Is there any way to create a shortcut to a non-existing target? create a new shortcut and in the "Target" field I enter a path to a non-existing target, then when I press 'OK' I get an error. The target cannot be found (of course). Is there any way to override this or solve it any other way. Anyone?
View 2 Replies
Recently noticed that I don't have a target field on my Shortcut properties menu.Haven't really needed it until recently for a few games. This is just one of many issues I've been coming across recently. Windows 7 Ultimate 64-Bit, if that's
View 2 Replies View RelatedI want to set Windows 7 Home Premium x64 to open PowerPoint files in PowerPoint Viewer rather than OpenOffice (the current default program), but I can't find the location of the PowerPoint Viewer program file.
With a user administratior account, when I open a properties window for the shortcut icon and and go to the Shortcut tab, in the Target box there is no path to the target file. The target is said to be simply, "Microsoft Office PowerPoint Viewer 2007 (English)". Ditto for all other shortcuts to Microsoft Office programs.
Shortcuts for other programs however (e.g. Calculator, Paint, OpenOffice, etc.) all display a pathname in the target box.
I was wondering if it was possible to modify one of the Windows shortcuts that comes with the program. I haven't been able to find a good answer yet. Basically I just wanted to switch the commands ctrl+N and ctrl+shift+N in Explorer. Is this possible
View 1 Replies View RelatedMy SSD for my OS is only 60GB and I have around 200MB space left on it, and I would like to redirect my AppData to a second SSD because it is nearly 6GB and the biggest folder.
View 1 Replies View RelatedIve got windows 7 installed on my 60 GB SSD as well as Battle Field 3. Right now my 60 GB SSD is full (0.9) free GB because of all these updates from windows. Just installed a seperate 320gb hdd, is there any way to designate the updates to download and install on this drive? BF3 new map pack comes tomorrow/tonight and I dont want to be limited by running the map pack off of the hdd, if that is even possible.
View 5 Replies View RelatedI am downloading audiobook files from England onto a single-user system running Windows 7, 64-bit system and using Internet Explorer 9. When I do a "Save Target As" function to download a file, the source file is often much larger in Mb than the way it is when it becomes saved onto my computer. For ex:, the source file might be 41mb and the way I get it is perhaps 1900kb. WHY are the source and target so different? Also, how do I get my files to show as Mb as the Target ones do instead of being in kb?
View 3 Replies View RelatedI' trying to create an image of my SSD disk on a network Hard disk. The targeted disk as 1.2 TO free space and the image is 9.2 GB
The imaging process is stopped with a message that I don't have enough spaces on the targeted disk while I got more than I need.
- Is it a good manner to create an image on a network disk? If not how should I do it.
I have a notebook running Windows 7 Professional, and it's set to back up via network to an external drive which is connected to a desktop running Home Premium.
On the notebook, when I'm selecting the backup target, it lets me choose a specific folder on the external drive. However, when I'm backing up the desktop directly to the external drive, the only choice is the root of the external drive.
I'd like to specify a folder into which the desktop can back up instead. Can this be done, or am I going to have to pop for another Professional anytime upgrade?
I want to move the My Documents onto a separate partition, which appears very straightforward in 7.
However, the first time I called the partition (as that was all it was going to be used for) 'My Documents' and just wanted to move the sub folders there.
Unfortunately, having moved the first item 'Desktop', the partition itself became 'Desktop' and behaved like that folder. The only way I could get it back was by creating other users and deleting the initial profile.
Subsequenty, every time I try to move 'My Documents', the folder selected is renamed by Windows to whatever folder I'm moving and the path afterwards reflects that, irrespective of my instruction.
i.e. I want to move 'My Documents' so create a folder called 'Information' (either before or during the move dialogue makes no difference. I confirm the notification to move files and receive confirmation of success.
Bizarrely, the new folder, previously 'Information', is now called 'My Documents'.
How to Change the Windows 7 Pinned Windows Explorer Taskbar Icon Open To Target ?
View 0 Replies View Relatedi downloaded a video file and when I checked the folder it was downloaded to it was not there. I then used windows explorer to locate the file and it found it. However, I got this error message "this shortcut refers to has been changed or moved, so this shorcut will no longer work properly."
