Using Recovery Manager To Reset Laptop - Image Failed To Copy Across
Nov 3, 2012
I was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies
ADVERTISEMENT
Sep 4, 2012
In preparation for sending my laptop to HP for a hinge replacement, I decided to backup all my data (via System Image). My plan was to then perform a Minimized Image Recovery: so as to wipe off all my data, but still keep the computer running nicely.The attempt to wipe my data failed.Whenever I try to boot my computer now, I am presented with "Windows Boot Manager" [see attached image]I don't have an OS disk.
View 2 Replies
View Related
Feb 20, 2012
I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
View 3 Replies
View Related
Jan 7, 2012
Is there a quicker way to copy image? MS instructions is causing my dvd drive errors when I'm copying image to cd disk. MS istructions are giving you two ways to copy your HD image. Both sets of options are showing media too small error and when I go and check if anything is showing copied image nothing is on that disk. I'm using cd-r 700 mb disks from Best Buy.
View 10 Replies
View Related
Nov 10, 2011
i have an acer laptop and i need recovery disc to start it up again--can i use recovery discs from a toshiba and do the same?
View 4 Replies
View Related
Jun 26, 2012
is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
View 4 Replies
View Related
Aug 11, 2011
I have a Windows 7 64bit system with a failed motherboard. A replacement of the same model of motherboard is no longer sold so I had to get a new motherboard.With the new motherboard, I assume I should start with a clean install of Windows. Is that the best way? Will trying to boot my existing Windows 7 64 hard drive in a system with a new motherboard possible? Maybe I could boot into safe mode and install drivers for the new motherboard? (The new motherboard has a different chipset. I am coming from a P35 chipset to a G41 chipset.)If I can't boot my old hard drive on my new motherboard, is there software available that will copy the accounts and settings and registry entries from my old boot drive to a new boot drive?
View 1 Replies
View Related
Apr 23, 2012
I have Windows 7, 64 Bit. It is on HDD. In May I will buy 128 gig SSD. How can I move Windows 7 to SSD as well as some other programs effectively? What is the procedure? Also if I want to leave desktop, My Documents, and all other folders on my hard drive, will it be possible. So basically what I am asking is, what will be moved with Windows. Also, I tried twice to backup Windows 7 image, and it failed both times, while I had more than enough space on my external drive.
View 2 Replies
View Related
Nov 12, 2011
I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies
View Related
Sep 9, 2012
I' trying to create an image of my SSD disk on a network Hard disk. The targeted disk as 1.2 TO free space and the image is 9.2 GB
The imaging process is stopped with a message that I don't have enough spaces on the targeted disk while I got more than I need.
- Is it a good manner to create an image on a network disk? If not how should I do it.
View 3 Replies
View Related
Feb 22, 2011
I have some pictures in my computer that I had too in my external hd as a backup. Last time I just formatted my PC and restored the backup from the external HD. I had a batch file script that automated both backup and restore process, so I could just let it working overnight. The big problem is that I needed to format the external, but after doing this, I realized that some installers that I had restored was corrupted, like some videos and other files. Then I checked the pictures, and lots of them are damaged. I can open the files, but some have distortions, or colors are messed up. I tried to defrag the drive, tried pixrecovery to restore the picture, but no way, they're still damaged. I want to know if anyone have any idea for me. Really important pictures to me are damaged now..
View 6 Replies
View Related
Nov 1, 2009
I have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
View 3 Replies
View Related
May 4, 2011
I have an external enclosure. Could anyone point to me where to go and read in point blank detail step by step how to:
1. Make a mirror image backup copy of the pc hard drive including partitions and the OS..
2. How to set it in such a way that I could save the eventual changes produced in that backed up copy by doing in future just an incremental back up each time (of only what has changed since the previous backup).I am running Windows 7 Home 64-bit.
View 3 Replies
View Related
Jan 13, 2012
have beeen reading through this amazing forum for the past couple of days trying to get my Dell 1545 working again, i have tried to reinstall the OS from a disc that came with the lpatop, to no availi created a system restore disk from the machine i'm writing this on....still to no avail....i can get into the setup menu's but like many others i can't get any further, I don't know how to get into the BIOS menu (and to be honest wouldn't know what to do if I did
View 9 Replies
View Related
Jan 28, 2013
my HP 550 laptop is failing to boot. upon attempting to do startup repair, it gives me a root cause as "boot manager failed to find os loader".and booting from safe mode is not present despite hitting f8 at boot.
View 2 Replies
View Related
Jan 15, 2013
I have tons of processes currently running in my task manager, some are duplicates or more.How do I make a copy of everything that is currently running?
View 1 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Dec 10, 2011
How do I copy and paste an image into the body of an e-mail message.?
View 1 Replies
View Related
May 4, 2012
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
View 4 Replies
View Related
May 26, 2012
I am making regular backups - both the image backup and the file sets using Windows 7 Backup program. No problems with that.
But, I periodically would like to copy the image backup to a portable drive. I plan to take this portable drive offsite to a secure location - I call it my archive.
Is this possible? What files must I copy? Do I have to maintain a certain directory structure or naming convention in case I have to use the archived copy to restore (assume a bare metal restoration)?
I thought I could just copy the VHD files (boot and system) but the image backup has other directories and files and I just don't understand their purpose.
I need to copy these files rather than running the backup over again to this portable archive device. I have multiple computers and it is impractical for me to physically access each computer to re-run an image backup to the same archive device.
My archive device is a regular USB/eSata HDD and I don't plan to put VSS on it.
View 4 Replies
View Related
Nov 24, 2012
A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies
View Related
Apr 16, 2009
How to Do a System Image Recovery in Windows 7 ?
View 0 Replies
View Related
Jan 9, 2010
I recently built a windows 7 home premium PC with an Intel 160 GB SSD as (C) for OS/programs and second 1TB HDD as (D) for data and backups. I also have a DVD burner (H). They are all SATA drives running in AHCI mode. Immediately after installing just windows, I used the windows backup feature to successfully create a system image to a local disk (D) which was and still is nearly empty. The next day, after installing drivers, updates, and a few programs, I went to create a second system image but this time it failed. The process started as it should have but halfway through it failed with the following message:
"The backup failed"
"The device is not connected (0x8007048f)"
At that point, after exiting the program, the D drive does not show up on my computer. Upon rebooting the D drive reappears. I searched the web and found some references to checking whether volume shadow copying services and their dependent services were working and that didn't work. Another reference said to try updating to a newer bios as some have bugs that screw up the enumerator for the drive order. The BIOS I use is the latest and wasn't changed since my first successful attempt at creating the system image.
Windows 7 Home Premium
Gigabyte GA-P55A-UD4 Bios 6 (latest)
Intel 160 GB SSD (C) OS
1 TB HDD (D)
Raedon 5770
4 GB DDR3 RAM
View 3 Replies
View Related
Nov 4, 2011
I am not able to make backup, I get message not enough free space for shadow copy? How do I resolve this? I understand some kind of USN journal is created on System reserved partion. This hidden partition was created when I installed and now I have only 38Mb free out of 100Mb. As I understand this has been an Issue for more than a year, and still Microsoft has not resolved?
View 4 Replies
View Related
May 14, 2012
I am preparing for MCTS 70-680 (Win 7 configuration exam) for doing labs I am using VMware workstation 7. Every thing is going OK but when I try to copy the created image wim file to destination computer. On that particular destination computer I cannot access the e: drive in which I have the Windows PE (pre environment) disk.
The command I use is like that :
x:e:imagex.exe /apply f:capturedimage.wim 1 c:
I got error the system cannot find the drive specified.
View 1 Replies
View Related
Nov 21, 2012
I had a dual boot with Windows 7 and Win8. I wanted to remove Win8 cause I was bored and didn't need it. I did everything right.
Dual Boot - Delete OS
But the boot manager failed. When I restarted I got an error saying that their is some invalid information. I didn't have the Win 7 disc, so I put the Win 8 disc and installed it in the partition that had win 8 before, hoping that it would recognized Win 7. But hasn't. So now I have a partition of Win 7 but it is not getting recognized.
View 1 Replies
View Related
Apr 26, 2012
Basically what happened was I deleted the factory partitions on this laptop( HP Pavilion G6) using disk management down to two partitions and attempted to install Ubuntu on the other partition.After a horrendously failed attempt to install Ubuntu, disk management will not recognize my hard drive even though I can see it and access it through windows. I just want to re-partition it so I can set up a recovery partition.It wouldn't boot up after the failed install, saying I had no operating system, but I used a Windows 7 repair disc and now it boots up fine, but disk management doesn't show my hd or any partitions.
View 3 Replies
View Related
Apr 18, 2012
I have a Toshiba Satellite with a badly damaged windows installation. I want to do a complete re-install but cant start the recovery image from the Windows 7 repair my computer option. I can however access the recovery image from the partition and have copied it to an external USB hard drive. Can anyone tell me how I can start the re-install from the recovery image now on the USB external HD. Can I somehow create some re-install DVDs from this recovery image?
View 4 Replies
View Related
Feb 22, 2013
I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
View 4 Replies
View Related
Oct 15, 2011
I use a dual boot system win 7 ultimate and xp sp3.now win 7 does not boot but can log on to xp. I did not create a system recovery image of win 7 and turned off system restore. Ihave no installation disk. So my only option is to create a system recovery image from xp.
View 4 Replies
View Related
May 9, 2012
I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies
View Related
