NEW 2 SSD RAID1 Setup With Existing OS SSD
Aug 13, 2012
I built my PC(Window 7 64 bit pro) year and an half ago with SSD, but now i planning to start my business, i am thinking to put to get two new SSDs on my pc to set up as RAID 1 (if i remember correctly, it help to store data in case one die)thinking to get Intel, but i hear some bad thing regarding to Intel with sandforce SSD, can someone point what is going to effect my pc?is it possible to clone my ext'g SSD with the OS to new RAID SSDs, then use the old SSD for minor storage, so my PC will never have problem with the SSD(if it does i just replace one of them) which software should i use for clone and how do i set up the RAID 1 if i do it.
View 3 Replies
ADVERTISEMENT
Nov 22, 2011
I have an OCZ Vertex 3 SSD and 2 WD caviar blue HDDs. I have them installed on an ASUS Maximus IV Gene-Z MB. I have Win 7 Home Installed on the SSD and would like to set up a RAID 1 array with the HDDs for my data storage (music, pictures, etc.). From what I understand I must do a hardware RAID setup since Win 7 Home does not support the software RAID array. The only information I could find is how to install windows on the array and not use it as a non-bootable array for data storage.
View 5 Replies
View Related
Nov 19, 2009
I have a smooth running Windows 7 system. I want to convert it to a Raid 1 system. I have a ASUS Rampage Formula motherboard with a Intel X48 chipset and ICH9R installed. It has 4gb memory, Core 2 Quadand a WD 640 gb drive. I have purchased another WD 640 to setup the Raid 1 array. I cannot find anyone who has installed it on a running system, they all build a new system. Can you install Rain 1 on a running system? If so how do you do it?
View 14 Replies
View Related
Apr 19, 2012
I have a setup running with 1 physical SATA disk divided in two partitions (C,D). Tomorrow i am receiving an 120GB SSD. I am planning on disconnecting the HDD and plugging the SSD with AHCI enabled in the bios and performing a clean install.I need help for the steps after that, what is going to happen when i plug in the HDD in the 2nd SATA port? Will windows boot from the SSD and see the two partitions as D & E? If this is the case can i merge the 2 partitions after that and not lose any data? The purpose as you can see is to install fresh Win 7 on the SSD and plug in the HDD after that for storage purposes only but want 1 partition to it.
View 10 Replies
View Related
Feb 21, 2013
I've been having some issues with a computer that belongs to CEO of the company I work for. It was built by his son in law and that son in law doesn't really have time to work on it anymore so fortunately "end of sarcasm" that responsibility falls on me.Computer was running great until about two or three months ago where after shutting it down for the night and turning it back on in the morning would cause the computer to reboot three times after going through POST and during 4th time he was able to boot into OS (WIN7 64bit). I updated his bios and that seemed to fix the problem, BUT the computer was set in a Raid 1, but for some reason it is no longer set up that way. I see both HDD as separate HDD in "My Computer" C: & D:, both are 600GB with about 400GB of space free. How can I return them into their raid 1 configuration? MOBO is GA-X58A-UD7 Rev 2, Intel Core i7 970 cpu with 12GB DDR3 RAM Total. He has about $10,000 worth of programs on it (Electrical & Mechanical Engineer) and it would take me weeks if I had to start from scratch.
View 1 Replies
View Related
Jul 15, 2010
So I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
View 4 Replies
View Related
Aug 13, 2012
Last night after 8 hours of toil, I finally completed a clean install using a usb drive on my asus ux32vd using the brand new SSD drive I had just bought. The reason it took so long was I kept getting this error -> "Setup was unable to create a new system partition or locate an existing system partition." What I did to finally get it to install was get to the c prompt during the installation and run diskpart and make the integrated 32GB SSD 'offline' and then I selected the SSD and used the 'clean' command and left the SSD unpartitioned and raw. I had read that with SSDs on a clean install you should leave it raw and windows will install on it. And it worked. Now here's problem number 2, which feels worse than problem number 1. After installing everything went swimmingly. I started updating drivers, etc. I got to the point where I needed to do a Windows Update. There were 91 things that needed to be updated/installed. So I ran update with all 91 and that went fine until it went to restart - it wouldn't boot into windows. Instead it kept going into that startup restoration program over and over saying it couldn't fix the problem. I tried to delete the updates manually through cprompt by running dism, but this failed and I figured to hell with the hassle I'll just reinstall Windows since I know how now and then update windows one update at a time. BIG MISTAKE. I tried doing EXACTLY what I had done before - doing diskpart, offlining the integrated SSD, etc - however this time the error isn't going away. It's still saying "Setup was unable to create a new system partition or locate an existing system partition." I don't get it. I'm doing exactly what I did when I got it to work, but it's not working now. I can only surmise that the system is still recognizing the integrated SSD somehow.
