Macrium Vs Acronis True Home Image 2011
Feb 23, 2011
I know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies
ADVERTISEMENT
Jan 11, 2012
I have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies
View Related
Jun 2, 2012
I support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
View 4 Replies
View Related
Jun 22, 2012
I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
View 2 Replies
View Related
Dec 6, 2011
Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
View 10 Replies
View Related
Jan 3, 2012
I have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
View 9 Replies
View Related
Nov 28, 2011
I got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies
View Related
May 4, 2012
My PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
View 10 Replies
View Related
Dec 14, 2012
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies
View Related
Dec 16, 2012
Attempting to restore an image to my dad's computer as a test in case of a crash. He is running Win 7 Pro 64bit and I have made the Macrium rescue CD which finds the images and reports a successful operation. However, when I try to start the new disk, it gets to the windows flags screen and goes nowhere for an hour or more.
I have used the exact same procedure with my Win 7 Pro 32bit computer and it all works fine.
View 5 Replies
View Related
Mar 13, 2012
I recently built a pc and all is well. Clean install of Windows 7 HP 64. For the first couple of days I was in and out of the system as the default admin (user you are asked to create during Windows 7 install). It wad during this time I installed macrium reflect free 5. I images the system after getting all the drivers in and then set up a scheduled backup for 7am each day. Worked fine.
Now I have created a normal user for me without admin privilege (for security reasons) which will be my day to day login. However this morning macrium failed to run the scheduled image. I was logged in as me, the low lvl user, not admin. The log file had an error about being unable to access adminxml file
I'm guessing this is because I installed macrium whilst an admin? Additionally I created the xml file whilst admin and then turned it into a schedlue whilst admin. However the xml and schedule are both set to run as admin with the admin password typed in.
Macrium is available to me as a normal user but when I launch it I'm asked for the admin password. Just trying to give as much info as poss.
View 8 Replies
View Related
Aug 7, 2012
I recently purchased a new hard drive, and to this point have been utilizing Macrium only for backup images.
What I'm trying to do is copy a working image of my old hard drive including the OS Xp, to the new hard drive, but the pc won't boot with the copy installed on the new hard drive!
View 2 Replies
View Related
Jan 15, 2013
I just noticed that the default location for the xml files it creates with each image is on my C:.... My Documents/Reflect.I always just let it choose until I came to the image, which is on an external drive.Should these be on my external drive, and can I move them safely so they will be recognized, in case my C: fails?In other words, can I move them and Macrium will find them? Do I have to do a step after I move them
View 6 Replies
View Related
Jul 14, 2011
Trying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).
View 9 Replies
View Related
Sep 8, 2011
for backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies
View Related
Nov 19, 2012
Quote: Acronis International has released a beta version of True Image Lite 2013, a stripped-down version of its True Image backup tool.The new release ditches disk, partition, email and file backup types, for instance (there�s non-stop backup and online backup only). There are no full or differential backups (just incremental). No scheduling, no backups to CDs, DVDs or Blu-ray, no option to create a bootable recovery disc, and of course none of the extensive settings you�ll find in the full True Image package.
View 3 Replies
View Related
Jun 3, 2011
I've got a home network with Homegroup working fine across three /four machines & printers.I've just installed a small test server and loaded Windows Small Business Server 2011 (SBS2011)I've tried connecting to this server from two Win 7 pc's and having no joy. Also, cannot even see the server on my network from the pc's.If I try to use the sbs2011 connector software (as recommended) I enter url... and get a software download from the server. This is supposed to make it easy to link the pc to the server and run backups and so-on.However it fails and gives me an "unexpected error" after trying to log me in (I think).I cannot see the server at all from the pcs other than by using remote desktop protocol - network search and network sharing both fail to see it.I've removed my pcs from the homegroup in case that is the conflict but still no joy.BTW, the server CAN see the other pcs on the network when it performs a network search.
View 1 Replies
View Related
Jul 8, 2012
I have two Windows 7 machines which both flawlessly access my Home Server 2011 via Remote Desktop.When I attempt to access the Hone Server via Live Live Mesh "Connect to this Computer" I receive a log in screen request for a Ctrl-Alt-Del. Clicking the Remote Desktop Window link to issue the request has no affect. No other action is available except to disconnect from the server.
