X 80Gb Boot drives. Entered the Hardware RAID Controller POST, and created the RAID 5 Volume from the 2 X 80Gb Discs.Now boot with Acronis Wester Digital edition.Clone the Original 80Gb Disc to the new Raid Array.Shut machine off, remove original OS 80gb Disc from E-SATA port.Boot machine.It starts to boot, and gets as far as the Windwos 7 Microsoft 4 Colour logo and then I get an error and then have to boot into Windows 7 from DVD and go through the repair process.When the Repair has run it reports the following:
The following startup option will be repaired:
Name: Windows Boot Manager
Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows Recovery Environment (recovered)
Path: Recoverye52d0bc2-1f15-11df-af10-d764fe3715b8Winre.wim
Windows Device: Partition=D76190 MB)
A copy of the current boot configuration data will be saved as:C:BootBCD.Backup.0001 However it fails to do the update How do I get this RAID to boot successfully? I *don't* want to have to re-install the Operating System as that is just too painful a thought?
View 2 Replies
View Related
Jun 2, 2011
I have a problem with migration from AHCI to RAID on existing win 7 x64. I had AHCI HDD connected to marvell SATA 6gbit controller. I wanted to create RAID 0 on intel controller (ICH10) I created hdd image in acronis. Enabled RAID in bios and Created RAID 0 disk (2 x hdd) Restored from image to new raid hdd . When I try to boot win i get blue screen . error 0x0000007B ( so win cant recognize hdd)When I boot from win CD installer have access to raid disk what shall I do? I my opinion system doesn't have access to raid drivers. (maybe missing registry entries) i system32/drivers i have file iastor.sys but probably there is no registry entries how to add registry entries to system? How can I boot system??? ( in rescue mode windows also doesn't start)
View 4 Replies
View Related
Aug 13, 2012
I built my PC(Window 7 64 bit pro) year and an half ago with SSD, but now i planning to start my business, i am thinking to put to get two new SSDs on my pc to set up as RAID 1 (if i remember correctly, it help to store data in case one die)thinking to get Intel, but i hear some bad thing regarding to Intel with sandforce SSD, can someone point what is going to effect my pc?is it possible to clone my ext'g SSD with the OS to new RAID SSDs, then use the old SSD for minor storage, so my PC will never have problem with the SSD(if it does i just replace one of them) which software should i use for clone and how do i set up the RAID 1 if i do it.
View 3 Replies
View Related
Apr 19, 2012
I have a setup running with 1 physical SATA disk divided in two partitions (C,D). Tomorrow i am receiving an 120GB SSD. I am planning on disconnecting the HDD and plugging the SSD with AHCI enabled in the bios and performing a clean install.I need help for the steps after that, what is going to happen when i plug in the HDD in the 2nd SATA port? Will windows boot from the SSD and see the two partitions as D & E? If this is the case can i merge the 2 partitions after that and not lose any data? The purpose as you can see is to install fresh Win 7 on the SSD and plug in the HDD after that for storage purposes only but want 1 partition to it.
View 10 Replies
View Related
Nov 6, 2012
My Windows 7 Pro x64 has twice had to be completely reinstalled after serious faults.Each time before the crash Virtual XP had been installed and had created its own VHD.Both VHDs have been preserved, but the Virtual machine(s) have apparently isappeared. On each Windows 7 reinstallation, the important folders from the previous version were saved in a Windows.Old folder. I now want to reinstall VirtualXP and choose one of the old VHDs rather than create yet another one. What is the easiest and fastest way to do that?
View 3 Replies
View Related
Dec 26, 2011
I have a system with three hard disks on them. The Primary one has the OS and some programs. Secondary one has programs and data (like pictures and such). Third one has data and backup data.I recently formatted the Primary drive which had Windows Vista on it, and did a full install of Windows 7 Pro.After the install, the Secondary and Tertiary disks showed up in disk management; I just had to assign drive letters to them.The issue: I can see the existing Secondary and Tertiary disks in windows explorer. I can go into properties on each hard disk and see that there is used disk space on them (so the data is still there). But Windows Explorer shows both hard disks as empty. I can't actually see any of the data. What can I do to fix this...obviously without formatting the disks and losing the existing data on there? Is this perhaps a driver issue?
