Conversion From True-color Graphic To Black And White?

Jan 15, 2013

1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all)

View 1 Replies


ADVERTISEMENT

Why Is Computer Screen Only Showing White And Black And No Color Graphics

Jun 22, 2012

My Compaq laptop no longer has color graphics. When I go to a website it just shows black letters...I just bought a new battery from HP and can't figure out what is wrong..

View 1 Replies View Related

How To Change Default Screen Color From White To Grey

Mar 26, 2011

my sister has macular degeneration and has trouble with the glare of her monitor. i want to be able to make the default screen color grey instead of white in all programs. is that possible? For example, i was able to make the screen color grey in Word and the font black so that it opens that way everytime. but that is only one program. i would like to be able to do this so that everything works that way.

View 7 Replies View Related

Default Print To Black & White?

Sep 28, 2010

We are running Windows 7 on a Dell Latitude Notebook. We are trying to set the printer to default to always print in black & white. We have been unsucessful. Even trying to change to black & white within a particular word document still prints in color.

View 4 Replies View Related

Black Screen With White Unblinking Underscore?

Aug 4, 2011

A few days ago I made a clean wipe on my Toshiba laptop, and installed Windows 7 Home Premium x86 as my OS. After installing the OS on my laptop, I proceeded to let windows update check for automatic updates and install them. After installing some updates, I clicked to have my computer reboot. After rebooting it showed the Toshiba screen with the F2, F12 options but after that it goes straight to a black screen with a white underscore. I pressed the power button to turn off then back on my computer and proceeded to press first F2 but it went back to the black screen with a white underscore, then restarted again pressing F12 went to the black screen again, restarted one more time pressing F8 for safe mode but nothing works.

View 14 Replies View Related

How To Make White Mouse Pointer Go Black

Mar 27, 2011

I would like to replace my elusive, puny little white mouse pointer with a big, bold black one. Win 7 is an all-singing, all-dancing clever stuff, i'm told so am thinking there must be a way of doing this as opposed to buying third-party software.

View 3 Replies View Related

Why Don't Get The Black And White Message After Restarting The Comp

Jan 4, 2011

My disk is only allowing me to reinstall on a bootable drive. Why don't I get the black and white message after restarting the computer that I need to hit any key to open up the disk so that I can install on a data only disk. My computer does not recognize my Windows 7 auto function. My boot sequence(CDROM and HD) has been changed several times without correcting the problem. I had a code 39 problem earlier indicated in contol panel and corrected the problem only part way.In the past I have had two ways to install windows 7 since Oct 08. Something is wrong with my computer. . Nero uninstalled. Belarc information available with different format.Windows 7 Home Premium (build 7600) 32 bit. 2.60 gigahertz AMD Athlon 64 X2 Dual Core 128 kilobyte primary memory cache 512 kilobyte secondary memory cache 64-bit ready Multi-core (2 total) Not hyper-threaded Board: ASUSTeK Computer INC. M2A-VM 1.XX Bus Clock: 200 megahertz BIOS: Phoenix Technologies, LTD ASUS M2A-VM ACPI BIOS Revision 1901 07/21/2008

1920 Megabytes Usable Installed Memory

Slot 'A0' has 1024 MB
Slot 'A1' has 1024 MB
Slot 'A2' is Empty
Slot 'A3' is Empty NEC DVD_RW ND-2510A ATA Device [CD-ROM drive]

View 9 Replies View Related

Colour Management Black And White Is Sepia?

Jul 2, 2011

this is my first post and I hope I am posting in the correct area. I have been looking for an answer to this and am still stuck after a couple of days.

I have pc with windows 7 home premium 64 bit and an LG flatron E1940S monitor, I am just moving on to this pc and intend to use photoshop on it. The problem is that moving my images from my xp system, the colours are not right. Black and white shows as sepia as an example, and there seems to be a brownishness to everything.

I have tried adjusting the monitor.I have looked at the colour management in windows and set to srgb. I have tried windows calibration and there was a slight difference but not a good enough correction to replace the original settings.i have installed the updates for the nvidia.

The monitor did not come as a bundle but was purchased with the pc and I just had to plug it in, I don't know if I need (nor where they are to be found) a driver/colour profile for that.

View 2 Replies View Related

PDFs Printing In Colour Even When Black And White Is Specified

Nov 10, 2011

so the printer settings are set to black and white on the server, the PC and on Adobe but when I try to print PDFs they still come off in colour!! What else could be set to do this?

View 2 Replies View Related

Can't Get Into Desktop Get A Black Screen With A White Moving Arrow?

Mar 12, 2012

I am stuck at a black screen with a white arrow you can move with your mouse. right click does nothing. heres what i tried so far just linking to another forum so its easier to see where i am at. really want to avoid having to reinstall windows.

View 9 Replies View Related

Asus Laptop Has Black Desktop With White Fonts?

