Cannot Enter Bios From System
Jul 20, 2012the system is windows 7 ultimate 32bits.i have tried some control keys but all did not work.
View 2 Repliesthe system is windows 7 ultimate 32bits.i have tried some control keys but all did not work.
View 2 RepliesI've changed my MOBO to Gigabyte.. for some reason, when i tried to enter into BIOS, it doesn't. I cud see "press DEL to enter setup" message... This screen is only up for two seconds before it flashes to the POST screen which then flashes into a screen that says "Loading Operating System". Then it loaded my OS.. Then i restarted my computer and tried to enter into BIOS again... This time I entered into BIOS.. Sometimes, it is not entering into BIOS (as I've pressed DEL so many times before the BIOS entry msg)..
View 9 Replies View RelatedHcl me laptop how to enter into bios
View 1 Replies View RelatedI recently got win7. However, when I press the BIOS button on startup, it goes to advanced windows setting instead of BIOS. how can i enter bios?
View 9 Replies View RelatedI have hp 4530s laptop and i think that my system has crashed. I need to reorder my boot preferences. But i cant access the boot sequence not even with f2, del, f12, f10, esc. No key is working. What do i do??
View 1 Replies View RelatedI want to format my operating system .The laptop is presently very slow.Even the windows explorer has stopped working many atimes.
View 3 Replies View RelatedI am trying to install ubuntu from a pendrive...I need to know how can I enter into BIOS in windows7 to change the boot order.
View 7 Replies View RelatedI have the above motherboard. I have been using a video card which is three years old and thought I would try out the integrated video before my video card died. I switched it in the Bios and switched the monitor cable and it started fine on integrated video. The only thing is that the first screen where I can enter Bios does not show, so I am unable to enter the Bios. I tried hitting the delete button on the blank screen but nothing happens. I was able to shut down the PC and switch back to the video card, so I am OK. Does anyone have any idea why the first screen doesn't show on integrated?
View 2 Replies View RelatedMy friend recently gave me his HP desktop to take a look at. It came with phenom II quad core processor, 8gb of ddr3 ram, a 1.0 TB WD sata hdd, an integrated geforce nvidia 9100 graphics card, and a 300W psu. When I first turned it on, it booted up to the HP logo and froze there not allowing me to enter the BIOS. After resetting the BIOS I was able to get a slight way into the Windows 7 installation. I tried hooking up the hdd as an external to another desktop and it seemed to be working fine.
I deleted all partitions and reformatted it and tried again, same issue. I've tried with a second hard drive, which i know works, and it also gave the same freezing problem. I've also tried using a different psu which got me a little further into the installation but eventually froze and gave me 0x00000e9 hardware error. With no hard drive at all, it can boot a few times but will eventually freeze up at the logo screen, which led me to believe it might be an overheating problem.
I applied thermal paste to both the cpu and gpu heatsinks and on the first boot it froze during installation with the next few resulting in the same logo screen freeze. I've also realized the gpu heatsink is extremely hot to the touch and at one point, after numerous reboots, the display wouldn't even show. I don't wanna jump to the conclusion that the gpu is fried and buy a new motherboard without consulting anyone.
I lost my bios setup password
View 4 Replies View RelatedMy laptop does boot up when I press F2 to enter setup but in few seconds my laptop shut down automatically. I am using sony vaio model no. VPCEB46FG
Optional Information:
Computer OS: Windows 7 Home Premium (64-bit)
I've had my computer for over a year now and suddenly today i was watching a video when it lagged and then all of a sudden the screen went black. I turned it off and upon turning on again, I got the error "bios detected a problem with the cooling fan 902, press enter to shutdown" I have the lastest bios as far as I know and iv tried blowing into the slots with compressed air but nothing works.
View 2 Replies View RelatedI have one Dell Inspiron N5110 laptop.i was installed win 7 OS in it. after successfully installed my OS, machine is restarting but not enter into desktop.(I think not booting properly)
View 2 Replies View RelatedPretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot.
View 9 Replies View Relatedim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedI have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedI just got a new mobo (Gigabyte 990FXA-UB3) and a new CPU (AMD FX-6100). Gigabyte has been telling everyone that in order to use these components together, one must update the BIOS with your old processor (for me, a Phenom II x4) for the new processor to work. I don't understand how you update the BIOS for one processor to work with another.
View 10 Replies View RelatedToday, we can flash some BIOS from an operating system. Is this not quite dangerous, nutrient for viruses? When the OS is active, too many processes are active during this critical step and has a good chance something can go awry. I try to update always from the external usb floppy drive or from an usb stick.
View 9 Replies View Relatedhow to get into HP mini 2140 system Bios ?
I did try F10 and almost all other buttons with no results so far.
Is there a way to do the equivalent of a system file check on a BIOS? I just installed a BIOS update on my friend's new (Win7, 64bit) Compaq CQ57, and it occurred to me that checking it - maybe running a checksum on it? - would be a good idea. I'm going to install an Ubuntu partition on this machine. I can't find it now, but I seem to recall running across something about running a checksum on a BIOS from a Linux OS.