View 5 Replies
View Related
Jul 15, 2010
So I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
View 4 Replies
View Related
Dec 16, 2011
I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen appears, i already tried pressing CTRL M, CTRL R, CTRL I, Space, none of those seem to work.
I own the Maximus IV Extreme motherboard.
View 9 Replies
View Related
Nov 11, 2011
I'm trying to stripe two drives using the disk management tool. Both partitions give me the option to stripe them but when I use the wizard the other drive doesn't show up to allow me to raid to it! Both drives have partitions on them at the moment, but I was under the impression that this will make a raid partition rather than a drive.
View 3 Replies
View Related
Aug 20, 2010
I am on the tail end of building my system. It has been quite and experience so far. After an already successful first build, the computer is OC at 3.9 ghz stable but then I felt the urge to upgrade my sole 1TB hard drive ( 32 MB Cache /3 mbs ) into a RAID 0 configuration,using 2 brand new WD 1TB hard drive, 64 MB Cache / 6 mbs, which my Asus supports. I am assuming that this will seriously improve speed and performance.trying to figure out the RAID setup in BIOS and a clean install of Windows 7 64 bit, I finally got it to work. The computer is now operational. But there is only concern I have...
I can't tell any MAJOR improvement ! A slight improvement in speed when I change windows and programs is notice.In addition, the transfer rate when I moved files to the new RAID was quicker at around 88 MBS. Why I am concern is because my Windows system assessment's score for hard disk transfer rate is only at 5.9, which is low and the same as before. Everything else is at 7.5 or higher. Also, I was hoping the load times of my files ( the thumbnail previews ) would increase in speed, but appears to be the same. I am somewhat certain that my RAID setup in BIOS was done correctly. The system is seeing one drive with a 2 TB capacity. I use my computer to do a lot of hd video editing.
1- Is there a way or to test, monitor, or tweak my RAID 0 setup for optimum performance?
2- Am I actually getting the best out of RAID 0 and my expectations were just too high?
3- Are there specifically " one " type of RAID 0 setup? ( I just want to eliminate the possibility of setting up RAID 0 incorrectly in BIOS ).
AMD 965 125 watt
ATI 5770
700 watt psu
M4a87td EVO
8 gigs of ddr-3 memory
Windows 7 64 bit home
WD 1TB hard drive 64 mb cache/ 6 mbs ( RAID O )
View 5 Replies
View Related
Dec 5, 2009
Can you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.
View 9 Replies
View Related
Feb 18, 2012
my goal is to boot windows 7 x64 with raid-1. My boot drive is a SSD, which is not part of the raid array. I have 3 seagate ST2000DM001 that I want in raid-1. I have tried installing windows 7 with ahci in bios first but no luck. I was able to boot from raid1 when I started bios out in raid but my ssd drives read/write speeds significantly decreases.
View 3 Replies
View Related
May 9, 2012
in my PC there are some drives with RAID0 arrays and from little time I have bought a SSD for Operative System (Windows 7).in your opinion (on the BIOS) is it better making the Boot with SSD or with another drive with RAID0?
View 9 Replies
View Related
Mar 26, 2011
I have two 1.5TB WD HDs that I am going to use soley for storage, these will not be for the OS drive. If I place them in a Windows 7 Software RAID 1 configuration, and say my main OS drive was to fail. I would have to rebuild my OS drive on a new HD. Now when I do this, will the new install of Windows 7 I do at the time pick up my previous Windows 7 Software RAID 1 for my storage drives or do I lose the array? I am scared that if I lost my OS drive, my R1 storage array would go as well if Windows 7 keeps some kind of settings or configuraiton to manage the array.
View 1 Replies
View Related
Jun 23, 2012
I was wondering how i can enable Raid-5 in my windows X64 professional ? _The button for raid 5 is greyed out right now and i wonder why ?the motherboard i use is a GIGABYTE GA-890FXA-UD5 AM3 ATX
View 9 Replies
View Related
Sep 15, 2011
I have a Biostar mainboard with Sata Raid 0 enabled. I am trying to install win 7 sp1 but the install process asks for a driver. I thought the drivers are on the win 7 disk itself ? I do not have a floppy disc.
View 9 Replies
View Related
Feb 18, 2010
- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
View 5 Replies
View Related
May 6, 2012
I am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0). Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with the appropriate intel SATA RAID drivers. Win7 recognizes that there is a compatible driver on the USB, installs it, but still says: "Windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". The format and create new partition options are grayed out for this volume.
