When I upgraded to Win 8 from Win 7 I imaged to my 2T usb drive with both of these programs.Is having two dissimilar programs going to cause any troubles?I always depended on Acronis but it seemed to be hard to install this time. They both check out ok with the discs.If 2 backups were a dependable move and did not cause a conflict, I would keep it as is.Should I keep the two or just one?
View 3 RepliesI have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies View RelatedI want to create a full DISK IMAGE, ie: one big file so if I need to restore my whole hard drive, I can. Does Win 7 backup do that?
View 5 Replies View Relatedthis is my first time using Acronis and I don't want to blow it.I'm ready to do a restore to solve my corrupted type and a few related problems.I'm booting from the Acronis Recovery CD.Once I'm in Acronis I have a few questions. I select Recover My Disks.In Archive Selection.I select the back up which is on an external hard drive.Recover whole disk and partitions.Select items to recover.
[code]...
I have a 2TB in my desktop that i use for backups. I have my desktop backed up onto it and my usb drives. I am using acronis so that i can create an image backup and i am trying to save it onto the network drive.The folder is shared using the advanced settings. When i select the network location in acronis to save the backup it asks for the password, i type in my user name for my desktop but i dont have a password set. It wont let me continue without typing a passcode in. But there is none.Do i have to define a password to use network shares?
View 4 Replies View RelatedAcronis Backup and Security 2010
Quote: Originally Posted by
http://www.acronis.com/homecomputing/products/backup-security/beta/#registration
We are pleased to announce our first Beta release of a brand new product offering, Acronis® Backup and Security 2010. This product bundles Acronis True Image Home 2010, the recently announced Acronis Online Backup and a brand new product - Acronis Internet Security 2010. Together they form the most complete PC protection product on the market, combining full-featured, high-performance Internet security capabilities with both local and online backup and recovery. more: Hard disk drive backup and system recovery tools allow you to instantly restore the entire machine
I don't understand what is the point. Why they need creating AV now...
For those who don't know yet.
It's a new security suite by well known back-up software Acronis.
Acronis Backup and Security 2010:
Acronis Backup & Security 2010 is the first home PC protection solution to protect you from both internal threats causing data loss and external threats which can lead to security vulnerabilities. It combines three essential elements into one product:
Internet security (full protection from external viruses, spam and malware). Local backup (back up and recover any and all of your data very quickly using our patented, award-winning, disk-imaging technology) Online backup (keep important financial files, photos and other documents offsite in a heavily secured facility, readily accessible 24 hours a day from any location)
Acronis True Image Home 2009
There are manufacturer specific free versions for downloadWestern Digital Edition
Maxtor MaxBlast 5
Seagate DiscWizard
Other Manufacturers may have free versions of Acronis Imaging that I am not aware of.
for backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
View 7 Replies View Relatedcan I use acronis to reinstall my programes after I install win7
View 1 Replies View RelatedI support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
I got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI had windows 7 home premium free upgraded from Vista home premium.
1. The setup stored in D partition is whether win 7 or Vista. how can i confirm?
2. Recently i was creating system image but due to unavailable more blank dvd i could not completed and i had to interrupt after a single dvd disk. and again next day when i am trying to make system image, i could not getting any option at Backup and Restore folder in control panel. Pls advice.
My system info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4063 Mb
Graphics Card: NVIDIA GeForce GT 130M, 1024 Mb
Hard Drives: C: Total - 466843 MB, Free - 317496 MB; D: Total - 10091 MB, Free - 1408 MB;
Motherboard: Quanta, 361B
Antivirus: Microsoft Security Essentials, Updated and Enabled
I'm not exactly sure how the Backup and Restore feature in Windows 7 work. Does it backup only your operating system and important processes and certain programs, or does it also backup the data on your harddrive such as music, movies etc? Is this feature essentially the same as creating a recovery partition/disk ?
View 2 Replies View RelatedBefore buying a new Windows 7 computer I was using XP. Using the installed Retrospect 6.5 program I backedup all my files to an external hard drive.I can access the hard drive and I can see the backup file but cannot open it to restore my documents and settings.("no program associated with this file extension")The software that came with the Accomdata hard drive will not load in Windows 7.I searched the web for .rbc file" openers" but these all seem to be "commercial" programs (ie, cost money).
View 2 Replies View RelatedUsing the Windows 7 Backup and Restore feature I made a back up of my Documents folder and my Desktop (the only two things on my computer I care about). I did not check off the option "Include a system image of Drives: ---". After the backup completed I clicked on the JOSH-PC (backup file) the window saying "Choose an option below for the selected backup" came up. If I click "Restore my files from this backup" will it automatically overwrite my current Desktop and Documents folder with what is in the back up or will I have a choice as to where on my computer these files are restored to?
View 3 Replies View RelatedWindows 7 SP1 NTFS..I'm trying to create an image as I did with Norton's Ghost in XP and later when I used Norton's Save & Restore in Vista where the entire contents on my C: drive was backed up.In Windows7 Backup & Restore it's a little ambiguous where it saves in steps. I've viewed all options which are: I selected " Create an Image" on the left side of the first dialog box. This gives me these selections which are pre-selected and can not be changed: I don't want to do incremental backups where data is added automatically later. All I want is a one time only backup which creates an image of my entire C: with... Program Files, Registry, System Files, Boot sector, Partition table, etc..
View 5 Replies View RelatedI cannot seem to start the Backup program provided with Windows 7.I go to Control Panel and click on "Backup up your Computer" and nothing happens. What do I have to do to start the Windows 7 Backup program?
View 9 Replies View RelatedHas anyone tried to burn a System Image (with Windows Backup and Restore) onto a BD-R disk?I have 52.5 GB used on my C drive (Windows 7 x64). I have a clean install, with windows updates, and it would be phenomenal if I could use my WH12LS30 (LG) internal blu-ray burner for the System Image creation, since I only have 1 harddrive.When I try a BD-R (and this is my 1st try at System Image burn) , I see "The media needs to be formatted before it can be used...". Just didn't sound right to procede.
View 2 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
Is it possible to successfully backup and restore Windows 7 pro with the XP virtual disc installed with Acronis or similar programs? If so, are any special precautions required?
View 1 Replies View RelatedI cannot open the Win 7 Backup & Restore program, though it has worked OK in the past.I recently installed Spotmau Data Backup Kit and, thinking this might have affected the Windows program, I uninstalled it.
View 2 Replies View RelatedI am running Windows 7 [64 bit]. I have been using Windows backup, but it has stopped working and I am unable to open the programme from the Control Panel.
View 1 Replies View RelatedMy work laptop was being changed from a Dell to a Lenovo and I was using Windows Backup & Restore to backup my important documents and emails. I took a final backup to my external hard drive before handing my old laptop to IT. Once I restored all my files I noticed the following:
1. Some files were not the latest versions, i.e. they were a month old.
2. Some subfolders simply weren't there. I had two subfolder in one of my folders and only one was restored and not the other. I made sure that I restored from the latest backup file.
I am trying to do my weekly back-up with the windows 7 system backup and restore, as I always use, and for some reason it is not longer responding, nor can I open the program to make any changes to the process.
View 7 Replies View Related