Dec 6, 2010

My computer was attacked by Antivirus 2010. Thank goodness that my son is an IT guy. He removed the program; however, my desktop is now black with white text. There are no icons. When I hit a folder or document, the background is grey. What can I do to restore my desktop to color?

View 3 Replies View Related

Black Screen With White Cursor, Even With Recovery Disc

Feb 4, 2012

My Windows 7 machine is refusing to boot.

If I try to start it normally, it resets after the starting windows screen. If I try to use the other boot options (safe mode, etc), I get 'Windows is loading files' and then a black screen with a movable white cursor. The repair options all end up at the same black screen with cursor.

If I boot from the Windows 7 disc, after the 'press any key to boot from the DVD' screen, I don't get any options to install Windows, or select a language, I just get either the same starting windows > black screen with cursor, or the same list of repair safe mode options, all of which end up at the black screen with cursor.

If I boot from the Windows 7 recovery disc, after 'press any key to boot from the dvd' I get 'Windows is loading files', and then... the black screen with white cursor.

View 1 Replies View Related

When Boot Up Windows 7 / Only Get A Black Screen With White Cursor

Jan 28, 2013

I turn on my computer to eventually get a black screen with white cursor that will move around. The Toshiba insignia comes up beforehand as well as the windows four square icon then it is to this black screen and white cursor. I cant seem to get the computer to boot up from Windows 7 installation disc. Sometimes I also get a BOOTMGR image is corrupt. The system cannot boot. message as well. I imagine there is a solution of sorts as it seems many people have had a similar problem. I have a freind who maybe able to fix it seeing he is a computer programmer but that is not until the end of the week.

View 1 Replies View Related

How To Make Window Color Black

Nov 8, 2009

Right click on desktop, personalize, then go to window color. The closes option there is to black is "slate" which is a grayish color. I can make it darker by adjusting the brightness to darker but it is still a gray color. How can I make it black?? I remember I was able to do so in Vista

View 8 Replies View Related

How To Print A Black Document In Color

Oct 7, 2010

I have a scanned file that is black ink, but I can't print it due to my ink. I don't have black ink, so I want to print this document as is just in color is there a way in word or somewhere else?

View 2 Replies View Related

Is Screen Flickers And Then Either Goes Black Or Becomes A Certain Color

Feb 4, 2013

I'm not quite sure how to describe the issue(hence the title) but through several diagnosis I think the Graphics on the motherboard is failing. There is no add-on graphics, the system is a HP Pavilion P6310Y, AMD Athlon 2, 6GB of RAM, 1 TB of HDD Space. The onboard Graphics is NVidia GeForce 9100. The PC is about 3-4 years old.What is happening is the screen flickers and then either goes black or becomes a certain color. This happens whenever the PC is doing something involving alot of data(Scan Disk, Virus Scan, Email, Remote Desktop). The harder part is being able to tell whether the computer is crashing or after the graphics fails that the computer is still processing. I'm going go with a no because I have a feeling this could be an overheating issue as well.I have is if it is only the Graphics, would installing a Graphics Card solve the problem? Or will the rest of the motherboard eventually fail also?

View 1 Replies View Related

Print In Black When The Color Ink Is Empty?

Feb 5, 2013

My color cartridge is fairly new. I don't print a lot. I know it isn't empty. How can I refresh it so it will print?

View 6 Replies View Related

Clean Install Last Reboot Goes Into Black Screen / White Blinking

Dec 7, 2011

So, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.

View 8 Replies View Related

BSOD + Black Screen White Cursor + Can't Go To System Repair

Nov 11, 2012

first I was facing BSOD. So I tried going in by every type of safe mode, But it doesn't work, I just go to a black screen with moving cursor and I can't Open the Task Manager.So I tried system restore, failed with the CD. Then I tried the Grub4dos thing It failed as well. It just brings me to the black screen with white cursor.Also when I start in safe mode, it stucks at classpnp.sys and after awhile It goes to BSOD and reboots. By the way this all started when I installed a game, Dishonored.

View 1 Replies View Related

Computer Stuck At Black Screen With Flashing White Underscore?

Oct 21, 2012

Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.

I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.

I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.

I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.

View 4 Replies View Related

Windows 7 Won't Boot - Black Screen, White Blinking Border

Jun 14, 2010

I tried Linux yesterday, and wrote over my previous Windows bootloader files with GRUB.

I later that day (as I could not boot into Windows 7), I deleted the Linux partitions with Windows 7 DVD. Now, after BIOS I just get a white blinking border on a black screen.

I tried

bootrec /fixmbr
Success
bootrec /fixboot
Success
bootrec /rebuildbdc
Success
bootrec /scanos (Total identified Windows-installs: 0)

I also tried the "automatic" systemrepair (1st choice in the DVD menu, with no luck)

View 9 Replies View Related

Black Screen Followed By Multi-color Lines?

Jun 19, 2011

ok almost 2 months ago my computer blinked came back on and said a display driver had crashed ans was succsesfully recovered,well from then on out my screen was weird looking with lines ,text would dissapear ,and it was like this for a long time,so the other day my screen blinked and when it came back on my whole screen was multi colored and i could not see my desktop at all, now i read that it was probably just my video card going out so i uninstalled it thinking that .and it did,,for about 10 minutes and it did it again..i know i dont want to hear windows registery error cause i have alot on my comp that i would have to have saved and i shiver at the thought of the price of that...i mean i cannot see anything at all just alot of colors in small thin lines,.this is a home built comp, but it was made by someone who has been makeing comps for years so he knows what he is doing...

View 5 Replies View Related

Black And White Images On Integrated Webcam Of Dell Inspiron N 4050?

Jun 29, 2012

i have a dell inspiron n 4050 laptop..the problem is that the integrated webcam gives black and white images..i am using windows

View 4 Replies View Related

Restarts With Black Screen/white Cursor (non-blinking), Safe Mode Works?

Jun 21, 2012

I have a Dell Inspiron, not always but sometimes on start up it restarts to a black screen with a white cursor. Safe mode does work.I don't know why it sometimes does this or what makes it stop. I have tried just letting it try to load up for as long as an hour with no change, sometimes restarting has fixed it but sometimes (like now, it has done nothing no matter how many times I've tried).

View 5 Replies View Related

Sony Vaio Stopped Working & Flipped Over To Black & White Vaio Screen

Oct 29, 2012

I was working on an email Saturday when my Sony Vaio stopped working & flipped over to the black & white Vaio screen. Since then, I've been able to reboot it once, but it flips right back over to the Vaio screen. At one point, I was able to get to the Advanced Boot Options menu by hitting F8. I tried to restore to the last known good configuration. It got to the Windows logo screen, then went back to the Vaio screen, then went to the "Operating System could not be found" screen.The computer has a One Touch Web Access Without Booting Up feature.

View 3 Replies View Related

Having These Miscoloring, At White Spots And Black Spots On Screen There Is Cyan And Red Instead?

Nov 15, 2011

I've had this issue before, but this time i want to know how to fix it... without using Acer eRecovery. Im having these miscoloring, at white spots and black spots on my screen there is cyan and red instead. Ive tryed to scan a couple of times. With my normal AntiVirus = Kaspersky Pure and with Avast Free antivirus. which i unistalled

View 2 Replies View Related

No Default Color Profile Listed In Color Management?

Jun 7, 2012

I want to color calibrate my new Dell XPS 15z laptop, but before I do I'd like to back up the existing color profile in case I prefer it to the calibrated one ...

The only problem is, when I open Color Management, NO default color profile is listed, so I don't know what to go back to. I know there HAS to be a default color profile somewhere ... How do I find it?

View 3 Replies View Related

Graphic Card For Graphic Drawing Programs

Jul 20, 2009

I'm contemplating buying a graphic card, but have no clue on which one to get! I'm not really playing games, mostly for my graphic drawing programs. So looking at my specs what would you guys suggest?

View 9 Replies View Related

True Blood Theme

Nov 20, 2009

I am new to all of this stuff and I'm looking for a True Blood theme I know that there is one out there because my husband had it on his computer. but now i can't find it. so if there is anyone out there that can help me that would be great.

View 9 Replies View Related

Get Rid Of True Type Once Selected?

Nov 21, 2010

I recently reset the system to 'True Type' and did not like the appearance and turned off the True Type. However, I'm now left with applications that are still showing either parts of their software in True Type or all of their software's representation in same.Outlook, Bookmarked (on toolbar) Firefox pages, Explorer, and more.Is there not a way to get rid of True Type once selected?

View 9 Replies View Related

Monaural Rather Than True Stereo?

Dec 2, 2012

Will try to describe my problem as best I can.I have a 3 yr old Desktop HP PC.If I remember right, it came with "integrated audio," but I might be wrong with this.Have the Creative SoundBlaster audio setup/program too.Just bought a new pair of Logitech desktop speakers.Not too expensive; only about $ 25 or so.Nice sound, but:If I do the speaker test that is on one of their menus (the Creative menu), and click the left speaker, sound comes out of both speakers. Same if I click the right speaker; sound again comes out of both. Now that I am aware of it, DVD's and other sounds also seem monaural from both speakers; each speaker playing the same thing.There are all sorts of options, but I can find none that say "Balance" as I would expect. Also, no balance knob on speakers.

It seems as if the system is working in a monaural mode, rather than stereo.All the cables, etc are stereo, and I am feeding them into the green Line-In jack on the back of the PC.how to change it from, apparently, Monaural to true Stereo. I looked in Device Manager settings for sound, and everywhere else that has a sound option screen, but nothing seems appropriate, or works.I dumped the old speakers, so have no idea if the same with them, or a problem with these new Logitech ones. My "guess" is that the old ones probably played the same way, and my problem is with some setting in ther PC rather than the new speakers, but...?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved