Network Backup Via Acronis?

Apr 29, 2011

I have a 2TB in my desktop that i use for backups. I have my desktop backed up onto it and my usb drives. I am using acronis so that i can create an image backup and i am trying to save it onto the network drive.The folder is shared using the advanced settings. When i select the network location in acronis to save the backup it asks for the password, i type in my user name for my desktop but i dont have a password set. It wont let me continue without typing a passcode in. But there is none.Do i have to define a password to use network shares?

View 4 Replies


ADVERTISEMENT

Acronis True Image Home 11 Network Backup Is Slow

Jun 2, 2012

I support a small LAN with 7 Windows 7 64-bit desktops for a local charity.

All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.

For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.

a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.

b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.

c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.

Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.

changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.

View 4 Replies View Related

Does Windows 7 Backup Do Everything Ghost & Acronis Will Do?

Nov 28, 2011

I want to create a full DISK IMAGE, ie: one big file so if I need to restore my whole hard drive, I can. Does Win 7 backup do that?

View 5 Replies View Related

Acronis Backup And Security 2010

Jan 3, 2010

Acronis Backup and Security 2010
  
Quote: Originally Posted by

http://www.acronis.com/homecomputing/products/backup-security/beta/#registration

We are pleased to announce our first Beta release of a brand new product offering, Acronis® Backup and Security 2010. This product bundles Acronis True Image Home 2010, the recently announced Acronis Online Backup and a brand new product - Acronis Internet Security 2010. Together they form the most complete PC protection product on the market, combining full-featured, high-performance Internet security capabilities with both local and online backup and recovery. more: Hard disk drive backup and system recovery tools allow you to instantly restore the entire machine

I don't understand what is the point. Why they need creating AV now...

For those who don't know yet.

It's a new security suite by well known back-up software Acronis.

Acronis Backup and Security 2010:

Acronis Backup & Security 2010 is the first home PC protection solution to protect you from both internal threats causing data loss and external threats which can lead to security vulnerabilities. It combines three essential elements into one product:

Internet security (full protection from external viruses, spam and malware). Local backup (back up and recover any and all of your data very quickly using our patented, award-winning, disk-imaging technology) Online backup (keep important financial files, photos and other documents offsite in a heavily secured facility, readily accessible 24 hours a day from any location)

View 6 Replies View Related

Backup You Hard Drive With Acronis

Sep 1, 2009

Acronis True Image Home 2009

There are manufacturer specific free versions for downloadWestern Digital Edition

Maxtor MaxBlast 5
Seagate DiscWizard

Other Manufacturers may have free versions of Acronis Imaging that I am not aware of.

View 5 Replies View Related

Acronis And Windows Native Backup And Restore?

Jan 1, 2013

When I upgraded to Win 8 from Win 7 I imaged to my 2T usb drive with both of these programs.Is having two dissimilar programs going to cause any troubles?I always depended on Acronis but it seemed to be hard to install this time. They both check out ok with the discs.If 2 backups were a dependable move and did not cause a conflict, I would keep it as is.Should I keep the two or just one?

View 3 Replies View Related

Acronis True Image Home Different From Windows 7 Backup And Restore?

Jan 11, 2012

I have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.

View 1 Replies View Related

Use Windows Backup To Backup To A Network Drive?

Nov 1, 2010

Is there a way to use Windows Backup to backup to a network drive?

View 6 Replies View Related

How To Set Network Backup In Windows 7

Dec 25, 2011

bought the seagate goflex 2TB network hdd and went to set up my acer with windows 7 home premium 64-bit and cant figure out how to set it up to back it up to my network hdd seems like it only has the ability to back up to devices that are physically connected to it. on backing it up via network I know that seagate has software to back it up for you but cant run that on a schedule any help on doing it through windows or with the seagate software on a schedule

View 1 Replies View Related

How To Set Up Backup To Network Storage

Dec 10, 2012

I'm running Windows 7 on my Lenovo T400. I use a wireless router and a LinkSys NAS200 network storage. I'm having a hard time trying to set up backup on the net storage. It worked fine with my XP laptop. I can access the files on the net storage using my browser, so it appears that the network is working, but I haven't been able to map a network drive, and the Windows 7 backup can't find it.

View 4 Replies View Related

Backup To A Network Drive

Feb 1, 2009

I'm using an HP media vault 2210 drive and I keep getting this error (0x8007007B) when I try to backup my C: hard drive onto the network drive.

View 9 Replies View Related

Incremental Backup To Network Share?

Jun 17, 2012

I want to backup my work/study laptop to my home PC every sunday over the network. I have done a full backup once (45GB) and want to make only incremental backups from now on. But I did read it's not possible?Is it true, or did that 'problem' already has been fixed in Windows 7 SP1?If not, it does a full backup every time. How can I make it do only incremental backups?

View 3 Replies View Related

Macrium To Backup To A Network Drive?

Aug 24, 2012

my son set up a backup strategy. He has a Seagate GoFlex 2TB network drive that he planned to do backup with. It comes with software to backup files and folders, but not the system image. He has Windows 7 home which apparently can't do backup to a network drive. I see Macrium is recommended here. Can the free version backup and recover a system image to a network drive?

View 1 Replies View Related

Backup To Network Drive Runs Out Of RAM

Oct 1, 2012

I have been using Win 7 Professional, Backup and Restore sucessfully for almost a year where I have been backing up my computer (250Gbyte Sys Image and 150Gbyte User Folder) to a network dual RAID 2TB each hardrives. A few months ago, these backups failed to complete sucessfully, causing the computer to lock up. At first, I thought it was becuase I left the computer running for too many days but it seemed to lock up every Sun morning which is when I discovered that it coincided with my scheduled backup time. What happens is during backup, the RAM memory slowly increases until it gets into the mid 90%, the computer locks up and displays an error message, not enough memory.I have reduced my backup size from 150Gbyte to 50GByte and I still get the same result, I have completely started over with a new backup setup, selecting the network drive etc. No luck there.

View 1 Replies View Related

Simple Network Backup Options?

Jul 3, 2012

I have 3 desktop PC's and a laptop. One of the desktops is currently setup as a server with 10tb of storage space. All of the computers run on the same network. I would like to be able to automatically backup personal data (photos, downloads, documents) to the server.I tried SyncToy but kept running into problems with my passwords. It is a secure network but there is more than just me using it so my personal computers are all password protected so that other people on the network can't access them.I would like to stay away from "cloud: type storage as I have more than enough storage space on my server, plus I would like to avoid having to transfer files to and from the internet as my bandwidth has a monthly useage cap.

View 6 Replies View Related

Windows 7 Backup Work With Network Drive?

Nov 15, 2011

A friend just got a new laptop running Windows 7 Home Premium. He had an old desktop computer with an external drive for backups. He is thinking of getting a new router with a USB port so that he can connect the external drive to the router and then setup automated backups to that drive from the new laptop. Will the built-in backup program in Windows 7 HP work with a network drive?

View 1 Replies View Related

Microsoft Backup To An Attached NAS Drive On Network?

Nov 21, 2011

I wanted to back up my data files using the supplied backup utility in Win 7 64bit. I run the program and under Backup Destination all I see is my DVD Drive and no way to change to another destination. So under Devices with Removable Storage(1) I see the drive. In my Network locations I created a Share called Backup which I created

View 6 Replies View Related

Backup / Network Error Code Is 0x80070043

Aug 7, 2009

3 PC's all running Windows 7 Ultimate

1 Desktop connection via wire to router

2 Laptops connected via Wireless (Linksys wrg54g)

All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.

Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.

Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials

The error code is 0x80070043

I've tried everything and I'm quite experienced.

Both laptops for all intents and purposes are identical.

View 9 Replies View Related

How To Move Backup From Network External Drive To Pc

Feb 3, 2012

how do i move my backup files from my external hard drive called a network to my pc

View 1 Replies View Related

Acronis Does Not See C: Drive

Jun 25, 2012

I a new HP Pavilion Slimline x64, with Windows 7 Ultimate x64. I installed Acronis 11.0 TI on it to create a backup of my computer to store on my external hardrive.

However, when I go to select the drive to backup, only the external drive, the G: drive, shows up in the list to select. I can see the C: drive from my other computers in my home network, and from the slimline PC, but, Acronis does not see it. Thus, I am unable to create the backup. The C: drive is a Hatachi HS72101CLA630 SATA Disk Drive

I have been to the Acronis forum and tried the suggestions there to uninstall, reinstall Acronis, and still the C: drive does not show up.

