System Image Created Using EFI And Computer Is Using BIOS
Nov 2, 2012
Trying to restore a Windows 7 image after a boot manager problem. Rampage IV Formula MB with no hardware or BIOS changes since the creation of the image 9 days ago, but get the following error message.
"The system image restore failed. Windows cannot restore a system image to a computer that has different firmware. The system image was created on a Computer using EFI and this computer is using BIOS."
I have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
I m having 2 laptops at home, I want to create system image file of laptop1 onto laptop2. Since the data is large i cant take the hassle of creating sytem image on a DVD as it will require more DVD's to do it. So m planning to store it on Laptop2. I m thinking of connecting 2 Laptops with a LAN cable and then create the sytem image on other laptop.
By "blank" I mean an empty laptop hard drive. I'm going to have my hard drive replaced, so I believe the new hard drive won't have an operating system installed on it. So if I create a system image and store it in an external HDD, will I be able to reinstall the OS simply py plugging the external HDD into the laptop ?
I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
I am preparing for MCTS 70-680 (Win 7 configuration exam) for doing labs I am using VMware workstation 7. Every thing is going OK but when I try to copy the created image wim file to destination computer. On that particular destination computer I cannot access the e: drive in which I have the Windows PE (pre environment) disk.
The command I use is like that : x:e:imagex.exe /apply f:capturedimage.wim 1 c: I got error the system cannot find the drive specified.
I have a Dell Studio XPS 1640 and I am trying to restore it to factory settings. I have inserted the operating system disc and I get a message "cannot find a system image on this computer."
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
I had an HP 6310y Desktop (1 TB hdd) that died as well as the mobo. Luckily, I created a system image onlu 3 days prior to the crash. I have very important data on the hdd (business, wedding photos,etc). Im about to order a new PC but in the meantime, Im trying to restore the image in order to extrapolate that important data so I can burn to CD
1) I have a Samsung RV520 (640gb). I tried to restore my image over the samsung in order to do this. However, it prompted me "The system image restore failed. Windows cannot restore a system a system image to a computer that has different firmware.*The system image was created on a computer using BIOS and the computer is using EFI."
When originally installing Windows 7 Ultimate I noticed it created a 100mb system reserved partition. No probs.
Recently I turned on AHCI in my bios and attempted to do a clean install. This time WinPE did not create a reserved partition and despite creating an 80gb partition to install windows on it said “Setup was unable to create a new system partition or locate an existing system partition.”
Install refused to proceed any further, pointing me to some log files I could not find. I booted from my repair disk and tried to make the partition active, which was already marked as active and tried again. No luck.
I had deleted all partitions on the drive.
So I turned off AHCI and tried again. I missed the "press any key".. and system complained about a "Master boot record error".. I rebooted and tried to do install again. Same issue.
I was able to recover my system from an image I created earlier, but I sure would like to know why the reserved partition was not created, and why windows refused to install. Because I'm going to try again.
I have purchased a new HDD, one that is supposed to be much faster than my old one, which of course has not been formatted. I tried that drive with and without AHCI and had the sasme issues.
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
My laptop is 6 months old - sony vaio. Do I require to create System Repair Disc? I have taken back up in external hard drive. Also have created windows 7 backup in three separate DVDs.
Every time i start my system, a new folder gets created on my desktop. I delet it but next time i restart my system, it comes up again...Is this a virus. Its not affecting anything so far i know.
Every few days , (could be 4. or 5 days) my computer rebooted by itself and I get a error code 41 kernel power, the system rebooted with properly shuttiong down. A dump file is not bering created. This started in beginning of may. Until then this never happened. This happened when windows is in low use or idle. Microsoft took control of my computer and could not find why it happens Again I am not getting a dump file to check. hard drive tesr--wiith Hdd reginator and check disk no problems?memory test no problem?cpu test by intel softeware diagnostic tool no problem and cpu is cool?test with asus al suitee and cpu temp is 32c and system temp is 31c? virus check with kaspersky and no virus
windows 7 64 bit malibastes free software superanitspyware free software kaspersky internet security i7 processor, asus motherboard, 2 teribite hard drives,850 corsair watt power supply h50 cpu cooler, 12 gig 1600 speed balastic memory, evga gtx460 1gb exhaust ddr 5 memory creative xfi extreme gaamer sound card
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
So What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.
When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
I made a system image backup from my ssd,then I bought another ssd to put the system image on,I tried when the 2nd ssd was completely empty; it saysthere is no disk to recover to ( or something like that )then I installed clean version of windows on the 2nd ssdafter that I tried restoring via the system repair disc but it kept telling me the same message
i am trying to back up and create a system image but evert time i do i get this error THE SYSTEM CANNOT FIND THE FILE SPECIFIED OX87007002, i have window 7 64 bit professional i think the problem is with this system reserved partition
I recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
After my problems reported elsewhere, I decided to make a system image after I got things working. This was recommended by inference by one of the gurus who responded to my questions.So I got the system up again and I needed to learn about system images. So I hit F1 and read about creating a system image. Clicked here, clicked there, specified by external hard drive and told it to only include my system drive C:. Whir, whir, whir . . .. system image created.Now, I've cleaned the system of any possible Malware, so I want to create a new image of my system drive. So, I click here, click there and specify my external hard drive but NOW it won't let me include only drive C:, it wants to include my data drive, E:. The check box for E: is greyed out so I can't uncheck it.
I know how to perform a System Image, but now can't do so. I am using a Seagate Expansion External hard drive. Somewhere along the line there was a glitch and a red X (disconned) appeared on the drive icon in back up. I tried the same drive in an identical Windows 7 computer. Now I have red X's on both computers. The drive is fine, wiped and formatted, and the computer recognizes it. Still the red X on both computers. I can't get it off. The "start back up" tab is grayed out.
I am using 2 identical Dell Studio XPS 8000 desktop computers (wit Microsoft USB Natural Keyboards), 1TB hard drives, Windows 7, 64 bit platform) and I had no problem in the past making System Images. I have 2 separate external hard drives (1 is a 1TB Seagate Expansion External Hard Drive, the other is a 160GB hard drive.)It seems the System Image is approximately 149.GB, so will fit.I thought you had to erase the previous system image to put a new one on the same hard drive, but both computers said the drive was disconnected, and put a big red X on the drive location. Turns out I had to reformat the empty drives. I did, and the computers recognize both dries when they are connected, but the red X remains, and attempts to make a new system image fail. I am offered the "start backup" box, I can click on it, and all seems to be going well until the fill bar (green) stops about 1/6th of the way across, it stops there and j ust spins, not filling anymore, and if left long enough, it turns completely red and says the process failed.