View 9 Replies
View Related
Nov 21, 2012
I am having a problem with installing Windows 7 on my netbook (Novero Solana). I did a clean install (wiped out Windows 8) and when using a USB boot install of Windows 7, I encountered the following error (Disk 0 Unallocated Space): "Windows 7 install Error "Setup was unable to use existing system partition because it does not contain the required free space". The other partition on my netbook is System Reserved (Disk 0 Partition 1: System Reserved), but I don't want to touch it, as I have heard it contains important files e.g. bootup. Attached is the screenshot of the "Install Windows" screen displaying the partitions.
View 2 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jun 8, 2011
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies
View Related
Dec 18, 2010
I have an Intel 80GB SSD (bootable OS Windows 7 installed) and a WD 500GB HDD (storage and backup). Is it possible to mirror my SSD onto an 80GB volume on my HDD using Windows 7's RAID1? If so, do I suffer a performance hit on my read/write speeds in Windows 7 on my SSD?
View 2 Replies
View Related
Jun 26, 2012
I'm running RAID1 with two 1tb drives. My RAID went critical and split the drives. One drive was listed as LD 2 -1. The other is listed as <single disk>. I was able to unplug either individually and boot into windows. I decided to erase one of them and planned to rebuid the array afterwards. At this point, I can see the erased HDD in BIOS and in RAID setup, but it will not boot to Window with the erased drive connected. It starts to boot into Windows, then gives a brief flash of BSOD, then reboots itself.
View 9 Replies
View Related
Mar 15, 2010
I'm currently have 1 SSD for OS and 2 HDD in RAID1 for data, all connected to the same Intel controller on my EVGA X58 3x SLI motherboard. I'm planning to re-install Windows 7 x64 Pro on the SSD. While doing this, I would also like to reformat the 2 RAIDed HDD's. What are the steps that I need in order to reformat the RAID1?
My SATA mode is set to AHCI at the moment. If I set the SATA mode to RAID and I boot to Windows, I'll get BSOD after the Windows logo screen. I'm not having Intel Matrix Storage Manager installed. The last time I did so on my current OS (also Win 7 x64 Pro), I got some weird chkdsk error, in which I was given thousands of "Replacing invalid security id with default id ..." for files on the RAIDed drive.
I'm planning to reuse the same 2 HDD's for RAID1 after the reinstallation. I've already copied the current data on the RAIDed disks to some external USB source.
View 3 Replies
View Related
May 22, 2011
I had a new computer assembled by a shop. I have I7 950 based system and has twin 1tb hardrives. I wanted to mirror the drives and files under windows, however the shop set up the drives in Raid1.(shop doesnt know what customer service is) I transferred all my files onto the drive with window home premium etc before realizing it had been instlled with Raid bios setup. I want to remove the raid format (bios) and clear the drives and reinstall the drives under windows to use one a a backup drive. I have a external drive I can use to assist and later use a a second backup drive.I understand once I clear the Raid formatting I will wipe all the info from the installed drives?Can I make a backup on my external drive and reinstall all my prgrams and files from my external drive once I do this. Also If I mirror windows 7 to my external drive can I reinstall this from my external drive to the internal drive or will it be set up as a raid format and not be of use?
View 1 Replies
View Related
Nov 19, 2010
I put two HDDs on GA P55A-UD4P motherboard in Raid1 type array (on Intel SATA Controller) and they were working fine for quite some time (2 weeks or so). One day, after Windows started up, I noticed a blue icon on Intel RST manager and it says that the array is initializing. Will it delete the data that is stored in there already ? As far as I know, initialization is needed in Raid5 type arrays, where parity needs to be calculated. Raid1 is a pure mirror so what would be the need for initialization right now with data in the array already?
View 1 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Jan 6, 2012
I'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working
View 2 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
Jan 16, 2009
When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies
View Related
Jun 2, 2012
I just brought home a new system with Windows 7 installed. Can I partition the hard drive without corrupting the OS ?
