I got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
I know both programs have been discussed before but what are the pros and cons of both Macrium and the latest version of Acronis (2011)? or are they pretty equal? I don't mind spending a few bucks on Acronis especially since I still got gift cards form Xmas Acronis looks like it has a "prettier" UI and really I would prefer to have purchase a disk rather that a download but that's not a deal breaker. I was also looking a Norton Ghost 15 but have read some really bad reviews.
for backups of my main OS (in my signature) I have acronis TIH create a single image full backup daily to a different drive. Weekly a single image backup is created and saved on a different drive. Because my SSDs are in RAID0, every few weeks I make a system image backup using Acronis (outside of the daily and weekly backups), clean/all the SSDs to put everything back to 0 on the drives, then restore my installation. It makes a significant performance increase for sure.This last go around a week ago, I did the usual but could not restore no matter what I did. I bought the new version of acronis, the plus pack, unplugged all the other drives, etc etc etc that acronis told me to do to try to fix the error I was getting restoring any backups.Finally what I did was take an old backup, transfer it over the network to a different computer, bought acronis TIH again (ridiculous) and was able to clone it to a drive, plug the drive back into my main rig, boot acronis from a USB drive and clone that installation to the SSD raid setup. The only problem was, the backup I was able to use was from 7-10. I'm now trying to convert the images which would not restore to VHD to boot from the bootmgr screen of the currently restored (7-10) installation.Every tutorial I see only deals with creating a new .vhd to install windows to and boot.
I have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
Trying to install Win 7 Ent. 32 bit on a custom built P4 2.6GHz, 768mb RAM.Windows will not start after Acronis image or via just windows install due to error OxO.Searched around but most people just say to turn on the E.. data transfer thing in the BIOS but that is already on (IDE HDD BTW).
Is anyone using Acronis True Image v. 10 with Windows 7? I have used TI 10 for a long time with XP computers and found it satisfactory. However I read postings that suggets TI may not work with Windows 7.
I have been using Windows 7 backup and restore but never tested out the �restore� part and frankly don�t trust it. Another problem is that I don�t have enough room (so says the MS backup program) to backup a 640 GB system disk to a empty 640 GB disk! On top of that, I am not backing everything up and the system disk has some 105 GBs still available!
I support a small LAN with 7 Windows 7 64-bit desktops for a local charity.
All the desktops have Acronis True Image Home 11 (ATI11) installed and are configures as a HomeGroup. I have been doing an incremental image backup over the network using ATI11 to one of the desktops but lately speed of the backups has become unacceptable.
For a specific example, Two of the desktops are Core I7 machines with GBit network interfaces connected through a GBit switch.
a) If I backup one to the other using ATI11 the backup will take 4-6 hours with network utilization at 3-5%.
b) If I backup the SAME system to its secondary HDD using ATI11 (a local backup) the backup takes about 2 hours.
c) If I then use a simple COPY command to copy the large ATI11 TIB backup file (30-50GB) from the SAME system to the SAME target system the network utilization varies from 25%-60% and the copy takes a, relatively speaking, small amount of time.
Note I get the same results for source systems which only have a 100MB network card except that during the COPY test they use 80-90% of the available network speed.
changing the network cards settings, IPV4 Checksum Offload for example. I tried that and it immediately "broke" the HomeGroup network connection. Question: Why will ATI11 not use more of the available network speed? Neither the source system nor the target system is CPU bound during the ATI11 backup, network or local. Aside from Norton Antivirus there are no other non-MS apps running. Disk Queue Length is not excessive.
this is my first time using Acronis and I don't want to blow it.I'm ready to do a restore to solve my corrupted type and a few related problems.I'm booting from the Acronis Recovery CD.Once I'm in Acronis I have a few questions. I select Recover My Disks.In Archive Selection.I select the back up which is on an external hard drive.Recover whole disk and partitions.Select items to recover.
Alright, I did a backup image in Windows 7 Ultimate 64-bit from a 500GB drive. I then took that out and put in a new Barracuda 3TB sata3 drive. After it was done restoring the image I extended the volume and of course it only gave me 2TB of space. So after reading a bit I needed to use Seagates disc wizard to format it to accept and show 3TB (2.79 useable) space which I did by hooking it up as an extra drive in another computer. Now my question is when I do hook it up in the new computer and put the image on again the process wants to automatically format the drive and in doing so I am afraid I will end up with the same 2TB's of space after extending the volume again.
