VMware Workstation 7 - Cannot Copy Created Image File To Drive Specified
May 14, 2012
I am preparing for MCTS 70-680 (Win 7 configuration exam) for doing labs I am using VMware workstation 7. Every thing is going OK but when I try to copy the created image wim file to destination computer. On that particular destination computer I cannot access the e: drive in which I have the Windows PE (pre environment) disk.
The command I use is like that :
x:e:imagex.exe /apply f:capturedimage.wim 1 c:
I got error the system cannot find the drive specified.
View 1 Replies
ADVERTISEMENT
Oct 23, 2012
I am trying to deliberately set a different date in my guest os to that of my host os. My host is Windows 7 (x64), my guest is XP (SP3), and my virtualization software is VMware Workstation (7). In an attempt to set this up I have done the following -
1). Added a line to the VMX file
2). Booted into and modified the BIOS settings of the guest XP os (setting the date back in time to the 08/08/2008) -
3). Disabled the guest XP os internet time synchronization settings -
When I first boot into the XP guest I see the following date - However after about 2 - 5 seconds the date is restored to that on the Host - how to set a different guest os date / time.
View 2 Replies
View Related
Oct 4, 2012
how to enable the usb device both windows and VMware workstation environment?i am used Linux in VMware as a same time also used windows in normal environment..i need to use my pen drive in both environment but i couldn't find USB in windows if it is running on linux and other-way round also happen.
View 2 Replies
View Related
Apr 7, 2012
We have a Windows 7 Host running VMware Workstation with 5 virtual machines, One Windows server, 2 Windows 7 machines and 2 Windows XP machines.The host and non server VM's are fine, they run 100% of the time and never have problems, my SBS 2011 VM is another story. There have been nothing but crashe's over the past 6 months and they are fairly random.I beleive the server BSOD's and then it reboots, upon rebooting it just sits at a black loading windows screen forever until you completely power it off and then back on, at which time it boots up normally.The BSOD's happen ususaly around 12 AM when Windows server backup runs and creates a server backup on another server over the network, the backup runs 7 days a week but we only see the BSOD about twice a month.I have run through drivers in my SBS 2011 install and all seem up to date to me.
View 5 Replies
View Related
Oct 29, 2012
Office Starter Click To Run created a protected Q drive with it's file in it when I uninstalled it and I can't unprotect it even though I'm the administrator. how I can unprotect this and get rid of it?
View 1 Replies
View Related
Apr 4, 2011
For those who want to try out SUSE LINUX 11.4 (KDE version) without hassle of install etc then you can download a vmware version with a lot of apps already installed.The link also gives a few other Linux distro choices. These should also work with VMPLAYER too if you don't have vmware workstation.VMware image and appliance download Use the Bittorrent download to keep the server load bandwidth down -- BTW this is a 100% TOTALLY LEGAL and GOOD use of Bittorrent - all torrents aren't illegal / pirated software. Loads of linux distros are supplied this way as well.(Hope not against Forum rules - but I do know lots of people have an interest in trying out / learning Linux and by running as a VM on Windows seems to me an EXCELLENT way of not only learning about Linux but also discovering the great use of Virtual Machines too).
View 2 Replies
View Related
Dec 24, 2011
it says access denied whenever i try to copy any file on my f drive.
View 4 Replies
View Related
Mar 27, 2012
I have a laptop sony vaio y series without cd/dvd drive. my questin is i want to make my window 7 image file.
View 2 Replies
View Related
Feb 2, 2012
i am unable to copy any file from comp. to pen drive
View 2 Replies
View Related
Nov 2, 2012
Trying to restore a Windows 7 image after a boot manager problem. Rampage IV Formula MB with no hardware or BIOS changes since the creation of the image 9 days ago, but get the following error message.
"The system image restore failed. Windows cannot restore a system image to a computer that has different firmware. The system image was created on a Computer using EFI and this computer is using BIOS."
I thought this MB used EFI.
View 2 Replies
View Related
May 29, 2012
I have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
View 1 Replies
View Related
Jul 20, 2012
When i power On Vmware Windows 7 The file specified is not a virtual disk. I get this error The file specified is not a virtual disk.
View 2 Replies
View Related
Jan 20, 2012
I mapped a drive from the server to my workstation. Then I created a shortcut to the exe file. When I launch it, it tells me the file cant be located. I have full admin rights.
View 2 Replies
View Related
Aug 26, 2011
Is there any way to setup a computer on vmware and then make an image of the vm and put it on a physical computer (multiple computers if possible)?