View 1 Replies
View Related
Jun 5, 2012
I changed jobs but still have my mobile phone. I was syncing with the old job's exchange, but the new job uses blackberry (real happy about that one!).Anyway, I have extra computers laying around the house... was wondering if I bought and loaded up Windows Home Server (with Outlook), does anyone know if I can run it like an Exchange server mainly to keep my phone updated?
View 1 Replies
View Related
Jul 29, 2011
wich version of Auto CAD instale in window-7 home basic 64bit
View 2 Replies
View Related
Apr 4, 2011
My firewall, security settings and browsing has been disabled. The various remedies (process explorer, task manager) has been tried in SAFE MODE but they do not work.removal of win7 internet security 2011 virus.
View 1 Replies
View Related
Aug 8, 2011
I have only just installed Win 7 and as I was experimenting I clicked on the hidden Icons in the task bar and I found the get image icon. I have no idea how to use it or where the images go. I am assuming it is a capture device.
View 5 Replies
View Related
Oct 21, 2012
I was wondering how to put win 7 back on laptop with new hard drive since old one failed and no backup. Is there an image I can use and then reuse the original win 7 key on laptop sticker?
View 2 Replies
View Related
Oct 7, 2012
I recently changed o/s from xp pro to 7 home premium. Paintshop looks completely different & I can't figure out how to invert an image with the new paintshop.
View 4 Replies
View Related
Jun 27, 2012
I am using window 7 home basic 64 bit. When I click on an image and set that image as "desktop background" then it does not effect anything. Even I go to control panel and then background setting and set or change background then also it does not do anything.
View 2 Replies
View Related
Jun 27, 2011
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
View 9 Replies
View Related
Nov 20, 2009
I am new to all of this stuff and I'm looking for a True Blood theme I know that there is one out there because my husband had it on his computer. but now i can't find it. so if there is anyone out there that can help me that would be great.
View 9 Replies
View Related
Nov 21, 2010
I recently reset the system to 'True Type' and did not like the appearance and turned off the True Type. However, I'm now left with applications that are still showing either parts of their software in True Type or all of their software's representation in same.Outlook, Bookmarked (on toolbar) Firefox pages, Explorer, and more.Is there not a way to get rid of True Type once selected?
View 9 Replies
View Related
Dec 2, 2012
Will try to describe my problem as best I can.I have a 3 yr old Desktop HP PC.If I remember right, it came with "integrated audio," but I might be wrong with this.Have the Creative SoundBlaster audio setup/program too.Just bought a new pair of Logitech desktop speakers.Not too expensive; only about $ 25 or so.Nice sound, but:If I do the speaker test that is on one of their menus (the Creative menu), and click the left speaker, sound comes out of both speakers. Same if I click the right speaker; sound again comes out of both. Now that I am aware of it, DVD's and other sounds also seem monaural from both speakers; each speaker playing the same thing.There are all sorts of options, but I can find none that say "Balance" as I would expect. Also, no balance knob on speakers.
It seems as if the system is working in a monaural mode, rather than stereo.All the cables, etc are stereo, and I am feeding them into the green Line-In jack on the back of the PC.how to change it from, apparently, Monaural to true Stereo. I looked in Device Manager settings for sound, and everywhere else that has a sound option screen, but nothing seems appropriate, or works.I dumped the old speakers, so have no idea if the same with them, or a problem with these new Logitech ones. My "guess" is that the old ones probably played the same way, and my problem is with some setting in ther PC rather than the new speakers, but...?
View 3 Replies
View Related
Jun 7, 2012
I have ported all classic appearance themes what you have seen in Windows 98/2000/ME, such as Bricks Desert Eggplant Liac Maple Marine Plum Pumplkin Rainy day Red blue white Rose Slate Spruce Storm Teal Wheat I feel the nostalgie with them. Maybe you will like them too.
View 3 Replies
View Related
Jan 15, 2013
I notice that Macrium has a lot of updates. Should I make a new disc and a new image with each update. I try to read the contents of the update but it is difficult to understand at times. I image occasionally and keep sensitive data on removable media.
View 4 Replies
View Related