Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
View 10 RepliesI have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
View 9 Replies View RelatedI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View RelatedI know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
View 9 Replies View RelatedI support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
View 2 Replies View RelatedMy PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies View RelatedTrying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).
View 9 Replies View Relatedfor backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies View RelatedI got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies View RelatedQuote: Acronis International has released a beta version of True Image Lite 2013, a stripped-down version of its True Image backup tool.The new release ditches disk, partition, email and file backup types, for instance (there�s non-stop backup and online backup only). There are no full or differential backups (just incremental). No scheduling, no backups to CDs, DVDs or Blu-ray, no option to create a bootable recovery disc, and of course none of the extensive settings you�ll find in the full True Image package.
View 3 Replies View RelatedI am pulling my hair out here as i just can not restore a windows 7 pro image backup to a 128gb SSD.
I have a Samsung f1 1tb drive which has a 48.7gb partition and a 882gig partition. The windows boot drive c is the 48.7gb Partition and the larger one is for storage.
I have used windows 7 pro image clone and make an image of the C: partition of the drive which is 45gb full and have stored it on a usb drive.
Now i have formatted the SSD drive as i have got windows 7 pro on there but there's far far to much work for me to get it back to the way it is on my Samsung drive.
I followed this guide
(URL)
now where it says
In the next screen just click on Next...there are no other partitions in this instance so we don't need to worry about excluding disks.
in the exclude menu i checked to see if the ssd was in there which it was and was unticked.
The restore process will begin. It might take a few hours to restore everything depending on the size of the image and how much data there is. Provided there are no errors and the process completes successfully, your system will restart and the system should be restored.
it says can not find a drive to put the image restore on ?
I have tried disk part and it shows that there are 2 hard drives there one ssd on a sata and the other on a usb with the image on there.
I can not for the life of me get it to put the image clone on the ssd drive.
am i doing something wrong can anyone help.
I have even tried to format the ssd and it still will not work
i upgraded my os from xp to win 7 there some programs on my image files which are not running fine on Win 7 like counter strike condition zero?
View 2 Replies View Related1) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
I have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
View 9 Replies View RelatedC:Windows32d3dx10_43.dll is either not designed to run on windows or it contains an error. Please try reinstalling.I have reinstalled both games a few times but i'm still getting the same problem. is this a simple fix?
View 1 Replies View RelatedI have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies View RelatedI have ported all classic appearance themes what you have seen in Windows 98/2000/ME, such as Bricks Desert Eggplant Liac Maple Marine Plum Pumplkin Rainy day Red blue white Rose Slate Spruce Storm Teal Wheat I feel the nostalgie with them. Maybe you will like them too.
View 3 Replies View Relatedthis is my first time using Acronis and I don't want to blow it.I'm ready to do a restore to solve my corrupted type and a few related problems.I'm booting from the Acronis Recovery CD.Once I'm in Acronis I have a few questions. I select Recover My Disks.In Archive Selection.I select the back up which is on an external hard drive.Recover whole disk and partitions.Select items to recover.
[code]...
After getting ti 2010 working initially in new windows 7 install, I now get the dreaded "program stops working" which appears to be the new BSOD for windows 7. This happens at initial launch and sometimes into point where I select location of backup folder. I've tried reinstalling about a dozen times to no avail and I've even used the cleaner utility with no success. I've tried the following version of true image home 2010: 6053, 7046, 7154 and 7160. Is there a preferred version for windows 7 or should these versions be installed in a certain order? All I'm trying to do is backup an ssd drive (C) to an external 3 tb drive. This should not be a complicated event.
I've also posted this message on Acronis Forum but have not yet received any responses. I hope to do better here.If there's no solution can someone recommend backup software that is very reliable and easy to use. All I want to do is do full backup from ssd drive and data disks to an external usb drive on a regular basis.
I want to create a full DISK IMAGE, ie: one big file so if I need to restore my whole hard drive, I can. Does Win 7 backup do that?
View 5 Replies View RelatedWhen I upgraded to Win 8 from Win 7 I imaged to my 2T usb drive with both of these programs.Is having two dissimilar programs going to cause any troubles?I always depended on Acronis but it seemed to be hard to install this time. They both check out ok with the discs.If 2 backups were a dependable move and did not cause a conflict, I would keep it as is.Should I keep the two or just one?
