With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 RepliesTrying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).
View 9 Replies View RelatedIs anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
View 10 Replies View RelatedI have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
View 9 Replies View RelatedI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View Relatedfor backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies View RelatedI got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies View RelatedI know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies View RelatedI support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
View 2 Replies View RelatedI am replacing an HDD with an SDD in my laptop.I have it partitioned the same way as the HDD except that D: is smaller.
system reserved, C:=system, D:=data-profiles-programs, E: =HP_TOOLS (fat32)
My plan was to image the system reserved, C: and E: partitions.The HDD is running in ACHI mode.What I want to know - When installing Windows 7, does it do something different on a SSD than a HDD such that imaging the HDD to the SDD will make a performance difference?
My PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image
View 2 Replies View RelatedI am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
View 5 Replies View RelatedNot sure what happened, the netbook is supposed to come with a re-image recovery point, but maybe i accidentally deleted it. anyway, that's not going to happen and i can't reinstall cleanly with a format because it is win 7 starter so i do not have a cd. can i just delete my cookies, my files, and uninstall all of my programs and sell it? the thing i'm worried about is access to bank accounts or anything else similar i used the internet for.
View 2 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 620 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 16126 Mb
Graphics Card: ATI Radeon HD 4200, 368 Mb
Hard Drives: C: Total - 953866 MB, Free - 854043 MB; D: Total - 953765 MB, Free - 953619 MB;
Motherboard: ASUSTeK Computer INC., M4A785TD-M EVO
Antivirus: Trend Micro Client/Server Security Agent Antivirus, Updated and Enabled
My machine is making a weird sound and I want to be prepared for the worst before I let a technician touch it.I'm running Windows 7 on my PC and am backing up files to a Microsoft Home Server but want a complete "copy" of my PC system (programs, files, settings, etc.).My head is starting to spin with everthing I've read and heard about cloning and imaging not to mention all the software choices (cloud or external hard drive) and if external hard drive is the way to go, which one.
Is there any way to take a disk image within Windows 7 or do I need to buy disk imaging software like Acronis?
View 9 Replies View RelatedI tried to create a disk image using the Windows 7 feature. The creation failed with a message that chkdsk /r should be run on the source and destination HDs. Destination HD was error free. Source HD had bad clusters replaced in five files.Second attempt to create a disk image failed with the same message.There are no system symptoms, everything seems to be working as usual.
View 9 Replies View RelatedAfter i bought my sony vaio VPCEF3E1E/WI i didn't received a windows CD but when i turned on the laptop it installed windows from an windows 7 image on C: or X: . Does anyone know how i can start that image to repair my laptop using a command prompt
View 1 Replies View Relatedwe have two different PC's[PC1 and PC2](hardware totally different) PC1 After preparing all my windows 7 (installing programs, configuring them, installing updates, activating programs and so on) I make my drive C: total image back up to external hard drive. PC2 I Boot up windows 7 recovery startup and choose restore from image and then I put in external hard drive with usb and make it restored on my other computer. Everything looks fine, it finishes with no errors and then system restarts. When windows are finishing to show "Windows starting" screen, computer restarts instantly.Then system autimatically suggests me to repair it, so ok then auto repairs are scaning and guess what it can't repair, because it finds some kind of problem with drivers, could be that they are incompatible with my new PC.how to make this work, how to fix issue that old PC's drivers are being loaded, maybe I am able to turn it off so default drivers are being loaded?The reason why I want to make this work cause I want to use it for multiple computers.
Simple summary:
PC1 Windows Image backed up to external HDD
PC2 Windows Image restored from external HDD
PC2 Windows can't start because of driver error
I'm using Norton ghost to create my Windows 7 and Win XP SP3 image. But I try to restore Win XP SP3 image, the system failed to boot up.
View 6 Replies View Relatedhaving a difficult issue with a customer who gets the following message when opening some but not all .exe files. Soz about the long message but ill list the things i have tried."C:Windowssystem32ajpjDhglj.DLL is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or software vendow for support."The error pops up for the same file name if i run say malwarebytes or explorer but not with Ccleaner. Clicking ok gets rid of the message and the program runs anyway.I thought the file name looked virus like but nothing gets picked up by malwarebytes or MSE. If i look for the file in System32 it is not there and is not hidden either. I searched drive C for the file and to my surprise it came up but in WindowssysWOW64 instead but all the letters were in caps this time. If i Scan it with MSE i get nothing but if i scan it or any other single file with malwarebytes the error changes to "C:WindowssysWOW64AJPJDHGLJ.DLL is either not designed to run on windows or.Most bad image threads ive read can be fixed by doing a SFC /SCANNOW but it doesnt work for me. Ill try updating him to sp1 in the meantime.
View 9 Replies View RelatedI'm building a Windows 7 image from scratch. Does anyone know how I can get the OEM info to display the make, model, and serial number of the PC in the System Properties automatically no matter which system I send this image to?I know you can set them manually in the registry, but I want to know if it's possible to pull this from the PC it's installed on.
View 3 Replies View RelatedI work for a company which needs to make small specialized PCs running Windows so they can run a specific program, hopefully on an 8gb CF card. I'm in the process of stripping down a copy of Windows 7 to be small enough for that, but that's something else. I need to be able to install the reduced copy of Windows 7 and our own software and then probably use Norton Ghost to create an image that I can just apply to every one of these computers we make in the future. Is there a way of creating this image from within my main OS instead of just creating and booting to a separate partition?
View 5 Replies View RelatedWhenever I open an image with Windows image viewer, it opens beneath the parent folder instead of on top. Is there a setting I'm missing here?
View 4 Replies View RelatedI recently bought an HP Elite Book and I decided to pick up an OCZ Vertex 3 for the computer (120GB SSD). I normally use Norton Ghost for a lot of things I do so I decided to use Ghost to Image the OEM HDD that came with the laptop too the SSD. I went in used the command prompt screen to use the switch -ntexact so it would work, did Disk -> Disk image and ran the process. Now when the unit boots with the SSD in it, it's getting hung up on the starting Windows 7 Screen.
View 3 Replies View RelatedI have A brand new hard drive.I also have an image of win 7.I was using the usb dvd tool,but on this computer the Setup from USB freezes at Starting windows.I also have a fresh installation of WIN7 in a VM in my netbook.How would i Transfer it to my HDD?
View 9 Replies View Related