I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
View 2 Replies
I know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies View RelatedI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View RelatedI support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
View 10 Replies View RelatedI have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
View 9 Replies View RelatedMy PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
I would like to create a daily folder on system startup which has the date like this 12-03-2012 I also want it to go to a certain place on my hard drive C:Users/Name/My Documents I have this script but it puts the date the wrong way around and I would prefer dashes in between the dates? for /f "skip=1" %%d in ('wmic os get localdatetime') do if not defined mydate set mydate=%%d
md %mydate:~0,8%?
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies View RelatedTrying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).
View 9 Replies View Relatedfor backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies View RelatedI got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies View RelatedQuote: Acronis International has released a beta version of True Image Lite 2013, a stripped-down version of its True Image backup tool.The new release ditches disk, partition, email and file backup types, for instance (there�s non-stop backup and online backup only). There are no full or differential backups (just incremental). No scheduling, no backups to CDs, DVDs or Blu-ray, no option to create a bootable recovery disc, and of course none of the extensive settings you�ll find in the full True Image package.
View 3 Replies View RelatedIf I click on one directory I get "Windows Explorer has stopped working". It used to be fine but crashes WE every time now. A colleague suggested right click and reset the properties, but right click causes the crash too.I can open it remotely from an XP system, and I can navigate it in a DOS box so I know the files are all still good.Disk check says "No problems".Sophos anti-virus scan finds nothing. Malwarebytes scan finds nothing.None of these crash or report corruption.
View 9 Replies View RelatedWhenever I click on folders that contain mkv/h264 files, explorer crashes. But if I view the folders through the open feature of say notepad, then I can click and delete the folders no problem.
View 9 Replies View RelatedI want to access my home folder file in fedora 13 in the Window 7
View 1 Replies View Relatedhow can I share a folder to specific remote person who is connected to our homegroup? We have a small office and all are connected and I would like to share some folders only to specific persons. When I open homegroup I can see everyone but when I making a rull for sharing, I do not know what to write to find those persons.
View 5 Replies View RelatedMy laptop with Windows 7 home premium has developed a problem recently. When it tried to log on to the home wifi.
1. It will connect but the DHCP insist on connecting to a specific IP address, in this case (192.168.0.58)
2. Then tells itself that the address is already in use on the server, I looked at the router log, it never called and the 192.168.0.58 is unused.
3. Then it will fail to call for another IP address.
4. So the adaptor will show connected but no internet.
I have tried:
1. rebooting the router, even changing the SSID. Same deal.
2. Assigning a static IP on laptop. Worked! but the second that I change it back to dynamic, same ole problem.
3. Even uninstall the wifi adapter, then reinstall it. Worked for a few minutes, then same problem again.
After restoring an image made with Clonezilla that used to work, Windows 7 is unable to start. When prompted, I used the DVD, but it still fails with "Startup Repair could not detect a problem".When rebooting, it says "Windows Error Recovery: Launch Startup Repair (recommended) and Start Windows Normally": Launch Startup Repair fails with "Windows Boot Manager: 0xc000000e The Boot selection failed because a required device is inaccessible".FWIW, to investigate, I deleted both partitions (#1 to hold the OS, #2 to hold images) and re-created them with enough space to hold (#1 was made a bit bigger because I didn't know how to specify infos in cfdisk accurately), and Clonezilla happily restored the image.
View 6 Replies View RelatedOne directory (Directory A) containing the same files as Directory B but with the wrong Date created / modified attributes.how to make all the files in Directory A have the same date created/modified attributes as Directory B.
View 7 Replies View RelatedI have a 10 files that have all been categorised into about 40 folders. These files have been damaged.I have a backup of all these files, but they are not categorised and sit in a single directory.Does anyone know of an easy technique to batch replace the damaged files with the originals?
View 2 Replies View RelatedMy computer has been freezing up lately. The event error says its Kernal power. not sure how to fix it. Its freezing up when i log onto wow also.
View 1 Replies View RelatedI have only just installed Win 7 and as I was experimenting I clicked on the hidden Icons in the task bar and I found the get image icon. I have no idea how to use it or where the images go. I am assuming it is a capture device.
View 5 Replies View RelatedI was wondering how to put win 7 back on laptop with new hard drive since old one failed and no backup. Is there an image I can use and then reuse the original win 7 key on laptop sticker?
View 2 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI recently changed o/s from xp pro to 7 home premium. Paintshop looks completely different & I can't figure out how to invert an image with the new paintshop.
View 4 Replies View RelatedI am using window 7 home basic 64 bit. When I click on an image and set that image as "desktop background" then it does not effect anything. Even I go to control panel and then background setting and set or change background then also it does not do anything.
View 2 Replies View RelatedAfter restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
I am new to all of this stuff and I'm looking for a True Blood theme I know that there is one out there because my husband had it on his computer. but now i can't find it. so if there is anyone out there that can help me that would be great.
View 9 Replies View RelatedI recently reset the system to 'True Type' and did not like the appearance and turned off the True Type. However, I'm now left with applications that are still showing either parts of their software in True Type or all of their software's representation in same.Outlook, Bookmarked (on toolbar) Firefox pages, Explorer, and more.Is there not a way to get rid of True Type once selected?
View 9 Replies View RelatedWill try to describe my problem as best I can.I have a 3 yr old Desktop HP PC.If I remember right, it came with "integrated audio," but I might be wrong with this.Have the Creative SoundBlaster audio setup/program too.Just bought a new pair of Logitech desktop speakers.Not too expensive; only about $ 25 or so.Nice sound, but:If I do the speaker test that is on one of their menus (the Creative menu), and click the left speaker, sound comes out of both speakers. Same if I click the right speaker; sound again comes out of both. Now that I am aware of it, DVD's and other sounds also seem monaural from both speakers; each speaker playing the same thing.There are all sorts of options, but I can find none that say "Balance" as I would expect. Also, no balance knob on speakers.
It seems as if the system is working in a monaural mode, rather than stereo.All the cables, etc are stereo, and I am feeding them into the green Line-In jack on the back of the PC.how to change it from, apparently, Monaural to true Stereo. I looked in Device Manager settings for sound, and everywhere else that has a sound option screen, but nothing seems appropriate, or works.I dumped the old speakers, so have no idea if the same with them, or a problem with these new Logitech ones. My "guess" is that the old ones probably played the same way, and my problem is with some setting in ther PC rather than the new speakers, but...?