I'm using Acronis True Image Home 2012 to do Directory and System backup. I have 6 different backup job and most of them are working fine but on a particular file system with pictures my system crash every time !I have multiple dump of the crash (including a full dump), I ran a jcgriff2 (in attachment) and a perfmon /report too[CODE]
When I upgraded to Win 8 from Win 7 I imaged to my 2T usb drive with both of these programs.Is having two dissimilar programs going to cause any troubles?I always depended on Acronis but it seemed to be hard to install this time. They both check out ok with the discs.If 2 backups were a dependable move and did not cause a conflict, I would keep it as is.Should I keep the two or just one?
My PC is running W7 Pro 64bit with a single drive in two partitions (C: contains the OS and all software; D: is small and used only for some storage) there is also the obligatory hidden recovery partition set up by W7 on installation. For security I use the MS firewall, Microsoft Security Essentials, Spybot S&D (Teatimer off) and Spyware Blaster.
I have not tried or used Try&Decide (or any other ATI utility) to date but have a bit of software I should like to try out. As a result I attempted to start the utility today but all I get is the title message ("Failed to Start Try&Decide") at all attempts. I have looked in various places for further information as to the cause to no avail and there is nothing in the Help file to assist me, I have found nothing on the Acronis forums and my one month support expired in March - unused!
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
I am running windows 7 home premium, upgraded from Vista. This is a Dell inspiron 1525. I have a recovery partition on the hard drive (E). When I startup, choose F8, choose "repair my computer" I have no option to restore from the recovery partition. There is no "dell data safe / recovery" option. I have heard this is due to my upgrading to win7. Two questions: Am I right in believing that the problem was caused from the upgrade? (even though the recovery partition was untouched).....2nd Question: if I first format the C: drive will it cure the problem?
I am installing Mac on my PC and that requires me to reformat and wipe my partitions. I made a backup of my whole windows partition and am storing that on a separate PC. When I install Mac I will have 2 partitions.Here is my question:Is there any way that I can restore my Windows backup (VHD) to a specific partition on my drive without wiping my whole drive? I want to set up a dual boot with Mac
i have changed my hard disk on my dell inspiron 1440 but and i have install windows 7 ultimate x64, but when i activate my windows, my laptop does not boot. its probably about my bios since i have install a new hard disk and i need to restore my factory image
I get a failure notice when I try to restore from the image saying that I don't have a valid drive to restore to. I am imaging from a 500 Gig and trying to restroe to a 750 Gig that I am putting into to replace the 500.
Ghost 14 is not compatible with Windows 7.
Just a little follow-up info:
I am using the same computer only trying to upgrade the HD.
I am using Windows 7 Pro RTM (Legitly).
I don't want to go through having to rebuild everything from scratch again.
I am putting the 500 in my camera monitoring system.
I have taken the following 3 steps so far: 1) I've created identical partitions on the 750 to match the 500 2) I've deleted all partitions 3) I have ghosted the Windows 7 partitions to these partitions (setup old Vista Drive and imaged the Windows 7 partitions).
No luck so far.
I am getting a failure notice while trying to restore to a new HD (going from a 500 to a 750).
The message tells me that I don't have a valid HD to restore to.
The image is on a 1.5 TB and the primary disk is the 750.
At the moment I have Win7 installed on my C drive which is a 1.5TB Samsung, it has two partitions 200GB for the OS and programs and the rest for storage.I bought a Momentus XT to replace the OS C: partition. I have tried a few programs to back-up (image) the C drive to a 3rd drive, unplug my C drive then reboot with the Win7 installation disc and run startup repair. Now at this point I get error's saying I can't run the image restore in this environment then it tells me to reboot from the disc, then basically do what I just did. So I'm stuck in a loop regarding the image restore. Secondly I tried to use Acronis disk director suite to clone the C drive to the new XT drive, this completes successfully. I Unplug my C drive, leaving just the XT in, I boot up, I get a boot error and am told to run startup repair via the installation disc which I do, after doing so it boots past the windows sign, then Acronis does some final checks as it's about to show the login screen, I get blue screened for a split second then the computer reboots. I ran startup repair again, the startup repair is stuck on "attempting repairs" for 30+ mins. So my questions are, where am I going wrong with the image restoration. I've tried saving the image backup to the new drive and to a spare drive. It refuses to restore from both these locations. The error message tells me to do what I did in the first place, and when I do it again it's the same result. With directly cloning the drive,I have obvious boot problems, I can only assume this is to do with the OS thinking it's booting from drive C, what I'm confused about is, wouldn't it be labelled as drive C if the 1.5TB drive is unplugged?
