so the printer settings are set to black and white on the server, the PC and on Adobe but when I try to print PDFs they still come off in colour!! What else could be set to do this?
View 2 Repliesthis is my first post and I hope I am posting in the correct area. I have been looking for an answer to this and am still stuck after a couple of days.
I have pc with windows 7 home premium 64 bit and an LG flatron E1940S monitor, I am just moving on to this pc and intend to use photoshop on it. The problem is that moving my images from my xp system, the colours are not right. Black and white shows as sepia as an example, and there seems to be a brownishness to everything.
I have tried adjusting the monitor.I have looked at the colour management in windows and set to srgb. I have tried windows calibration and there was a slight difference but not a good enough correction to replace the original settings.i have installed the updates for the nvidia.
The monitor did not come as a bundle but was purchased with the pc and I just had to plug it in, I don't know if I need (nor where they are to be found) a driver/colour profile for that.
how to colour in trimmings and borders black and then change the font colour. I want everything black with orange writing. I've seen it and I lik it, I just cant figure out to do it?Also, when I go to my find new skin page, it is really messy. Lots of bold bright borders and lines and broken lines. Is very hard to read. What have I done?
View 7 Replies View Relatedmy taskbar has turned from its normal colour "blue" to white,no other problems i can see, runninf windows 7 hp and internet explorer
View 2 Replies View RelatedWe are running Windows 7 on a Dell Latitude Notebook. We are trying to set the printer to default to always print in black & white. We have been unsucessful. Even trying to change to black & white within a particular word document still prints in color.
View 4 Replies View RelatedA few days ago I made a clean wipe on my Toshiba laptop, and installed Windows 7 Home Premium x86 as my OS. After installing the OS on my laptop, I proceeded to let windows update check for automatic updates and install them. After installing some updates, I clicked to have my computer reboot. After rebooting it showed the Toshiba screen with the F2, F12 options but after that it goes straight to a black screen with a white underscore. I pressed the power button to turn off then back on my computer and proceeded to press first F2 but it went back to the black screen with a white underscore, then restarted again pressing F12 went to the black screen again, restarted one more time pressing F8 for safe mode but nothing works.
View 14 Replies View RelatedI would like to replace my elusive, puny little white mouse pointer with a big, bold black one. Win 7 is an all-singing, all-dancing clever stuff, i'm told so am thinking there must be a way of doing this as opposed to buying third-party software.
View 3 Replies View RelatedMy disk is only allowing me to reinstall on a bootable drive. Why don't I get the black and white message after restarting the computer that I need to hit any key to open up the disk so that I can install on a data only disk. My computer does not recognize my Windows 7 auto function. My boot sequence(CDROM and HD) has been changed several times without correcting the problem. I had a code 39 problem earlier indicated in contol panel and corrected the problem only part way.In the past I have had two ways to install windows 7 since Oct 08. Something is wrong with my computer. . Nero uninstalled. Belarc information available with different format.Windows 7 Home Premium (build 7600) 32 bit. 2.60 gigahertz AMD Athlon 64 X2 Dual Core 128 kilobyte primary memory cache 512 kilobyte secondary memory cache 64-bit ready Multi-core (2 total) Not hyper-threaded Board: ASUSTeK Computer INC. M2A-VM 1.XX Bus Clock: 200 megahertz BIOS: Phoenix Technologies, LTD ASUS M2A-VM ACPI BIOS Revision 1901 07/21/2008
1920 Megabytes Usable Installed Memory
Slot 'A0' has 1024 MB
Slot 'A1' has 1024 MB
Slot 'A2' is Empty
Slot 'A3' is Empty NEC DVD_RW ND-2510A ATA Device [CD-ROM drive]
Doing some research for a co-worker.... He is running Windows 7 64 bit and trying to print a large PDF document. There are Horizontal black bands of differing lengths coming from the right hand side of the page. This is the only document he is having a hard time with and it does not happen on every page, Seems to be Random (except that they print they same way on the same page every time he has tested the print job. The bands only print when the text is aligned on the right side. I am able to print the document from my computer (XP) with no problems. Also, every where there is a band the text disappears from the left hand side of the page.