Using the Intel Rapid Storage Technology tool, I combined the two drives into a raid0 volume. This is confirmed because when I restart, the raid volume shows up in the RST echo with the right size, and also indicates that the volume is bootable. It is also confirmed because the windows 7 setup only sees one 223GB disk. I have confirmed that in the BIOS, the SATA controller is set to RAID mode (not AHCI). I have confirmed that in the BIOS, the first boot option is "RAID intel SSD". I've tried the RAID drivers that came with the motherboard, Ive also tried the raid drivers available from intel and the latest raid drivers available from the motherboard MFR.
ASROCK extreme 6
Intel Core i7-3770k
16 GB RAM
2x intel 330 120GB SSD
NVIDIA GTX 680
View 1 Replies
View Related
Sep 1, 2009
How to setup RAID 0 with an Asus CG5290-BP007?
I bought an Asus Desktop CG5290-BP007 at best buy, when I opened it says RAMPAGE II GENE/CG5290/DP MB
Asus CG5290
motherboard: Rampage II Gene Micro Atx
Processor: Intel I7 920 (2.66 Ghz)
Ram: 9GB
HD: Seagate 1TB 7200 RPM
Windows Vista Home Premium 64
If you want to see the link here it is: http://www.bestbuy.com/site/olspage.jsp?skuId=9366642&type=product&id=1218092150864
I removed the Seagate and I put 2 WD Velociraptors 300 GB each and 10,000 RPM, I have a concern, one it is on the port 1 and the other velociraptor is on port 3.
Does it affect in order to make appear the RAID option in the bios? Because it does not appear, it just appears these options: IDE and AHCI. How come it does not appear RAID in the bios options?
What am I doing wrong? Or what do I have to do in order to setup in the bios as RAID?
I don’t know if this link below it is exactly my motherboard, it seems that my desktop came a little bit different than this motherboard or they designed specially just for best buy, I am not sure about it.
http://usa.asus.com/product.aspx?P_ID=6i86Hj0lGriFHfY9
I took several pictures to show you what appears when I turn on the computer and when press <Del> to enter in the bios and when I just turn on the computer and I don’t do anything.
I went to Asus website and I downloaded the manual for Rampage II Gene Motherboard, I was reading it and It says that Intel Matrix Storage Manager option Rom utility will appear when I press CTRL + I , I tried it several times and nothing happens, is that option working in my Asus Desktop CG5290-BP007 ?
Please help me what to do, I would like to install Windows 7, my hard disks are not formatted I think so, because I just installed them and I am not able to see RAID in the bios options, Please tell what steps to follow in order to setup RAID 0 in this computer.
View 8 Replies
View Related
Sep 15, 2010
I recently sold a pair of drives which i had installed Windows 7 onto.The drives were configured as AHCI in the bios.The buyer has come back to me witht he following message: i received the hard drives today. i can install windowsd 7 in the 2 drives. whats wrong? i try in raid mode and non raid mode and nothing.says that i can install files in this discs. what operating system was there befShort of them being damaged in transit I cannot see any reason why they would not allow Windows 7 to install on themAm I missing something? I have asked him to supply details of his motherboard. Are there any other questions I should ask?
View 5 Replies
View Related
Jun 21, 2012
I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
View 3 Replies
View Related
Aug 2, 2010
I have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration. After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. "No signed Driver Found, Please insert CD/DVD/ Floppy", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.
After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed "during" the Windows installation. Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??
View 3 Replies
View Related
Oct 23, 2012
I recently upgraded to an SSD. I moved windows 7 over to the new SSD and re-aligned the partition properly The drive setup is as follows:
2x 500GB WD Black drives in RAID 0
1x 120GB ADATA S510 SSD
In BIOS, RAID mode is enabled. You cannot enable RAID for one pair of drives and AHCI separately. I was assuming disks that are not part of the logical RAID volumes would be set to AHCI automatically. I have enabled NCQ in AMD RaidExpert for the SSD.WEI is 5.9 for the primary disk. The primary disk is the SSD.Other strange behanivour is that the RAID array and the SSD both appear as SCSI devices in device manager, and Windows won't accept the ahci drivers from ECS.
View 3 Replies
View Related