I recently got a new hard drive (Seagate Mometus XT 500GB) to replace the old one (320GB) i had for my laptop. I had created an image backup using Windows 7. I restored the image to my new hard drive using my recovery CD to the new hard drive and everything was working just fine. Windows loaded up quicker and it was faster than before. Now when i open up My Computer and go to properties of the new hard drive, the capacity comes up as 287, which is my old one. It seems Windows does not detect the new hard drive.
I have A brand new hard drive.I also have an image of win 7.I was using the usb dvd tool,but on this computer the Setup from USB freezes at Starting windows.I also have a fresh installation of WIN7 in a VM in my netbook.How would i Transfer it to my HDD?
I am looking for a software that can take a full image of laptop and easy to restore. Right now, my laptop started rebooting all at a sudden and quite commonly seeing blue screens. I have so many installations running on this laptop related to school , work the connections , vpn and all . I am looking for a easy software in the case of laptop crash, i am planning to buy a new laptop soon but installing all this softwares and all is hectic job and some of them i got installed at previous work place and fortunate enough to still use them.
I also have Win 7 pro installed currently which i will be resetting to windows 7 home after i got new laptop. Basically i am looking for a software which can help to take complete image of my laptop , and when i buy a new one this software should help me to restore everything and resemble 100% to old one so that i wont loss any thing and network permisisons and all.
Been awhile since I've been around here. I'm stuck with a new problem. My desktop's OS hard drive crashed/is crashing. After testing several pieces of hardware and reseating numerous items, I got lucky and was able to boot into safe mode, once. My event viewer is full of disk errors. Pages and pages of disk errors. *Side note: Sure would've been nice if Windows would have said something */End Side note* So I have a Windows System Image and Windows Backup on a secondary drive that appears healthy. But I'm just curious what I'm looking at when my new hard drive gets here.Has anyone ever used the Windows 7 Image Backup/Restore utility? Can you use the image on a different hard drive or just when repairing the original? Will my programs be saved or just data? Just curious questions. All of my Google searches are bringing up reviews about the utility from the Win 7 RC days so I'm not real sure what I'm getting myself into here.
I am trying to restore my Dell E6510 Windows 7 64-bit Pro. laptop from a image created by Windows backup that is located on a share on a network drive. Using windows explorer, I can view the image folder. I have not renamed or moved the folder. When I run the Windows restore process, restore does not automaticly find the image so I click on the network button, type in the network share and type in the correct user and password. I receive the message "network share cannot be found. code 0x800704cf"
I am Last night when I get home go to start computer and there is a error about missing dll file, then aas I click the error more missing file errors keep coming up, gets progressively worse until PC does not start windows. Ok, that's cool, I have backup and disk image on another drive in computer, no problem right, WRONG!!!
So pop in the windows 7 disk, go to restore disk image, error!!! Got a few errors while trying once I got one when I checked of not to include one of the disk, the one I keep getting is that there is not enough space on drive for restore. Now the disk the image is on is 150 GB, the disk trying to put it on is 500 GB, so why the problem???
So keep searching on my laptop and find a suggestion to do diskpart-clean. Go through every suggestion I found to use diskpart such as clean. Still not working. I install Windows 7 on the drive which works, install backup files and is there. But I want the image to restore. So in the new install I cant get it to do a image restore, so I try from Windows 7 CD again, Fail.
I had a hard drive fail, and I want to recover my recent backup/image from that failed drive, an image which was created with the Win 7 backup tool found in Control Panel. It's on an external hard drive. I of course want to recover it to a drive known to be good, such as the one that's in my computer now.If I have XP on said drive, can I make a partition and restore the 7 image to that new partition? Or would I not be able/allowed to have two Windows OS-es on the same drive, even on different partitions? It's XP Home and 7 Home Premium x64.
