Installing Windows 7 Image To A Larger 3TB Drive?
May 20, 2012
Alright, I did a backup image in Windows 7 Ultimate 64-bit from a 500GB drive. I then took that out and put in a new Barracuda 3TB sata3 drive. After it was done restoring the image I extended the volume and of course it only gave me 2TB of space. So after reading a bit I needed to use Seagates disc wizard to format it to accept and show 3TB (2.79 useable) space which I did by hooking it up as an extra drive in another computer. Now my question is when I do hook it up in the new computer and put the image on again the process wants to automatically format the drive and in doing so I am afraid I will end up with the same 2TB's of space after extending the volume again.
View 8 Replies
ADVERTISEMENT
Oct 15, 2012
Is this possible?
View 3 Replies
View Related
Aug 19, 2012
I am require this driver .I get this driver for window 7.
View 1 Replies
View Related
Nov 28, 2011
I got 2 partitions and the 1st partition is bigger then the 2nd. So when I try to restore my backup OS from the smaller partition to the bigger one it does not load properly! My Os is windows 7 32bit.It loads and say preparing your desktop then the desktop is blue and no icons, nothing. Just blank! I restart and enter into safe mode and still nothing just a blue screen, where you can move the mouse and press alt-del to get task manger loader but that is it.I am wondering that it might be that you can restore your image by Acronis on drives that are bigger or smaller. You need to partition it.So is this the reason why windows will not load properly cause I am restoring to a bigger partition? I tried many times and failed. Ironically when I use the same size partition image it restores perfectly so not sure what is this?
View 9 Replies
View Related
Nov 3, 2010
A few weeks ago I noticed that my Aronis TI 2011 images were getting larger each day. So I logged the amount of used space on my C drive from Oct 24 to Nov 1. The used space grew from 45.5 GB to 59 Gb in that time. It used to be less than 40 Gb for the longest time. I have not installed anything that would account for this growth, especially a few GB each day. Have scanned with MSE and Mal software removal tool and have found nothing. What should I do? Is there a log somewhere I could see where his growth might be coming from?
View 8 Replies
View Related
Feb 2, 2013
I just swapped out a failing 1Tb samsung HDD to a WD Black Caviar (the noisiest drive EVER!) and the additional drive space is unallocated, when I access disk management I see the drive, System, C, D, and 931 Gb unallocated. What to do with the unallocated space?
View 6 Replies
View Related
Jan 12, 2013
Got a new 2TB hard drive (f and have it installed, obviously showing up as an empty drive at the moment. Is it possible to use my old 320GB (c drive as boot only but still have the new one as the primary drive, programs install there, download there etc? PC is a homebuild running Win 7 64bit.
View 9 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB,
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB
View 3 Replies
View Related
Oct 25, 2011
So I have a 64GB SSD that is too full to do an iPhone update... decided to get a 128GB SSD.I have DriveImage XML, to copy a complete image of the C drive onto the new, larger drive.Now I have both drives plugged in, have initialized the new drive... But to create a 'simple volume' under disk management, I have to pick a drive letter. The issue is that I want the new drive to replace the C drive, but 'C' isn't available as an option.So, what do I do?Do I create a volume with, say, letter J? Then copy over the image... then unplug the old C drive and plug the J drive into the same cables? And then reassign the J drive as C? Or how can I boot onto the new drive?
View 5 Replies
View Related
Oct 7, 2010
I have my O/S disk ( C: ) sepeated from My Applications disc ( D: ) . Then I store all my Data on other Harddrives.I want to upgrade my applications disk to a larger capacity, but I worry about maintaining the integrity of Disknames (IDs) so I won't have to re-install all my Applications again.My plan is to make an Image or Clone of the Apps disc on the New HD and then change the Name of the Apps disk ( D: ) to new name ( Z: ) . Then I would need to reboot, before naming the New Apps disc as the new D:the effect of rebooting without any Apps disc at all.. and would everything work after renaming the new Disc back to D: and making a final reboot?