View 2 Replies View RelatedTrying to restore a Windows 7 image after a boot manager problem. Rampage IV Formula MB with no hardware or BIOS changes since the creation of the image 9 days ago, but get the following error message.
"The system image restore failed. Windows cannot restore a system image to a computer that has different firmware. The system image was created on a Computer using EFI and this computer is using BIOS."
I thought this MB used EFI.
Just since yesterday my laptop was attacked by some kind of malware that tries to scare me into buying their products and hiding all my files. I managed to unhide all my files but somehow the virus still remains. I tried every solution on the web to get rid of this virus but to no avail **** does not work at all.And to top it all this particular virus shuts down all my usb ports and disabling me to connect to another computer to share files even. So I decided to reformat my laptop. But the thing is when after I clicked system restore, the thing shut down. Ok fine everything was normal and it started up as usual, but the next thing that happened was that it was stuck on a black screen. I thought the program was processing but I was wrong ( I've never reformatted a computer so please bare with my sillyness ) I've tried many many times by shutting down and trying to click on system restore but still same result, stuck on a black screen. And pressing F11 doesn't really help either, it will still result in a black screen. I've tried to use the system recovery disc but it didn't work at all.
View 4 Replies View RelatedI was running windows 7 home premium perfectly for the last around 7 to 8 months. the other day I updated system bios and thereafter got the message to reactivate windows. I used my product key but turned out to be invalid.
View 9 Replies View Related about an hour ago my screen froze and the computer became unresponsive. I found it a bit wierd that it turned off as soon as I pressed the power button as normally it takes about 5 seconds to do this. Upon rebooting (and going through the 'start windows normally' thing I got a BSOD saying something along the lines of:'the bios in this system is not fully acpi compliant windows 7'anyway I googled this and fiddled around in BIOS a bit discovering that my 'acpi 2.0 support' option wasn't enabled so I've changed this. Also some people seemed to suggest removing each RAM module individually and testing each one etc so I did this also to the same effect. After putting them both back in I no longer got the above error message but this one:'a problem has been detected:memory_management...etc'Rebooted again and the BSOD I now encounter and have ever since says:
IRQL_NOT_LESS_OR_EQUAL
.
.
.
***STOP: 0x0000000A...
I've since tried booting safe mode, debugging mode etc but each time I do this the computer just reboots and takes me back to the 'do you want to start windows normally or start windows repair' screen. The second option ends up with either a non responsive black screen that can only be escaped by powering off or the above (last) mentioned blue screen.It might be worth noting; as my research suggests this is something to do with software drivers, that windows did a fairly massive update last night. Although I was able to run my computer for a few hours playing games/internet until this happened. Also in the past couple of months I have upgraded the RAM and GPU but the computer seemed to run fine with these for the weeks since.
I was trying to recover/reinstall win 7 and bring back my asus laptop to its manufacture state. When I run the recovery media (recovery dvd) that comes with my asus laptop and after answering the prompts, it gives off "missing operating system" message on an entirely black screen. I tried to go to the bios setting by hitting delete key upon boot-up but it does not respond. I switched off and back on several times trying the delete key every time but to no avail. It's an ASUS N61J Series with intel i7.
View 5 Replies View RelatedI was running Windows 7 ultimate x64 on my system (specs below), and I usually let my computer go into hibernate as it does that automatically after some time of system inactivity. Usually it will boot back up with no problem but then last week I tried to boot it up, it crashed and said system error.. I can't remember everything it said as it was obviously coded; since then I haven't been able to bring up the same warning screens.
Instead what happened was I reinstalled windows 7 on the same drive, formatted and all, and after installation it would finalize my settings, etc. After which, it would do a final reboot and, after bios goes, the computer hangs on a command prompt type screen with just a flashing underscore. Asking my family members, they proposed it might be a hardware issue so I bought a new hard drive (Seagate Barracuda 1tb.. not sure if that matters) and tried installing windows on that drive; same exact problem.
I also tried different combinations of RAM with my board, including just one stick of RAM, tried taking out the video card, tried taking out the sound card, etc. No dice. So my dad took his drive from his computer, that has an install of VISTA x64, and I plugged it into my computer and it worked perfectly. Conversely, I plugged my drive with the Windows 7 install into his computer and it also worked perfectly. We tried playing around with a few settings in the BIOS, etc. but nothing gives.
SPECS:
MOBO: Intel DP45SG
Chip: Q6600
Ram: Hynix 2x2gb and 2x1gb kingston
Vid card: Zotac GeForce GT 610
Sound: Creative X-Fi Xtremegamer
BIOS: Should be up-to-date, irregardless it ran Windows 7 before
I'm working on a computer with a RAID setup. It is 2 hard drives 500gb each showing up as 1tb in windows. Both drives show up in the bios but all of a sudden when trying ot start the computer I get a "Operating system is missing" error.
I'm trying to run a chkdsk form a win 7 64 bit disk and telling it to run on H; (system drive) but it says 'cannot open volume for direct access'.
The other drive, C: is just a recovery drive built into dell computer systems. I tried using a boot cd and running mbrfix to no avail.