While I was installing an OEM 64-bit version of Windows 7 I got the following pop-up message during the "completing installation" step:
setup.exe - Bad image C:Windowssystem32sppc.dll is either not designed to run on windows or it contains a error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I hit ok, and it popped up again... and again... etc. So finally I tried to cancel the Install via the standard red x routine. Upon which i received a message saying that installation cannot be cancelled at this point... blah blah"
So being stuck and unable to finish or cancel the installation, I went for the good old turn off the computer method. Then I started fresh reformatting the drive and all. I had to leave the location I was at unfortunately while it was at "extracting files 52%" We'll see what's showing when I arrive in the morning.
Now, the question(s):
What causes this message to appear? And obviously, how do I fix/prevent it?
If it's due to bad media, how do I get a replacement copy? (seeing as it's OEM and thus I am technically responsible for support as I am the system builder)
Finally, the disclaimer:
Yes, I do know the difference between OEM and Retail. Yes, I did legitimately purchase the installation media & key. Yes, I am reselling this system to an end user; it is NOT for personal use. No, I did not run the OPK prior to using this software; I did not see the point as in this particular case I am personally setting up the machine for the client (plugging it in, installing software, registering & activating that software as well as the OS, etc.) Yes, I did look on this forum, as well as others, including window's own, and all over "the Google" to no avail
My main desktop PC having HDD only setup, then I bought a Intel 320 Series 80GB SSD and migrated my system over to it using Intel's software, then made the HDD a storage drive due to limited space on my SSD. Fast forward to now. My SSD is basically dead from a firmware bug that makes data irrecoverable without some special algorithm that professional data recovery centers have. Oddly enough, it came back to life, I rebooted, imaged whole system including both drives. I had been doing this, but most recent backup was a month prior, so I stood to lose quite a bit that I had done over that month stretch. The new image went great. I was saved and so excited. Apparently that was a one and done deal, as it never has worked since then.
I intend on ordering new (bigger) SSD to replace it, keeping setup the same, as new SSD will still be too small. Now from my understanding, I can restore my image to both drives and everything will be as it it never left? Is this correct? How about things like partition alignment or special SSD configuration that I had to do some of when I first configured it as so? Is that carried over since it would be in the image or am I good to go once restore is complete? Also, in meantime, I have another SSD in box, but it is smaller. Is it worthwhile to use that temporarily, then migrate system over to new SSD when I get it? Or should I just wait until I get new SSD and restore current image to that?
One of my drives in raid0 crashed and fortunately I had windows 7 x64 backup activated and running daily. After recreating the array with the remaining drives, I tried to restore from the external usb drive but it didn't work. Apparently the problem is that I had been running "file backup" and not "image backup". Probably because when I configured backup for the first time, it asked to back up all my drives which was not possible and not needed so didn't check the image backup button.
Now the backup set is visible only from within windows (I set Windows 7 again up) but NOT from the restore part of Windows 7 setup / recovery disk. Files inside the backup set are not .vhd but zipfiles. All my c: drive files actually ARE inside the backup set, but running restore will restore all the crap folders (like c: vidia) except from the system folders like c:windows, c:program files (and x86), c:programdata etc.
Any way to restore these? I am thinking of the possibility of somehow restoring all the files and running windows repair on top of this to actually make c:drive bootable again. My users folder is not affected as I had moved it to d: but this presents the additional challenge of being able to actually make the system see the users folder....
I was wondering if it was possible to image one device after it's been setup and re-image the other 24 tablets with the created image. I know its *possible* but will there be issues with the Windows 7 key/activation process? Each device has an OEM key/product ID in place and I don't want to wipe it if at all possible. I intend to use Macrium Reflect Free Edition, are there better options for what I'm trying to do? We'd also be using the original image as an emergency restore just in-case a tech in the field decides to get into some system aspects that they ought not have access to (taken care of but some of our guys are fairly crafty).
Alright, I did a backup image in Windows 7 Ultimate 64-bit from a 500GB drive. I then took that out and put in a new Barracuda 3TB sata3 drive. After it was done restoring the image I extended the volume and of course it only gave me 2TB of space. So after reading a bit I needed to use Seagates disc wizard to format it to accept and show 3TB (2.79 useable) space which I did by hooking it up as an extra drive in another computer. Now my question is when I do hook it up in the new computer and put the image on again the process wants to automatically format the drive and in doing so I am afraid I will end up with the same 2TB's of space after extending the volume again.
I need to install Windows 7 on multiple computers (over 20), overwriting the original install with a customized one with added software. I would use a boot time imaging software to simply load the image but I am concerned about the license key for each computer.Could I update the cloned license information with the license I copied from each computer beforehand? Either by getting it from the documentation that came with the computer or by using a software tool to extract the key from the Windows 7 install that was originally on the computer before I overwrite it with the clone image.
I have a setup running with 1 physical SATA disk divided in two partitions (C,D). Tomorrow i am receiving an 120GB SSD. I am planning on disconnecting the HDD and plugging the SSD with AHCI enabled in the bios and performing a clean install.I need help for the steps after that, what is going to happen when i plug in the HDD in the 2nd SATA port? Will windows boot from the SSD and see the two partitions as D & E? If this is the case can i merge the 2 partitions after that and not lose any data? The purpose as you can see is to install fresh Win 7 on the SSD and plug in the HDD after that for storage purposes only but want 1 partition to it.
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
I need to install either windows XP or windows 7 on my USB stick so I can boot my computer from the USB and use it like a normal installation. Articles I read tell you how to install Windows on a USB but not how to allow your computer to boot from the USB like it would be a HDD. I know how to set up my BIOS and I don't need an explanation in that respect I just need a step by step guide or at least a good guide on how to install either XP or 7 onto a USB, not from I've done that 1,000,000 times.
I just installed a ssd harddrive. Windows (7) backup discs ran fine. System image restore seems to have worked fine, only thing is programs are not showing up. This is my first time doing this and everthing I read, prior to, lead me to believe the programs would be included in the system image.
I am trying to set up a MDT Deployment that will install Win 7 and MS Office 2010. With the Win 7 install I am able to have the system ask for the Windows Key after the install has completed. I would like to do the same for MS Office. I am going to be using this deployment tool for every new computer we get going forward and don't want to have to update my deployment every time I run one. I simply would like to deploy the image and then enter the Product key and activate it.
Yesterday I installed Microsoft Digital Image Suite 2006 for a graphic editor friend of mine to do some work. Everything installed with out an issue then Started getting BSODs one after the other after the other. This machine was troubleshooted before but Im back again. Im attaching the *.DMPs for analysis. I removed the program and Still had about 6 additional BSODS.
OS Win 7 Ultimate x64 CPU AMD Athlon II X3 Processor Motherboard Gigabyte MA770T-UD3 Memory ADATA XPG Gaming Series 4GB (2 x 2GB) Graphics Card(s) EVGA Geforce 8400GS Sound Card TC Electronic Konnekt 8 Monitor(s) Displays Dell 15in PSU RAIDMAX RX-500AF Case COOLER MASTER Elite RC-330-KKR1 Cooling COOLER MASTER Hyper TX3 RR-910-HTX3-G1
I just discovered my DVD/CD drive is not working when I attempted to launch the windows 7 iso file 64bit.
So I used isobuster to extract the files to an external harddrive ( over 300 gig). However when I try to run the setup.exe file, I get the message "setup.exe is not a valid win32 app" - not sure why? My pc has 4 gig RAM and has AMD Athlon 64 processor?
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
I am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
Not sure what happened, the netbook is supposed to come with a re-image recovery point, but maybe i accidentally deleted it. anyway, that's not going to happen and i can't reinstall cleanly with a format because it is win 7 starter so i do not have a cd. can i just delete my cookies, my files, and uninstall all of my programs and sell it? the thing i'm worried about is access to bank accounts or anything else similar i used the internet for.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 620 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 16126 Mb Graphics Card: ATI Radeon HD 4200, 368 Mb Hard Drives: C: Total - 953866 MB, Free - 854043 MB; D: Total - 953765 MB, Free - 953619 MB; Motherboard: ASUSTeK Computer INC., M4A785TD-M EVO Antivirus: Trend Micro Client/Server Security Agent Antivirus, Updated and Enabled
My machine is making a weird sound and I want to be prepared for the worst before I let a technician touch it.I'm running Windows 7 on my PC and am backing up files to a Microsoft Home Server but want a complete "copy" of my PC system (programs, files, settings, etc.).My head is starting to spin with everthing I've read and heard about cloning and imaging not to mention all the software choices (cloud or external hard drive) and if external hard drive is the way to go, which one.
I tried to create a disk image using the Windows 7 feature. The creation failed with a message that chkdsk /r should be run on the source and destination HDs. Destination HD was error free. Source HD had bad clusters replaced in five files.Second attempt to create a disk image failed with the same message.There are no system symptoms, everything seems to be working as usual.