View 3 Replies View RelatedI am new to all of this stuff and I'm looking for a True Blood theme I know that there is one out there because my husband had it on his computer. but now i can't find it. so if there is anyone out there that can help me that would be great.
View 9 Replies View RelatedI recently reset the system to 'True Type' and did not like the appearance and turned off the True Type. However, I'm now left with applications that are still showing either parts of their software in True Type or all of their software's representation in same.Outlook, Bookmarked (on toolbar) Firefox pages, Explorer, and more.Is there not a way to get rid of True Type once selected?
View 9 Replies View RelatedWill try to describe my problem as best I can.I have a 3 yr old Desktop HP PC.If I remember right, it came with "integrated audio," but I might be wrong with this.Have the Creative SoundBlaster audio setup/program too.Just bought a new pair of Logitech desktop speakers.Not too expensive; only about $ 25 or so.Nice sound, but:If I do the speaker test that is on one of their menus (the Creative menu), and click the left speaker, sound comes out of both speakers. Same if I click the right speaker; sound again comes out of both. Now that I am aware of it, DVD's and other sounds also seem monaural from both speakers; each speaker playing the same thing.There are all sorts of options, but I can find none that say "Balance" as I would expect. Also, no balance knob on speakers.
It seems as if the system is working in a monaural mode, rather than stereo.All the cables, etc are stereo, and I am feeding them into the green Line-In jack on the back of the PC.how to change it from, apparently, Monaural to true Stereo. I looked in Device Manager settings for sound, and everywhere else that has a sound option screen, but nothing seems appropriate, or works.I dumped the old speakers, so have no idea if the same with them, or a problem with these new Logitech ones. My "guess" is that the old ones probably played the same way, and my problem is with some setting in ther PC rather than the new speakers, but...?
I have a project I'm doing where I have up to 5 monitors. I have a video that I want to play, but I want it to be FULL SCREEN and stretched to every screen.Is there a software that can do this? I know I could just pull the edges of the window to fit, but that will look tacky and is unacceptable.I know there are hardware solutions, but I would prefer software.
I a new HP Pavilion Slimline x64, with Windows 7 Ultimate x64. I installed Acronis 11.0 TI on it to create a backup of my computer to store on my external hardrive.
However, when I go to select the drive to backup, only the external drive, the G: drive, shows up in the list to select. I can see the C: drive from my other computers in my home network, and from the slimline PC, but, Acronis does not see it. Thus, I am unable to create the backup. The C: drive is a Hatachi HS72101CLA630 SATA Disk Drive
I have been to the Acronis forum and tried the suggestions there to uninstall, reinstall Acronis, and still the C: drive does not show up.
I have used this same Acronis on all my other computers to create backups and never had any problem, even with others that have the Windows 7 x64 as well. So I am wondering if anyone here has ever used Acronis and if so, ever had a problem with it not seeing the C: drive to select as the source drive?
I'm installing and configuring truecrypt on windows 7 home premium. Truecrypt as you know is use for maintain secure the data for the user so i implemented truecrypt in the partition D. I have installed windows 7 in the drive C. I moved the folder desktop, documents, pictures and downloads of windows 7 to this drive D that belongs now to truecrypt. My problem comes when i restart the system i can not keep the taskbar with my shortcuts of chrome, thunderbird and others programs. I found out ins this forum some tools to restore and backup the taskbar but it doesn't work well because at the end i see the shortcuts but it doesn't work any one of them.
View 1 Replies View RelatedWhen I open my library and look at my video files (arranged based on "date modified"), the files that are older than one week are alphabetically listed under "Earlier this week," "Earlier this month" and "Earlier this year." In contrast, when i copy those same files on a memory card (SDHC), they're arranged in true chronological order. I would like the library to show true chronological order (ie not separated by this week, this month, etc), so I could more easily determine which files have been copied over to the media card. How do I do that?
View 2 Replies View Related1) Say Computer A has a 1GHz processor and 16-but word size. Computer B has a 2GHz processor and 32-bit word size. Compare the processing speeds of these computers quantitatively. Show calculations.2) Conversion from true-color graphic to black and white. Explain what the conversion did in terms of pixel bytes or bits3) If you run the CPU simulator program, you will find that it uses the system bus 12 times. Explain how this number comes about. (You must explain why based on how cpu operates. This will involve a little arithmetic. Show all)
View 1 Replies View Related