View 6 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Aug 3, 2011
While I was installing an OEM 64-bit version of Windows 7 I got the following pop-up message during the "completing installation" step:
setup.exe - Bad image C:Windowssystem32sppc.dll is either not designed to run on windows or it contains a error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I hit ok, and it popped up again... and again... etc. So finally I tried to cancel the Install via the standard red x routine. Upon which i received a message saying that installation cannot be cancelled at this point... blah blah"
So being stuck and unable to finish or cancel the installation, I went for the good old turn off the computer method. Then I started fresh reformatting the drive and all. I had to leave the location I was at unfortunately while it was at "extracting files 52%" We'll see what's showing when I arrive in the morning.
Now, the question(s):
What causes this message to appear? And obviously, how do I fix/prevent it?
If it's due to bad media, how do I get a replacement copy? (seeing as it's OEM and thus I am technically responsible for support as I am the system builder)
Finally, the disclaimer:
Yes, I do know the difference between OEM and Retail. Yes, I did legitimately purchase the installation media & key. Yes, I am reselling this system to an end user; it is NOT for personal use. No, I did not run the OPK prior to using this software; I did not see the point as in this particular case I am personally setting up the machine for the client (plugging it in, installing software, registering & activating that software as well as the OS, etc.) Yes, I did look on this forum, as well as others, including window's own, and all over "the Google" to no avail
View 9 Replies
View Related
Oct 1, 2012
I need to install Windows 7 on multiple computers (over 20), overwriting the original install with a customized one with added software. I would use a boot time imaging software to simply load the image but I am concerned about the license key for each computer.Could I update the cloned license information with the license I copied from each computer beforehand? Either by getting it from the documentation that came with the computer or by using a software tool to extract the key from the Windows 7 install that was originally on the computer before I overwrite it with the clone image.
View 5 Replies
View Related
May 4, 2012
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
View 4 Replies
View Related
Dec 12, 2012
I just installed a ssd harddrive. Windows (7) backup discs ran fine. System image restore seems to have worked fine, only thing is programs are not showing up. This is my first time doing this and everthing I read, prior to, lead me to believe the programs would be included in the system image.
View 5 Replies
View Related
Aug 20, 2012
I am trying to set up a MDT Deployment that will install Win 7 and MS Office 2010. With the Win 7 install I am able to have the system ask for the Windows Key after the install has completed. I would like to do the same for MS Office. I am going to be using this deployment tool for every new computer we get going forward and don't want to have to update my deployment every time I run one. I simply would like to deploy the image and then enter the Product key and activate it.
View 2 Replies
View Related
Sep 17, 2012
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies
View Related
Apr 22, 2012
Yesterday I installed Microsoft Digital Image Suite 2006 for a graphic editor friend of mine to do some work. Everything installed with out an issue then Started getting BSODs one after the other after the other. This machine was troubleshooted before but Im back again. Im attaching the *.DMPs for analysis. I removed the program and Still had about 6 additional BSODS.
OS Win 7 Ultimate x64
CPU AMD Athlon II X3 Processor
Motherboard Gigabyte MA770T-UD3
Memory ADATA XPG Gaming Series 4GB (2 x 2GB)
Graphics Card(s) EVGA Geforce 8400GS
Sound Card TC Electronic Konnekt 8
Monitor(s) Displays Dell 15in
PSU RAIDMAX RX-500AF
Case COOLER MASTER Elite RC-330-KKR1
Cooling COOLER MASTER Hyper TX3 RR-910-HTX3-G1
View 2 Replies
View Related
Feb 14, 2010
Is M/S Digital Imagesuite 10
compatible with Win 7?. Mine never gets past the startup screen F1 and F12 at bottom.
Answer:-
Microsoft Digital Imagesuite 10 supported Platforms are: Windows 98 / 2000 / Me / XP. However it runs on Windows 7.
