I'm running Windows 7 on my Lenovo T400. I use a wireless router and a LinkSys NAS200 network storage. I'm having a hard time trying to set up backup on the net storage. It worked fine with my XP laptop. I can access the files on the net storage using my browser, so it appears that the network is working, but I haven't been able to map a network drive, and the Windows 7 backup can't find it.
View 4 RepliesI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
I have just currently installed 1 x 2 TB HDD. Installed Windows 7 64 bit on one. After installing all my basic applications I then decided to create a backup on my spare 1TB allocating 50 gig for the image. The image itself is only 35gig but when I click on create image it runs for a little while then displays the following message:
"There is not enough disk space to create the volume shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. For volumes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)". It seem like the OS does not recognise 1TB hdd
Before uninstalling the operating system all data files were backed up into a separate directory on C. After the o.s. was reloaded I downloaded Windows Live Mail and started to use it. I want to recover the backed up storage folders and the contacts folder and instal them into the new Live Mail. Since I am using the most recent installation, is this creating a problem that will not allow the backed up folders etc. to write into the new folders.
View 3 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI have a NAS drive plugged in to my network switch along with two pcs and couple network printers etc(all wired connection)
The problem i have is that i have mapped a network drive using Z: so i have icon on desktop pointing to NAS box but every time i click it on one PC in particular it asks for username and password even though i click remember details it never will and to make it more annoying every time it launchs it opens the Z: drive explorer window (blank till i put password in) in front of password input box
All other machines i use to access drive local and remote work fine just this one
This machine is also 64bit where as others are 32 if that is relevant and all are Windows 7
I have only about 100GB left on my mirrored RAID on my desktop and I am looking for a NAS. I have been looking at this Synology one and this Buffalo one. I like the Buffalo one because it comes with 12TB and depending on the drives may be cheaper.
View 4 Replies View RelatedOk here's what I am trying to do.
I have two laptops one Windows 7 (7127 x64) the other XP Pro(at the moment), and a Maxtor Family Storage II Network Drive.
I have the same profile setup on all three items.
I want all of the files in my library that I have on my Windows 7 machine to be copied over to the Maxtor Network drive.
Then I want the XP machine to copy the files from the Network to its self using the Offline option in XP.
Im trying to have the Maxtor drive keep the most resent copy of any file I modify on either laptop. That way when I take one of them with me when I return to my home it will sync up with the Maxtor drive and update those files always keeping the newest copy.
I would like to do this without having to add any third party software if I can. I have been trying for days to get this to work and it fails to copy any files to any of the other drives. If someone has a link to a Tutorial or anything that would help me get this that would be great.
I have a HP Pavilion with Windows 7 Premium 64, and have my computer back up daily, with weekly system image back ups using the Windows back up utility. This backs up to a DLink DNS 323 network storage device. Last Friday my hard drive failed, and I didn't feel too bad becuase of my back ups. Yesterday after replacing the hard drive I tried using the System Repair Disc to restore the System Image, but couldn't locate anything on the network to restore. I checked with DLink support and they said this is a Windows issue. Hoping I can get some ideas how to proceed and get my data on the new hard drive. THe DLink site suggested that I try everything out before I need it to make sure it all works as planned. I would have no idea how to try out the System Repair Disc and restore the System Image without having a blank hard drive or jeopardizing the data on my current drive.
View 9 Replies View RelatedI have a network storage drive that has seen its last day but I still have the icon under my computer when I try to disconnect from it it tells me the drive does not exist.
View 1 Replies View RelatedI have reformatted and installed a minimal version of Windows 7 but have yet to stop this thing from maintaining its hold on my network. After some 20 hours a day for nearly a month, it has taken its toll on my family. My son's new laptop for Xmas is now infected too. We will fix that very soon tho. Please guide me on how to proceed with this laptop for now. They have already wiped out my bank account once.
View 4 Replies View RelatedKeyboard and mouse drivers unaffected.USB Mass storage device properties messagewith driver check on:"Windows cannot verify the digital signature for the drivers required for this device."with driver check off:Tells me drivers are corrupt or missing.Search show diver where it should be:C:\Windows\System32\drivers\usbstor.sys (also usbfilter.sys).Used the HP Recovery Manager to restore factory setting for USBStor.sys, it indicates it is successful but no changeon reboot, still cannot use flash drives, SD cards, external HDs. Units work find on my laptop.Called HP 4 times, after extensive troubleshooting each time, following their instructions, go to hp.com/go/instant, get screen saying request has been received. Each time tech tells me he cannot find my request.After a while, read 2 hours, told they need to talk to supervisor, will call me back, KISS OF DEATH, never hear from them.