View 8 Replies View RelatedI often have to create Shortcuts to executable code. I used Shortcut Extension - Remove or Restore to get Code: SED.exe instead of the Windows 7 default Code: SED.exe - Shortcut as name of the newly created shortcut.
But I would prefer to have just 'SED'. Any way to do this automatically?
I think it might matter that I do not hide extensions ['Hide extensions for known files' (Option in Explorer -> Tools -> Folder Options... -> View)].
I have a fresh install of win 7 64 bit Home Premium. When I right click on a shortcut and open its properties dialog, the only tabs i get are "General", "Compatibility", "Security", "Details", and "Previous Versions", but no "Shortcut" tab. I have searched the Web and there are very few instances of this problem and no solution. I have tried everything I can think of with no success.
View 7 Replies View RelatedI just brought home a new system with Windows 7 installed. Can I partition the hard drive without corrupting the OS ?
View 7 Replies View RelatedI have a new Win 7 PC. I have an existing two XP PC home network. The existing network successfully shares files and a printer. Integrating the new Win 7 PC into my network, I have been half successful. I have internet access through the existing router on all three PCs and I have printer access on all three PCs since moving the printer to the Win 7 machine. Both XPs can see the Win 7 machine on the network.
This is where things go off the rails for me though. The Win 7 machine cannot see anything in its network except itself and the router. Keep in mind that certain apps can see back and forth. Windows Easy Transfer was able to see my XP machine from the Win 7 machine and move all my files over just fine. Norton NIS 2009 can see all 3 PCs from all 3 PCs and interact with each perfectly fine.
Likewise, the XP PCs aren't quite there yet either. They alternate between having 100% access to the Win 7 public USERS share and having no access at all - with no changes being made to the setting. Currently it is not accessible and I might not have permission to use this network resource. Interestingly with the XP to Win 7 connection fails, it fails on both XP computers at the same time. Either both work just fine or neither works at all.
All three PCs are in the same workgroup. All three have the same user account names and passwords. In Win 7, Network discovery is on along with all the other Advance Network Sharing features. I am currently sharing the Win 7 shares with Everyone. I have tried shutting the firewall off and leaving it on. All three are set at Full Trust for NIS 2009.
Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
View 9 Replies View RelatedHave main computer win 7 and works fine with virgin hub. Have aquired second computer running xp pro and won't set up with hub. Keeps trying dial up and failing to recognise connection to hub.
View 4 Replies View RelatedI built my PC(Window 7 64 bit pro) year and an half ago with SSD, but now i planning to start my business, i am thinking to put to get two new SSDs on my pc to set up as RAID 1 (if i remember correctly, it help to store data in case one die)thinking to get Intel, but i hear some bad thing regarding to Intel with sandforce SSD, can someone point what is going to effect my pc?is it possible to clone my ext'g SSD with the OS to new RAID SSDs, then use the old SSD for minor storage, so my PC will never have problem with the SSD(if it does i just replace one of them) which software should i use for clone and how do i set up the RAID 1 if i do it.
View 3 Replies View RelatedI have my pc set up with an SSD and a 1TB hard drive. I recently had a power outage which corrupted Bootmgr on SSD so I had to reinstall Windows 7. I had all users and programs set up under the 1TB hard drive since I just used the SSD as a boot drive. I still have my old user folder on the 1TB hard drive. Is there a way to create a new user on this new installation of Windows and link it back to my old user folder on the 1TB hard drive? I've already tried going under Registry: HKey_Local_Machine in the ProfileList and manually changing the ProfileImagePath for a new user account. But, it just caused the system to use a temporary account when logged in. It never used the path I wanted it too.
View 1 Replies View Relatedi am re-installing WIN-7 on a previously installed WIN-7 (the same OS). But the prob is that, i had installed it with XP already loaded. Now that i want to re install WIN-7,
1. will it affect XP
2.Should i reinstall XP??
3. I want XP to be as it is..
I installed a recent (2012) game yesterday on windows 7 64-bit and when it finished it had a checkbox "Install DirectX". I clicked it and it showed progress installing but some of the files had the directx9_ description. That seemed bizarre because windows 7 already have the latest directx 11 version. Opening dxdiag it showed version directx 11. Is there any way i can re-install the latest version or that installer didn't change anything? Should i do a system restore prior to that installation or am i ok and have the latest version of directx? I want to have directx11 support in most of my games.
View 5 Replies View Relatedhow to add a new computer to an existing wireless internet
View 2 Replies View RelatedI recently bought a canon 7D which works perfectly with my laptop, however my existing G6 will not work with windows7 no matter what i download. I have downloaded updates to software and the latest codec but to no avail.
View 1 Replies View RelatedI just got a new MB/CPU and want to do a clean install of my OS. Currently I have two partitions on my HD, one for the OS and one for all my data. Can I just format the OS partition and do a clean install on that partition of the new OS? I just don't want to lose all my data files. I have most backed up, but would take the entire day to backup the rest probably.
View 2 Replies View RelatedI have a friend who has spyware on their computer. It's a Vista machine that's so far gone that the only option would be to wipe it (unless someone else has a better solution).
But I have a copy of Win7 Pro from Newegg that's been used already for a computer build I did.
But, could I use this disk alongside a student license code for Win7 Pro?
This is so weird. I created an image backup for drive C and F.After completion of the backup I got the following explanation in the error log. Backup encountered a problem while backing up file F:Prior 2010Orig Music. ErrorThe system cannot find the path specified. (0x80070003)That directory does not exist anymore. How can the backup look for a non existing directory? How do I get rid of this for the next backup?
View 1 Replies View RelatedI have a program called BigJig, which has jigsaw files (.jg6) and my saved completed/part-done jigsaws (.sv8) files. When I had XP I always saved the .sv8 to the same folder the .jg6 was in.. Then Vista started dumping them somewhere else, despite the fact that I would tell BigJig to save to the folder I wanted them in. I finally found them.. I think they were in some user profile in application data or something. Should have moved them then, but I didn't. Well, now that I've upgraded to 7, they re back to sving where I want them, but I cannot find the ones Vista dumped in the wrong place anywhere.. search does not find any of the files, neither the .jg6 nor the .sv8, even though they are there, I can see them inBigJig, open them, mess with them etc. But some of them are in the wrong folders, and so, because I can't find them, I can't move them to where I want them to be.. if that makes sense. BigJig doesn't have a 'save as' option, so I can't save them to the right place and delete the wrong one.. I need to move them in windows explorer or my computer, but until i can find them I can't fix their locations. How can I find the actual location of these files?
View 5 Replies View RelatedI cannot copy a file and replace an exiting file:No messages, not even "file exists"; this includes drags and copy/paste.Get "file exists" on "Save As.On "Cut" "Error 0x80070490: Element not found"I have to physically delete the file and paste the new one. This is not a protection problem, it is just a simple text file that I created for the test in 2 different folders. This is the first time I have ever seen this including Win 3.1.
View 3 Replies View RelatedI had just fully patched yesterday btw, before this occurred.
I created a folder on my desktop, say it was called "temp". I dragged some files into it. I created another folder on my desktop, and named it "whatever". The previous folder, "temp" now renamed itself "whatever (1)" (might have ended in (2), whatever convention Windows uses for auto-renaming)
So I renamed the original folder to "temp".
Likewise when I added a third folder bearing a different name, the first two that I had created this session were auto-renamed to become copies of my new folder name, with number suffixes on them.
I am planning to replace my motherboard and memory on my Win 7 Home premium 64b. I've been updating MBs for 25 years and now I am getting conflicting answers regarding booting existing hard drive on new MB. My present Win 7 installation was installed on my present MB. Before I have always been able to use an existing hard drive and OS on a new MB.Now when I asked Gigabyte if a reinstall would be required they said no, but the registry may be full of unneeded drivers etc which would affect performance. This seems a solvable issue using registry cleaners and editors.But I am also getting opinions that Win 7 will not boot up on a new MB and reinstall OS would be required. Considering the number of programs, some on disks others from downloads. activation keys etc, this is a major problem.
View 9 Replies View Related
