I recently reset the system to 'True Type' and did not like the appearance and turned off the True Type. However, I'm now left with applications that are still showing either parts of their software in True Type or all of their software's representation in same.Outlook, Bookmarked (on toolbar) Firefox pages, Explorer, and more.Is there not a way to get rid of True Type once selected?
When I type in Word 2010, frequently my keyboard will refuse to type. It will type a couple letters and then I have to wait to get it to go on. Then it will type a few more, etc. Another time it will type without an issue.I have changed the battery.
I found a few pix in my files that I want to edit with Photoshop. I can't open them in PS because they are Type 1 or Type 2. When I try to open them, PS says they are .jpg.1 or. jpg.2. How do I get rid of the .1 and .2 so they become normal JPG photo files?I can look at them with Windows Photo Viewer but I can't figure out how to convert them to normal JPG files.
I am new to all of this stuff and I'm looking for a True Blood theme I know that there is one out there because my husband had it on his computer. but now i can't find it. so if there is anyone out there that can help me that would be great.
Will try to describe my problem as best I can.I have a 3 yr old Desktop HP PC.If I remember right, it came with "integrated audio," but I might be wrong with this.Have the Creative SoundBlaster audio setup/program too.Just bought a new pair of Logitech desktop speakers.Not too expensive; only about $ 25 or so.Nice sound, but:If I do the speaker test that is on one of their menus (the Creative menu), and click the left speaker, sound comes out of both speakers. Same if I click the right speaker; sound again comes out of both. Now that I am aware of it, DVD's and other sounds also seem monaural from both speakers; each speaker playing the same thing.There are all sorts of options, but I can find none that say "Balance" as I would expect. Also, no balance knob on speakers.
It seems as if the system is working in a monaural mode, rather than stereo.All the cables, etc are stereo, and I am feeding them into the green Line-In jack on the back of the PC.how to change it from, apparently, Monaural to true Stereo. I looked in Device Manager settings for sound, and everywhere else that has a sound option screen, but nothing seems appropriate, or works.I dumped the old speakers, so have no idea if the same with them, or a problem with these new Logitech ones. My "guess" is that the old ones probably played the same way, and my problem is with some setting in ther PC rather than the new speakers, but...?
I have ported all classic appearance themes what you have seen in Windows 98/2000/ME, such as Bricks Desert Eggplant Liac Maple Marine Plum Pumplkin Rainy day Red blue white Rose Slate Spruce Storm Teal Wheat I feel the nostalgie with them. Maybe you will like them too.
Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
I have a project I'm doing where I have up to 5 monitors. I have a video that I want to play, but I want it to be FULL SCREEN and stretched to every screen.Is there a software that can do this? I know I could just pull the edges of the window to fit, but that will look tacky and is unacceptable.I know there are hardware solutions, but I would prefer software.
I know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
I'm installing and configuring truecrypt on windows 7 home premium. Truecrypt as you know is use for maintain secure the data for the user so i implemented truecrypt in the partition D. I have installed windows 7 in the drive C. I moved the folder desktop, documents, pictures and downloads of windows 7 to this drive D that belongs now to truecrypt. My problem comes when i restart the system i can not keep the taskbar with my shortcuts of chrome, thunderbird and others programs. I found out ins this forum some tools to restore and backup the taskbar but it doesn't work well because at the end i see the shortcuts but it doesn't work any one of them.
When I open my library and look at my video files (arranged based on "date modified"), the files that are older than one week are alphabetically listed under "Earlier this week," "Earlier this month" and "Earlier this year." In contrast, when i copy those same files on a memory card (SDHC), they're arranged in true chronological order. I would like the library to show true chronological order (ie not separated by this week, this month, etc), so I could more easily determine which files have been copied over to the media card. How do I do that?