View 14 Replies View RelatedI use High Contrast Black as my theme. In the past, when I would print a document, it would print normally, i.e., black text on a white background. Some time ago, tho, my printer began to print the document as white print on a black background! But here is the strange thing: if I copy and paste my text to Notepad and print, it prints normally as black on white. Both Word 2010, Jarte, and Wordpad will NOT print normall, and I cannot find settings to change this behavior. Please note that to the best of my knowledge, I did NOT change any settings to cause this printing anomaly to begin. HOw can a person using the High Contrast BaBlack teheme arrange it so that documents print out normally, black text on the white sheet of paper?
View 2 Replies View RelatedI am stuck at a black screen with a white arrow you can move with your mouse. right click does nothing. heres what i tried so far just linking to another forum so its easier to see where i am at. really want to avoid having to reinstall windows.
View 9 Replies View Related1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all)
View 1 Replies View RelatedMy computer was attacked by Antivirus 2010. Thank goodness that my son is an IT guy. He removed the program; however, my desktop is now black with white text. There are no icons. When I hit a folder or document, the background is grey. What can I do to restore my desktop to color?
View 3 Replies View RelatedMy Windows 7 machine is refusing to boot.
If I try to start it normally, it resets after the starting windows screen. If I try to use the other boot options (safe mode, etc), I get 'Windows is loading files' and then a black screen with a movable white cursor. The repair options all end up at the same black screen with cursor.
If I boot from the Windows 7 disc, after the 'press any key to boot from the DVD' screen, I don't get any options to install Windows, or select a language, I just get either the same starting windows > black screen with cursor, or the same list of repair safe mode options, all of which end up at the black screen with cursor.
If I boot from the Windows 7 recovery disc, after 'press any key to boot from the dvd' I get 'Windows is loading files', and then... the black screen with white cursor.
I turn on my computer to eventually get a black screen with white cursor that will move around. The Toshiba insignia comes up beforehand as well as the windows four square icon then it is to this black screen and white cursor. I cant seem to get the computer to boot up from Windows 7 installation disc. Sometimes I also get a BOOTMGR image is corrupt. The system cannot boot. message as well. I imagine there is a solution of sorts as it seems many people have had a similar problem. I have a freind who maybe able to fix it seeing he is a computer programmer but that is not until the end of the week.
View 1 Replies View RelatedSo, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.
View 8 Replies View Relatedfirst I was facing BSOD. So I tried going in by every type of safe mode, But it doesn't work, I just go to a black screen with moving cursor and I can't Open the Task Manager.So I tried system restore, failed with the CD. Then I tried the Grub4dos thing It failed as well. It just brings me to the black screen with white cursor.Also when I start in safe mode, it stucks at classpnp.sys and after awhile It goes to BSOD and reboots. By the way this all started when I installed a game, Dishonored.
View 1 Replies View RelatedToday I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
I tried Linux yesterday, and wrote over my previous Windows bootloader files with GRUB.
I later that day (as I could not boot into Windows 7), I deleted the Linux partitions with Windows 7 DVD. Now, after BIOS I just get a white blinking border on a black screen.
I tried
bootrec /fixmbr
Success
bootrec /fixboot
Success
bootrec /rebuildbdc
Success
bootrec /scanos (Total identified Windows-installs: 0)
I also tried the "automatic" systemrepair (1st choice in the DVD menu, with no luck)
My Compaq laptop no longer has color graphics. When I go to a website it just shows black letters...I just bought a new battery from HP and can't figure out what is wrong..
View 1 Replies View RelatedI have an issue with my printer!!! it does this both on XP and Windows 7.if I print plain text, it is just fine but if I print a picture all black parts of the picture are printed out as silver color instead it has done this since I installed a new Black ink cartridge in my HP PSC 1210xi printer!I cannot figure out why it is doing this nor am I able to fix it!!! my ink status window on my computer says both color and black cartridges are ok!!!
View 4 Replies View Relatedi have a dell inspiron n 4050 laptop..the problem is that the integrated webcam gives black and white images..i am using windows
View 4 Replies View RelatedI have a Dell Inspiron, not always but sometimes on start up it restarts to a black screen with a white cursor. Safe mode does work.I don't know why it sometimes does this or what makes it stop. I have tried just letting it try to load up for as long as an hour with no change, sometimes restarting has fixed it but sometimes (like now, it has done nothing no matter how many times I've tried).