If Microsoft Digital Imagesuite 10 hangs during startup visit this article.
http://support.microsoft.com/?kbid=894723
If your computer doesn't get past POST(Power On Self Test) screen, it is more likely a hardware related problem.
View 1 Replies
View Related
Oct 11, 2012
On hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies
View Related
Jun 18, 2011
I recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.
I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.
When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.
What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.
Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?
View 4 Replies
View Related
Mar 2, 2011
(Drive Image XML) compatible with windows 7 Home Premium. I am trying to back up my system according to the pre-directions for virus removal.
View 4 Replies
View Related
Mar 18, 2012
I had a hard drive fail, and I want to recover my recent backup/image from that failed drive, an image which was created with the Win 7 backup tool found in Control Panel. It's on an external hard drive. I of course want to recover it to a drive known to be good, such as the one that's in my computer now.If I have XP on said drive, can I make a partition and restore the 7 image to that new partition? Or would I not be able/allowed to have two Windows OS-es on the same drive, even on different partitions? It's XP Home and 7 Home Premium x64.
View 4 Replies
View Related
Sep 3, 2012
I have a 1TB drive that partitioned with 120gb system and rest is a non primary/non boot data partition volume... I've never used windows 7 create system image, but want to. When I try to create a system image it insist on backing up both drives. I don't see how to deselect the data drive. Is this because I have installed something system related. on the data drive? And Finally, how will recovery of a system image works if I get a blue screen, do I need to install windows 7 again first or have a repair CD? I noticed when I started a create system image it asked me for the destination drive, no exact path on the drive, does the image have be created on the root of the destination drive?
View 1 Replies
View Related
Oct 13, 2012
My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
View 1 Replies
View Related
Apr 29, 2012
SSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 Replies
View Related
Sep 24, 2012
I have a compac (HP) laptop (CQ61-41us notebook), running WIN7 home premium, 64 bit. Aside from the normal file backup via the western digital software, I have several windows 7 generated iso images of my laptop stored on my external WD drive. Using windows repair disk, my computer does not recognize the external drive to access the disk images. It just asks to insert the last disk into optical drive. My images are on a folder on my external drive. There is no option to navigate to it! This is the first time I've needed to restore an image, and I can't access them! This should be an easy operation that could be started in a few minutes. I have been screwing around with this for more than 24 hours!
View 3 Replies
View Related
Dec 27, 2012
how to create windows image bootable partion in my hard drive
View 1 Replies
View Related
Mar 18, 2012
I have an old Dell Dimension 5100 running XP with a 150GB HD and only 1GB of RAM. I'm going to check with Dell if the system will support Windows 7 as know I can upgrade the RAM to 4GB which I believe is the min needed for Win 7. Assuming this is the case I am wondering if I can also upgrade the HD to a 320GB one I have spare. My cheapest route to upgrade is I can access a cheap achademic upgrade from XP to Win 7 Pro.
So the question is how do I get from XP on one drive to Win 7 on the other drive since the upgrade only operates on the drive with XP installed. I can either:
a) Do a clean install on Windows 7 on the XP HD and then do something fancy to move the whole thing to the new HD?
b) Do the fancy transfer first and then upgrade to Windows 7?
I suspect the answer will be to do the clean install first and then use something like System image and restore tools in Windows 7 to transfer over? I did find the tutorial on using sysprep in Windows 7, but not sure if that is in additional to the system image method or a differnt method.
View 5 Replies
View Related
Jul 27, 2012
I originally did a fresh install of Windows 7 onto an SSD, which has now become too small. Using the Windows 7 utility today I created a system image onto an external standard hard drive. I'd like to restore the image onto my new, larger SSD. Is preparation such as alignment needed, or does going from one SSD to another take care of that? I'm assuming I can resize the active partition using Disk Management afterwards.
View 5 Replies
View Related