I have used this same Acronis on all my other computers to create backups and never had any problem, even with others that have the Windows 7 x64 as well. So I am wondering if anyone here has ever used Acronis and if so, ever had a problem with it not seeing the C: drive to select as the source drive?

View 9 Replies View Related

Windows 7 Restore, Using Acronis?

Jan 21, 2012

this is my first time using Acronis and I don't want to blow it.I'm ready to do a restore to solve my corrupted type and a few related problems.I'm booting from the Acronis Recovery CD.Once I'm in Acronis I have a few questions. I select Recover My Disks.In Archive Selection.I select the back up which is on an external hard drive.Recover whole disk and partitions.Select items to recover.

[code]...

View 7 Replies View Related

Easily Backup & Import Your Wireless Network Settings In Windows 7

Dec 1, 2008

One of the biggest annoyances when setting up wireless networks is remembering the security key and typing it correctly so that you can connect all laptops and netbooks to it. Windows 7 makes it easy to export your wireless settings from one machine to another.
The backup of the wireless networks settings can be easily done from Windows 7, and the settings can be saved to a USB stick, and then the settings can be imported on laptops & netbooks running Windows XP, Windows Vista and Windows 7.

View 0 Replies View Related

Getting Acronis Ti 2010 Running In Windows 7

Sep 5, 2011

After getting ti 2010 working initially in new windows 7 install, I now get the dreaded "program stops working" which appears to be the new BSOD for windows 7. This happens at initial launch and sometimes into point where I select location of backup folder. I've tried reinstalling about a dozen times to no avail and I've even used the cleaner utility with no success. I've tried the following version of true image home 2010: 6053, 7046, 7154 and 7160. Is there a preferred version for windows 7 or should these versions be installed in a certain order? All I'm trying to do is backup an ssd drive (C) to an external 3 tb drive. This should not be a complicated event.

I've also posted this message on Acronis Forum but have not yet received any responses. I hope to do better here.If there's no solution can someone recommend backup software that is very reliable and easy to use. All I want to do is do full backup from ssd drive and data disks to an external usb drive on a regular basis.

View 3 Replies View Related

Creating Acronis 2013 Boot CD?

Feb 16, 2013

I recently upgraded from Acronis 2011 to 2013. Please note that Acronis 2011 boot cd works fine: tested booting with this cd and was able to boot to Acronis 2011. Upgraded recently to Acronis 2013 & made boot cd. Booted with 2013 CD. Acronis logo appeared on acreen & under logo appeared "Loading, please wait". I waited 10 minutes & nothing happened. Problem is reproducable. Also downloaded ISO file from Acronis & made Acronis 2013 boot cd. Booted with Acronis ISO cd & have same problem. Not sure what Acronis did in 2013 version as the 2011 cd boots.

View 2 Replies View Related

Windows Will Not Start After Acronis Image

Jul 14, 2011

Trying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).

View 9 Replies View Related

Trying To Restore Acronis Image Fails?

Sep 8, 2011

for backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.

View 7 Replies View Related

Acronis 11 Back Up And Restore Programs?

Mar 7, 2012

can I use acronis to reinstall my programes after I install win7

View 1 Replies View Related

Restore Windows Backup Image Files From Network Location (XP Machine)

Feb 20, 2012

We are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.

View 8 Replies View Related

Partition Re-size With Acronis, Major Catastrophe?

Dec 2, 2011

I've had a major crisis this morning using Acronis to reclaim an empty 8gb partition.The hdd from left to right, in disk manager was:8Gb Empty (formerly page file) || D:Data 210Gb Data || R:Recovery 80Gb Recovery Using Acronis I expanded the 210gb to include all the 8Gb so now it would be:D:Data 218Gb || R:Recovery 80Gb Recovery After the re-start, in Computer, it says I have D:Data 8Gb plus 80Gb Recovery.Acronis tells me I have D:Data 218Gb plus 80Gb Recovery Disk Manager tells me I have D:Data 8Gb AND D:Data 218Gb plus 80Gb Recovery.The 140Gb plus of files that where on the original D: when at 210Gb have disappeared.Recuva only recognises D: as 8GB.

View 9 Replies View Related

Will Acronis True Image 10 Work With Windows 7

Dec 6, 2011

Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.

View 10 Replies View Related

Acronis Image 2011 Restore To Larger HDD

Nov 28, 2011

I got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved