I have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
View 9 Replies
Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
View 10 Replies View RelatedI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View RelatedI know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies View RelatedI support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
View 2 Replies View RelatedMy PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies View RelatedTrying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).
View 9 Replies View Relatedfor backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies View RelatedI got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies View RelatedQuote: Acronis International has released a beta version of True Image Lite 2013, a stripped-down version of its True Image backup tool.The new release ditches disk, partition, email and file backup types, for instance (there�s non-stop backup and online backup only). There are no full or differential backups (just incremental). No scheduling, no backups to CDs, DVDs or Blu-ray, no option to create a bootable recovery disc, and of course none of the extensive settings you�ll find in the full True Image package.
View 3 Replies View Relatedi've got a problem to install matlab 2009 32 bit in windows 7 64 bit?
View 1 Replies View RelatedI am pulling my hair out here as i just can not restore a windows 7 pro image backup to a 128gb SSD.
I have a Samsung f1 1tb drive which has a 48.7gb partition and a 882gig partition. The windows boot drive c is the 48.7gb Partition and the larger one is for storage.
I have used windows 7 pro image clone and make an image of the C: partition of the drive which is 45gb full and have stored it on a usb drive.
Now i have formatted the SSD drive as i have got windows 7 pro on there but there's far far to much work for me to get it back to the way it is on my Samsung drive.
I followed this guide
(URL)
now where it says
In the next screen just click on Next...there are no other partitions in this instance so we don't need to worry about excluding disks.
in the exclude menu i checked to see if the ssd was in there which it was and was unticked.
The restore process will begin. It might take a few hours to restore everything depending on the size of the image and how much data there is. Provided there are no errors and the process completes successfully, your system will restart and the system should be restored.
it says can not find a drive to put the image restore on ?
I have tried disk part and it shows that there are 2 hard drives there one ssd on a sata and the other on a usb with the image on there.
I can not for the life of me get it to put the image clone on the ssd drive.
am i doing something wrong can anyone help.
I have even tried to format the ssd and it still will not work
I have just currently installed 1 x 2 TB HDD. Installed Windows 7 64 bit on one. After installing all my basic applications I then decided to create a backup on my spare 1TB allocating 50 gig for the image. The image itself is only 35gig but when I click on create image it runs for a little while then displays the following message:
"There is not enough disk space to create the volume shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. For volumes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)". It seem like the OS does not recognise 1TB hdd
I want to capture screen flow in video or image on windows 7 64 bits system, with NVidia Quadro 600 graphic card (driver is up to date). I use lib vlc for video capture, or "print screen" button for image capture. When I try to capture a fullscreen opengl application, or a QML application, or WPF application, the captured image is black. It seems that graphic card content can't be acquired. It is the same for each computer which is under windows 7. This manipulation worked on windows XP.
Question:
What are the changes on screen capturing between windows XP and windows 7?
Is there any option to activate in system?
Is there any software which could work (with an API)?
Just got a question regarding D2 - LOD expansion. Here's what happened, I downloaded the game, installed the game. All good then I mounted the Expansion image via Daemon Tools, had no success. It's not accepting / won't run the image and gave me an error. I got freaked out. System froze and there's nothing that I can do aside from pressing the "reset" button. Is my OS compatible to the game? I got a broken file on my OS (OS issues) or the image itself is corrupted?
View 6 Replies View Relatedi upgraded my os from xp to win 7 there some programs on my image files which are not running fine on Win 7 like counter strike condition zero?
View 2 Replies View RelatedAfter restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
View 5 Replies View Related1) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
I have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
View 9 Replies View RelatedC:Windows32d3dx10_43.dll is either not designed to run on windows or it contains an error. Please try reinstalling.I have reinstalled both games a few times but i'm still getting the same problem. is this a simple fix?
View 1 Replies View RelatedI have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies View RelatedAfter reading a couple of sites could someone direct me to a good site/version of Ultra VNC that works on Windows 7 64 bit?
View 4 Replies View RelatedI have a batch file that uses Setenv.exe, I get an error when i run the batch file and it gets to the Setenv command. It states Setenv.exe can not start due to being incompatable with 64 bit windows. Does anyone know a work around for this or is there a 64 bit version available
View 1 Replies View RelatedI downloaded FarCry 1.4 and it seemed to install ok, but will not start up under 64bit Windows 7?
View 9 Replies View RelatedI cannot open Help files that require the Windows Help (WinHlp64.exe) program.
View 1 Replies View RelatedI cannot get autorun to work in Windows 7 64 bit for the internal drives. I have tried every suggestion posted, including the command "shellhwdetection", as well as configuring it in the control panel, and nothing works. The USB drive does work, though. In addition, if I insert a disc in the internal drive and then click on the drive in windows explorer, it ejects the disc, so I can't even see what's on a disc.
View 3 Replies View RelatedI have ported all classic appearance themes what you have seen in Windows 98/2000/ME, such as Bricks Desert Eggplant Liac Maple Marine Plum Pumplkin Rainy day Red blue white Rose Slate Spruce Storm Teal Wheat I feel the nostalgie with them. Maybe you will like them too.
View 3 Replies View RelatedIn Windows Xp i ran Eudora 7.1, well Eudora 7.1 will not work in Windows 7 64bit.So i downloaded Mozilla Earlybird 6.02 what i want to do is Run 5 of the same program different folders for different e-mail accounts can this be done?Right now seems to default to one account
View 9 Replies View Related