View 5 Replies View Relatedi have a Toshiba laptop running win 7 I'm on a network where the printer is plugged into a desktop running win XP via a USB cable. If I print using the network printer from the laptop i get blue and pink lines where black should be.I have not tried to print a picture so i don't know the results of that.
View 9 Replies View RelatedI was working on an email Saturday when my Sony Vaio stopped working & flipped over to the black & white Vaio screen. Since then, I've been able to reboot it once, but it flips right back over to the Vaio screen. At one point, I was able to get to the Advanced Boot Options menu by hitting F8. I tried to restore to the last known good configuration. It got to the Windows logo screen, then went back to the Vaio screen, then went to the "Operating System could not be found" screen.The computer has a One Touch Web Access Without Booting Up feature.
View 3 Replies View RelatedI've had this issue before, but this time i want to know how to fix it... without using Acer eRecovery. Im having these miscoloring, at white spots and black spots on my screen there is cyan and red instead. Ive tryed to scan a couple of times. With my normal AntiVirus = Kaspersky Pure and with Avast Free antivirus. which i unistalled
View 2 Replies View RelatedInstalled adobe 10 (or X) and tried to open a PDF. It opened up and then got an error message and then the page goes blank.
View 5 Replies View RelatedI am looking for a program that can index search huge amounts of PDF files.It also should have advanced search capabilities (phrases, list of words, dates etc) and it should have result previews.The one I came across is copernic desktop. But I didn't find the advanced search... and there were no result previews for pdf files (at least I didn't find it).The Ideal software would be like this: I put all the PDFs in a folder > Software indexed all the files in the folder and subfolders. once it's finished indexing I can enter advanced searches in the software and it immediately shows me not only the files which contain the search terms but also a preview (like google results, where you can see the search term highlighted in context)
View 4 Replies View RelatedIn one particular network drive I cannot open any PDFs.
* PPT - opens fine
* JPG/TIFF/etc - opens fine
* DOC - opens fine
* XLS - opens fine
* ACCDB - opens fine
* PDF - Acrobat Reader opens and then I get a pop-up "Error: Access denied."
To open any PDF I have to drag it from the network folder onto my desktop and open it from there. I can open PDFs from any OTHER network folder; it's just one specific path and subdirectories thereof where they won't open. Doesn't matter which office computer I use, I get the same error anywhere. I have R/RX/W/M (everything but full control) on the network folder. Same permissions as everyone else in my office.
I have:
* Reinstalled Acrobat reader (no luck).
* Disabled offline files (no luck because I didn't even know what that feature was for and never used it.)
* Double-checked permissions on the directory.
printer hang while printing and text printing
View 2 Replies View Related[The following are not the problems i faced on Windows XP]. I've connected my PC via HDMI 1.3!
I installed Windows 7 x64 in my PC. The real big problems i'm facing is with Nvidia.
1. First thing scaling didn't work i tried to fix it but no hopes. Good my monitor had built in scaling.
2. 59hz monitor refresh rate is another pain. My display works perfect in 60.001hz @ 1920x1200 resolution but it still resets to 59hz. Nvidia in there latest driver has informed that its the problem with Windows 7 OS. And microsoft says there is no theartical difference from 59hz and 60hz. Well there is huge difference especially when your play movies via DXVA in Media player classic home cinema where you your full colour range and shaders which causes some kind of boxing and not artifacts! Everything was proper in Windows Xp
3. Finally i don't about other but i've noticed massive difference in colour depth which is set to 32-bit but its showing only 24-bit colours which can easily be noticed in movies and games like Crysis. HDMI 1.2 supports upto 24-bit colour. But PC or PS3 has HDMI 1.3 which support 32-bit same as DVI connection. My monitor has upto 48-bit colour depth so the difference in colours while in 24-bit can be easily noticed.
Seriosuly is this a design flaw or enabling these would cause different problems. If any one has got a solution for this i would be happy to hear!