View 5 Replies
View Related
Dec 4, 2011
I've tried to have a dump file generated on crash but it's not getting written. I followed the following page to set up how Windows would create my dump files:
Dump Files - Configure Windows to Create on BSOD
I had a few crashes of different types - photos attached. I also attached the zip file as per instructions from here: [URL]
View 4 Replies
View Related
May 28, 2012
Every few days , (could be 4. or 5 days) my computer rebooted by itself and I get a error code 41 kernel power, the system rebooted with properly shuttiong down. A dump file is not bering created. This started in beginning of may. Until then this never happened. This happened when windows is in low use or idle. Microsoft took control of my computer and could not find why it happens Again I am not getting a dump file to check. hard drive tesr--wiith Hdd reginator and check disk no problems?memory test no problem?cpu test by intel softeware diagnostic tool no problem and cpu is cool?test with asus al suitee and cpu temp is 32c and system temp is 31c? virus check with kaspersky and no virus
windows 7 64 bit
malibastes free software
superanitspyware free software
kaspersky internet security
i7 processor, asus motherboard,
2 teribite hard drives,850 corsair watt power supply
h50 cpu cooler, 12 gig 1600 speed balastic memory,
evga gtx460 1gb exhaust ddr 5 memory
creative xfi extreme gaamer sound card
View 1 Replies
View Related
Jun 18, 2011
I've created a slideshow file, using FastStone Image Viewer 4.3, and pictures I took myself in our back yard. The file is *.exe and self-executes correctly on my computer. I've scanned it with MSE and it's clean and virus-free.I want to send it to our daughter, using my Hotmail account, as a normal attachment to a normal email msg. But Hotmail blocks it completely since it's an executable file type.So I tried to just rename a copy of it on my hard drive, first, to *.txt. But when I select the *.exe filename and then click Rename, I can't seem to get access to the extension part of the current file name; the exe after the dot. So is there a way I can change the file type in windows from "application" to a type Hotmail so windows won't block as an email attachment? Then tell the recipient to change it back to *.exe on her end?
View 2 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
Oct 27, 2010
I have just created a batch file to backup a few things on my machine, the thing is the batch file has a menu in it and i was wondering if i was to set the batch file to run under task scheduler say once a week is there a way i can get it to excute through the menu of the batch file? if not when the task scheduler runs it, it will just stay a point waiting for me to press enter.
View 9 Replies
View Related
Feb 22, 2011
I have some pictures in my computer that I had too in my external hd as a backup. Last time I just formatted my PC and restored the backup from the external HD. I had a batch file script that automated both backup and restore process, so I could just let it working overnight. The big problem is that I needed to format the external, but after doing this, I realized that some installers that I had restored was corrupted, like some videos and other files. Then I checked the pictures, and lots of them are damaged. I can open the files, but some have distortions, or colors are messed up. I tried to defrag the drive, tried pixrecovery to restore the picture, but no way, they're still damaged. I want to know if anyone have any idea for me. Really important pictures to me are damaged now..
View 6 Replies
View Related
Sep 27, 2012
whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
View 1 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Jan 7, 2012
Is there a quicker way to copy image? MS instructions is causing my dvd drive errors when I'm copying image to cd disk. MS istructions are giving you two ways to copy your HD image. Both sets of options are showing media too small error and when I go and check if anything is showing copied image nothing is on that disk. I'm using cd-r 700 mb disks from Best Buy.
View 10 Replies
View Related
May 4, 2011
I have an external enclosure. Could anyone point to me where to go and read in point blank detail step by step how to:
1. Make a mirror image backup copy of the pc hard drive including partitions and the OS..
2. How to set it in such a way that I could save the eventual changes produced in that backed up copy by doing in future just an incremental back up each time (of only what has changed since the previous backup).I am running Windows 7 Home 64-bit.
View 3 Replies
View Related
Feb 28, 2011
Windows 7 64 bit SP1 - Clean Install. I have found an incredibly annoying problem. I have external USB drives on my laptop, both esata and USB 3. I store a lot of HD video clips that I take on them. It is very important that I set the sort order to Date Created (due to the naming convention on my camcorder). Before doing a clean install from Windows 7 64bit to Windows 7 SP1 64bit, if I changed the order in explorer it quickly changed and then remembered the sort order, so next time I went into the folder on my external drive the files were in the correct order.
Now, whenever I go into the folder it takes up to 5 minutes to sort the files (there are some 4000 files in the folder). If I go to other folder on my laptop, then back to that folder, it takes another 5 minutes to sort them again! At the moment I am tempted to go back to pre-SP1. I have taken the external drive to another laptop i have with SP1 on it, and it does the same thing. I can't wait around for windows to re-order my files whenever I go into that folder, especially as it takes such a long time.
View 1 Replies
View Related
Dec 10, 2011
How do I copy and paste an image into the body of an e-mail message.?
View 1 Replies
View Related
May 4, 2012
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
View 4 Replies
View Related
May 26, 2012
I am making regular backups - both the image backup and the file sets using Windows 7 Backup program. No problems with that.
But, I periodically would like to copy the image backup to a portable drive. I plan to take this portable drive offsite to a secure location - I call it my archive.
Is this possible? What files must I copy? Do I have to maintain a certain directory structure or naming convention in case I have to use the archived copy to restore (assume a bare metal restoration)?
I thought I could just copy the VHD files (boot and system) but the image backup has other directories and files and I just don't understand their purpose.
I need to copy these files rather than running the backup over again to this portable archive device. I have multiple computers and it is impractical for me to physically access each computer to re-run an image backup to the same archive device.
My archive device is a regular USB/eSata HDD and I don't plan to put VSS on it.
View 4 Replies
View Related
Nov 3, 2012
I was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies
View Related
Nov 4, 2011
I am not able to make backup, I get message not enough free space for shadow copy? How do I resolve this? I understand some kind of USN journal is created on System reserved partion. This hidden partition was created when I installed and now I have only 38Mb free out of 100Mb. As I understand this has been an Issue for more than a year, and still Microsoft has not resolved?
View 4 Replies
View Related
Jul 15, 2012
I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
View 2 Replies
View Related