View 7 Replies
View Related
Dec 5, 2009
I have a new Win 7 PC. I have an existing two XP PC home network. The existing network successfully shares files and a printer. Integrating the new Win 7 PC into my network, I have been half successful. I have internet access through the existing router on all three PCs and I have printer access on all three PCs since moving the printer to the Win 7 machine. Both XPs can see the Win 7 machine on the network.
This is where things go off the rails for me though. The Win 7 machine cannot see anything in its network except itself and the router. Keep in mind that certain apps can see back and forth. Windows Easy Transfer was able to see my XP machine from the Win 7 machine and move all my files over just fine. Norton NIS 2009 can see all 3 PCs from all 3 PCs and interact with each perfectly fine.
Likewise, the XP PCs aren't quite there yet either. They alternate between having 100% access to the Win 7 public USERS share and having no access at all - with no changes being made to the setting. Currently it is not accessible and I might not have permission to use this network resource. Interestingly with the XP to Win 7 connection fails, it fails on both XP computers at the same time. Either both work just fine or neither works at all.
All three PCs are in the same workgroup. All three have the same user account names and passwords. In Win 7, Network discovery is on along with all the other Advance Network Sharing features. I am currently sharing the Win 7 shares with Everyone. I have tried shutting the firewall off and leaving it on. All three are set at Full Trust for NIS 2009.
View 9 Replies
View Related
Jul 14, 2011
Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
View 9 Replies
View Related
Feb 4, 2012
Have main computer win 7 and works fine with virgin hub. Have aquired second computer running xp pro and won't set up with hub. Keeps trying dial up and failing to recognise connection to hub.
View 4 Replies
View Related
May 13, 2011
Is there any way to create a shortcut to a non-existing target? create a new shortcut and in the "Target" field I enter a path to a non-existing target, then when I press 'OK' I get an error. The target cannot be found (of course). Is there any way to override this or solve it any other way. Anyone?
View 2 Replies
View Related
Apr 23, 2012
I have my pc set up with an SSD and a 1TB hard drive. I recently had a power outage which corrupted Bootmgr on SSD so I had to reinstall Windows 7. I had all users and programs set up under the 1TB hard drive since I just used the SSD as a boot drive. I still have my old user folder on the 1TB hard drive. Is there a way to create a new user on this new installation of Windows and link it back to my old user folder on the 1TB hard drive? I've already tried going under Registry: HKey_Local_Machine in the ProfileList and manually changing the ProfileImagePath for a new user account. But, it just caused the system to use a temporary account when logged in. It never used the path I wanted it too.
View 1 Replies
View Related
May 27, 2011
i am re-installing WIN-7 on a previously installed WIN-7 (the same OS). But the prob is that, i had installed it with XP already loaded. Now that i want to re install WIN-7,
1. will it affect XP
2.Should i reinstall XP??
3. I want XP to be as it is..
View 3 Replies
View Related
Nov 4, 2011
I installed a recent (2012) game yesterday on windows 7 64-bit and when it finished it had a checkbox "Install DirectX". I clicked it and it showed progress installing but some of the files had the directx9_ description. That seemed bizarre because windows 7 already have the latest directx 11 version. Opening dxdiag it showed version directx 11. Is there any way i can re-install the latest version or that installer didn't change anything? Should i do a system restore prior to that installation or am i ok and have the latest version of directx? I want to have directx11 support in most of my games.
View 5 Replies
View Related
May 2, 2012
how to add a new computer to an existing wireless internet
View 2 Replies
View Related
Dec 22, 2012
I recently bought a canon 7D which works perfectly with my laptop, however my existing G6 will not work with windows7 no matter what i download. I have downloaded updates to software and the latest codec but to no avail.
View 1 Replies
View Related
Dec 24, 2012
I just got a new MB/CPU and want to do a clean install of my OS. Currently I have two partitions on my HD, one for the OS and one for all my data. Can I just format the OS partition and do a clean install on that partition of the new OS? I just don't want to lose all my data files. I have most backed up, but would take the entire day to backup the rest probably.
View 2 Replies
View Related
Dec 16, 2011
I have a friend who has spyware on their computer. It's a Vista machine that's so far gone that the only option would be to wipe it (unless someone else has a better solution).
But I have a copy of Win7 Pro from Newegg that's been used already for a computer build I did.
But, could I use this disk alongside a student license code for Win7 Pro?
View 2 Replies
View Related