View 2 Replies View Relatedhow to handle USB removable media inside camera.With camera there is no "Safely remove hardware and eject media" option.When Photo camera is connected, a new camera device is installed and GUI window is opened with option to browse or copy photos. But there is no removable storage devise eject button on notification area. The USB removable Storage devise is also present on File Manager Computer left panel but again, there is no mouse right button eject option as normally with removable storage devices. I have checked in on several computers. How to understand. I don't believe that it's camera specific but Camera is Canon S95.
View 9 Replies View Relatedbought the seagate goflex 2TB network hdd and went to set up my acer with windows 7 home premium 64-bit and cant figure out how to set it up to back it up to my network hdd seems like it only has the ability to back up to devices that are physically connected to it. on backing it up via network I know that seagate has software to back it up for you but cant run that on a schedule any help on doing it through windows or with the seagate software on a schedule
View 1 Replies View RelatedI have a 2TB in my desktop that i use for backups. I have my desktop backed up onto it and my usb drives. I am using acronis so that i can create an image backup and i am trying to save it onto the network drive.The folder is shared using the advanced settings. When i select the network location in acronis to save the backup it asks for the password, i type in my user name for my desktop but i dont have a password set. It wont let me continue without typing a passcode in. But there is none.Do i have to define a password to use network shares?
View 4 Replies View RelatedI'm using an HP media vault 2210 drive and I keep getting this error (0x8007007B) when I try to backup my C: hard drive onto the network drive.
View 9 Replies View RelatedI want to backup my work/study laptop to my home PC every sunday over the network. I have done a full backup once (45GB) and want to make only incremental backups from now on. But I did read it's not possible?Is it true, or did that 'problem' already has been fixed in Windows 7 SP1?If not, it does a full backup every time. How can I make it do only incremental backups?
View 3 Replies View Relatedmy son set up a backup strategy. He has a Seagate GoFlex 2TB network drive that he planned to do backup with. It comes with software to backup files and folders, but not the system image. He has Windows 7 home which apparently can't do backup to a network drive. I see Macrium is recommended here. Can the free version backup and recover a system image to a network drive?
View 1 Replies View RelatedI have been using Win 7 Professional, Backup and Restore sucessfully for almost a year where I have been backing up my computer (250Gbyte Sys Image and 150Gbyte User Folder) to a network dual RAID 2TB each hardrives. A few months ago, these backups failed to complete sucessfully, causing the computer to lock up. At first, I thought it was becuase I left the computer running for too many days but it seemed to lock up every Sun morning which is when I discovered that it coincided with my scheduled backup time. What happens is during backup, the RAM memory slowly increases until it gets into the mid 90%, the computer locks up and displays an error message, not enough memory.I have reduced my backup size from 150Gbyte to 50GByte and I still get the same result, I have completely started over with a new backup setup, selecting the network drive etc. No luck there.
View 1 Replies View RelatedI have 3 desktop PC's and a laptop. One of the desktops is currently setup as a server with 10tb of storage space. All of the computers run on the same network. I would like to be able to automatically backup personal data (photos, downloads, documents) to the server.I tried SyncToy but kept running into problems with my passwords. It is a secure network but there is more than just me using it so my personal computers are all password protected so that other people on the network can't access them.I would like to stay away from "cloud: type storage as I have more than enough storage space on my server, plus I would like to avoid having to transfer files to and from the internet as my bandwidth has a monthly useage cap.
View 6 Replies View RelatedA friend just got a new laptop running Windows 7 Home Premium. He had an old desktop computer with an external drive for backups. He is thinking of getting a new router with a USB port so that he can connect the external drive to the router and then setup automated backups to that drive from the new laptop. Will the built-in backup program in Windows 7 HP work with a network drive?
View 1 Replies View RelatedI wanted to back up my data files using the supplied backup utility in Win 7 64bit. I run the program and under Backup Destination all I see is my DVD Drive and no way to change to another destination. So under Devices with Removable Storage(1) I see the drive. In my Network locations I created a Share called Backup which I created
View 6 Replies View Related 3 PC's all running Windows 7 Ultimate
1 Desktop connection via wire to router
2 Laptops connected via Wireless (Linksys wrg54g)
All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.
Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.
Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials
The error code is 0x80070043
I've tried everything and I'm quite experienced.
Both laptops for all intents and purposes are identical.
how do i move my backup files from my external hard drive called a network to my pc
View 1 Replies View RelatedOne of the biggest annoyances when setting up wireless networks is remembering the security key and typing it correctly so that you can connect all laptops and netbooks to it. Windows 7 makes it easy to export your wireless settings from one machine to another.
The backup of the wireless networks settings can be easily done from Windows 7, and the settings can be saved to a USB stick, and then the settings can be imported on laptops & netbooks running Windows XP, Windows Vista and Windows 7.
I support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
We are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.
View 8 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
View 13 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View Related