I' trying to create an image of my SSD disk on a network Hard disk. The targeted disk as 1.2 TO free space and the image is 9.2 GB
The imaging process is stopped with a message that I don't have enough spaces on the targeted disk while I got more than I need.
- Is it a good manner to create an image on a network disk? If not how should I do it.
Is it big and if it is can i save it on a 16gb usb flash drive?
View 9 Replies View RelatedYesterday I tried making partitions in my hard disk, and I failed Here's what I did:
1. run compmgmt.msc
2. Shrink C: drive
3. my hard disk' capacity shrunk from 451GB to 260GB
4. an error window appeared ("I/O device error" I think)
5. it left me no unallocated space to create partition
using compmgmt I can't extend my hdd back to 451GB, so I used MiniTool partition wizard to restore it (btw, shrinking with MT PartitionWiz resulted the same, no unallocated space)
I have just currently installed 1 x 2 TB HDD. Installed Windows 7 64 bit on one. After installing all my basic applications I then decided to create a backup on my spare 1TB allocating 50 gig for the image. The image itself is only 35gig but when I click on create image it runs for a little while then displays the following message:
"There is not enough disk space to create the volume shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. For volumes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)". It seem like the OS does not recognise 1TB hdd
I am not able to make backup, I get message not enough free space for shadow copy? How do I resolve this? I understand some kind of USN journal is created on System reserved partion. This hidden partition was created when I installed and now I have only 38Mb free out of 100Mb. As I understand this has been an Issue for more than a year, and still Microsoft has not resolved?
View 4 Replies View RelatedI'm belatedly trying to create my first system recovery backup, on a system which I first installed Windows back in November 2011.I have a 1TB drive with a 214GB partition that I set up for a backup. I manually store all my media and pictures to both a separate partition on the drive, in the cloud, and on a separate external HDD, so all I really want to back up is the system image.This is the newbie sounding question to confirm my suspicions: The system drive I'm trying to back up is definitely bigger than the partition I've set aside for recovery. My C drive is a 473GB partition, and I'm using maybe a bit more than half of that currently. If this is the case, is there a way to reallocate un-used disk space from my other partitions to make the recovery partition larger, or should I be biting the bullet and shelling out for a 500GB external to cover my system recovery needs?
View 3 Replies View RelatedI have Windows 7, 64 Bit. It is on HDD. In May I will buy 128 gig SSD. How can I move Windows 7 to SSD as well as some other programs effectively? What is the procedure? Also if I want to leave desktop, My Documents, and all other folders on my hard drive, will it be possible. So basically what I am asking is, what will be moved with Windows. Also, I tried twice to backup Windows 7 image, and it failed both times, while I had more than enough space on my external drive.
View 2 Replies View RelatedI have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies View RelatedIn preparation for sending my laptop to HP for a hinge replacement, I decided to backup all my data (via System Image). My plan was to then perform a Minimized Image Recovery: so as to wipe off all my data, but still keep the computer running nicely.The attempt to wipe my data failed.Whenever I try to boot my computer now, I am presented with "Windows Boot Manager" [see attached image]I don't have an OS disk.
View 2 Replies View RelatedI have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies View RelatedI was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies View RelatedI recently built a windows 7 home premium PC with an Intel 160 GB SSD as (C) for OS/programs and second 1TB HDD as (D) for data and backups. I also have a DVD burner (H). They are all SATA drives running in AHCI mode. Immediately after installing just windows, I used the windows backup feature to successfully create a system image to a local disk (D) which was and still is nearly empty. The next day, after installing drivers, updates, and a few programs, I went to create a second system image but this time it failed. The process started as it should have but halfway through it failed with the following message:
"The backup failed"
"The device is not connected (0x8007048f)"
At that point, after exiting the program, the D drive does not show up on my computer. Upon rebooting the D drive reappears. I searched the web and found some references to checking whether volume shadow copying services and their dependent services were working and that didn't work. Another reference said to try updating to a newer bios as some have bugs that screw up the enumerator for the drive order. The BIOS I use is the latest and wasn't changed since my first successful attempt at creating the system image.
Windows 7 Home Premium
Gigabyte GA-P55A-UD4 Bios 6 (latest)
Intel 160 GB SSD (C) OS
1 TB HDD (D)
Raedon 5770
4 GB DDR3 RAM
I have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
My PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
Is there any way to create a shortcut to a non-existing target? create a new shortcut and in the "Target" field I enter a path to a non-existing target, then when I press 'OK' I get an error. The target cannot be found (of course). Is there any way to override this or solve it any other way. Anyone?
View 2 Replies View RelatedMy SSD for my OS is only 60GB and I have around 200MB space left on it, and I would like to redirect my AppData to a second SSD because it is nearly 6GB and the biggest folder.
View 1 Replies View RelatedIve got windows 7 installed on my 60 GB SSD as well as Battle Field 3. Right now my 60 GB SSD is full (0.9) free GB because of all these updates from windows. Just installed a seperate 320gb hdd, is there any way to designate the updates to download and install on this drive? BF3 new map pack comes tomorrow/tonight and I dont want to be limited by running the map pack off of the hdd, if that is even possible.
View 5 Replies View RelatedI am downloading audiobook files from England onto a single-user system running Windows 7, 64-bit system and using Internet Explorer 9. When I do a "Save Target As" function to download a file, the source file is often much larger in Mb than the way it is when it becomes saved onto my computer. For ex:, the source file might be 41mb and the way I get it is perhaps 1900kb. WHY are the source and target so different? Also, how do I get my files to show as Mb as the Target ones do instead of being in kb?
View 3 Replies View RelatedI have a notebook running Windows 7 Professional, and it's set to back up via network to an external drive which is connected to a desktop running Home Premium.
On the notebook, when I'm selecting the backup target, it lets me choose a specific folder on the external drive. However, when I'm backing up the desktop directly to the external drive, the only choice is the root of the external drive.
I'd like to specify a folder into which the desktop can back up instead. Can this be done, or am I going to have to pop for another Professional anytime upgrade?
I want to move the My Documents onto a separate partition, which appears very straightforward in 7.
However, the first time I called the partition (as that was all it was going to be used for) 'My Documents' and just wanted to move the sub folders there.
Unfortunately, having moved the first item 'Desktop', the partition itself became 'Desktop' and behaved like that folder. The only way I could get it back was by creating other users and deleting the initial profile.
Subsequenty, every time I try to move 'My Documents', the folder selected is renamed by Windows to whatever folder I'm moving and the path afterwards reflects that, irrespective of my instruction.
i.e. I want to move 'My Documents' so create a folder called 'Information' (either before or during the move dialogue makes no difference. I confirm the notification to move files and receive confirmation of success.
Bizarrely, the new folder, previously 'Information', is now called 'My Documents'.
Recently noticed that I don't have a target field on my Shortcut properties menu.Haven't really needed it until recently for a few games. This is just one of many issues I've been coming across recently. Windows 7 Ultimate 64-Bit, if that's
View 2 Replies View RelatedI want to set Windows 7 Home Premium x64 to open PowerPoint files in PowerPoint Viewer rather than OpenOffice (the current default program), but I can't find the location of the PowerPoint Viewer program file.
With a user administratior account, when I open a properties window for the shortcut icon and and go to the Shortcut tab, in the Target box there is no path to the target file. The target is said to be simply, "Microsoft Office PowerPoint Viewer 2007 (English)". Ditto for all other shortcuts to Microsoft Office programs.
Shortcuts for other programs however (e.g. Calculator, Paint, OpenOffice, etc.) all display a pathname in the target box.
How to Change the Windows 7 Pinned Windows Explorer Taskbar Icon Open To Target ?
View 0 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I just allocated more space to my system restore to ensure that when i back up files/docs there will be sufficient space. But does the allocated space for system restore affect at all how much space is allocated for backup? If not, i will would like to turn back down the allocated space for the restore.
Windows 7 Home Premium 64 bit
Service Pack 1
Computer is ASUS laptop
4 gb of ram
64 bit system
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View RelatedWith either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image
View 2 Replies View RelatedI am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
View 5 Replies View Related