1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all)
I have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
I have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
I recently did a reinstall and I remember there was a way to make my default account have complete control of windows, with full access/rights/permissions/privileges. I did search for it but couldn't find it
I support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
Quote: Acronis International has released a beta version of True Image Lite 2013, a stripped-down version of its True Image backup tool.The new release ditches disk, partition, email and file backup types, for instance (there�s non-stop backup and online backup only). There are no full or differential backups (just incremental). No scheduling, no backups to CDs, DVDs or Blu-ray, no option to create a bootable recovery disc, and of course none of the extensive settings you�ll find in the full True Image package.
I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
My PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
In Windows Live Mail, when I receive junk mail, it is not placed in the junk mail folder, though it appears as unread mail. If I select the message and then click the Junk button, I receive the message "The selected message(s) could not be moved. An error has occurred." I tried removing and re-installing WLM and junk mail worked correctly for a while, but now the same problem is occurring again.
iam using windows7 32 bit...i just installed it yesterday...today when i'm making it 2 sleep..it just restarts...n asks if 2 start windows normally or in safe mode...n system starts again with rebooting....i tried many times ..but same thing ....its rebooting?
Basically, what seems to be happening is when I'm using a program or something, like, for example, Google Chrome, the window will randomly be deselected or deactivated. It's like someone clicked on another window. Normally, this isn't a huge deal. I just click on the window and keep typing until it happens again (it usually happens two or three times then stops for a while); It's just annoying. But the real issue is when I'm playing a full-screen game, where it's constantly minimized. Not only does it take a good minute or two for my slow computer to pull the window back up, but this also sometimes crashes games, like Team Fortress 2.I haven't been able to play any games for a while.
I have a HP laptop with windows 7 home basic, its being two days when i am trying to select a file or folder its getting selected all the above files also of that file or folder.
On one of my pc's selected text appears on a dark background colour which is hardly visible on dark backgrounds or templatesSo it's in that case almost impossible to see what you have selected.Normally this colour should be lightblue.Since this selected background colour seems to be a general setting of Windows 7, is there a way to change this into it's original state?
l am having a problem with installing due to a disk partition problem.. Im getting an error that says "The selected disk has an MBR partition table. On EFI systems Windows can only be installed to GPT disks".I have no clue and reading other forums it sounded like specific computers were having this problem but I built mine.Had a Windows 7 Ultimate x64 I used from a friend with no Key, Microsoft doesn't like that so I purchased a Key from them for Premium, used a W7 x32 disk by accident and I have 12 GBs of Ram so pretty inefficient.. I downloaded a W7 x64 version and am now having this problem...; First I've down this now bc Microsoft said they would send me a disk in the mail when I bought the Key but that was about 3 weeks ago and I would like to use my computer to its capabilities.
Running weekly backups through the Task Scheduler; periodic checks always show task completed successfully; discovered that "completed successfully" doesn't necessarily mean "completed correctly"; checked in Control Panel >> Backup/Restore and discovered that Windows reports my last 4 backups are not complete...there were files missing. Missing files belong to a hidden user account created for irrelevant purpose. Hero computer tech finds/edits registry to remove hidden account and backups now runs correctly.Problem: I now have 4 backup files that are incorrect and I don't know if that will cause any problems if I forget about their condition and choose to back up to one of them in the future.
how to solve before mentioned issue......i am trying to install aethros n/w adapter for my hp-g60 127nr notebook on Windows 7 platform...i have downloaded the .inf file but unable to install it..
After an attempt to dual boot my system with 32 bit OS, I couldn't boot back into 64, it wasn't even an option. So, I figured I must have messed up the install and it was time for a clean one. Now I get an option to dual boot windows 7 or windows 7 (recovered).
Recovered is the one I want, but if I switch my boot HDD to the one that Windows 7 (recovered) is on, bootmgr is suddenly MIA.
I have not a clue how to restore it, and I even wiped the second HDD clean.
I have created a backup of files and folders and of system in Windows 7 using the built-in backup program. How can I restore only a few selected files without restoring all. I note they are zip files so i can't identify which files i want to restore.