Restoring Windows 7 Image To New SSD / HDD Setup
Jan 18, 2013
My main desktop PC having HDD only setup, then I bought a Intel 320 Series 80GB SSD and migrated my system over to it using Intel's software, then made the HDD a storage drive due to limited space on my SSD. Fast forward to now. My SSD is basically dead from a firmware bug that makes data irrecoverable without some special algorithm that professional data recovery centers have. Oddly enough, it came back to life, I rebooted, imaged whole system including both drives. I had been doing this, but most recent backup was a month prior, so I stood to lose quite a bit that I had done over that month stretch. The new image went great. I was saved and so excited. Apparently that was a one and done deal, as it never has worked since then.
I intend on ordering new (bigger) SSD to replace it, keeping setup the same, as new SSD will still be too small. Now from my understanding, I can restore my image to both drives and everything will be as it it never left? Is this correct? How about things like partition alignment or special SSD configuration that I had to do some of when I first configured it as so? Is that carried over since it would be in the image or am I good to go once restore is complete? Also, in meantime, I have another SSD in box, but it is smaller. Is it worthwhile to use that temporarily, then migrate system over to new SSD when I get it? Or should I just wait until I get new SSD and restore current image to that?
View 4 Replies
ADVERTISEMENT
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Jan 18, 2012
we have two different PC's[PC1 and PC2](hardware totally different) PC1 After preparing all my windows 7 (installing programs, configuring them, installing updates, activating programs and so on) I make my drive C: total image back up to external hard drive. PC2 I Boot up windows 7 recovery startup and choose restore from image and then I put in external hard drive with usb and make it restored on my other computer. Everything looks fine, it finishes with no errors and then system restarts. When windows are finishing to show "Windows starting" screen, computer restarts instantly.Then system autimatically suggests me to repair it, so ok then auto repairs are scaning and guess what it can't repair, because it finds some kind of problem with drivers, could be that they are incompatible with my new PC.how to make this work, how to fix issue that old PC's drivers are being loaded, maybe I am able to turn it off so default drivers are being loaded?The reason why I want to make this work cause I want to use it for multiple computers.
Simple summary:
PC1 Windows Image backed up to external HDD
PC2 Windows Image restored from external HDD
PC2 Windows can't start because of driver error
View 9 Replies
View Related
Oct 1, 2012
I've been placed in charge of setting up new PCs at work.These are tablet PCs and the hardware in each is identical...I've now setup one PC to function EXACTLY how I want it.My question is, what's the best way to image the entire drive and then load it onto subsequent PCs (please nothing like PXE) the restore will be done from a USB thumb drive.
View 9 Replies
View Related
Jun 9, 2011
I am trying to do something very similar, but not quite exactly the same as here. I hope that there might be someone here that has some tips that would be useful to what I am trying to acheive.
I just got a new system running Windows 7. I bought the "professional" version of Windows 7, so that I would be able to run "XP only" programs. I have some old software from companies that went belly up and no longer provide support. I was told that the professional version would run these programs, but I guess I didn't do my research well enough. They are not compatible.
What I would like to do now is run a dual boot between Windows 7 and XP. The difference in my case is that rather than doing a clean install of windows XP on the new partition, I would like to restore an image that I have of my old computer's drive (running XP) to the new partition on the new system (running Windows 7). Restoring to a new hardware environment shouldn't be a problem in theory, since I am using Acronis True Image Home 2011 with the add on that facilitates this.
I am assuming that the process would be the same, up until the point that the directions here say to insert the CD to install windows XP.
View 9 Replies
View Related
Jan 5, 2012
I recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies
View Related
Jun 27, 2011
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
View 9 Replies
View Related
Dec 3, 2011
1) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
View 3 Replies
View Related
Dec 3, 2011
I have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
View 9 Replies
View Related
Jan 16, 2012
I had an HP 6310y Desktop (1 TB hdd) that died as well as the mobo. Luckily, I created a system image onlu 3 days prior to the crash. I have very important data on the hdd (business, wedding photos,etc). Im about to order a new PC but in the meantime, Im trying to restore the image in order to extrapolate that important data so I can burn to CD
1) I have a Samsung RV520 (640gb). I tried to restore my image over the samsung in order to do this. However, it prompted me "The system image restore failed. Windows cannot restore a system a system image to a computer that has different firmware.*The system image was created on a computer using BIOS and the computer is using EFI."
View 3 Replies
View Related
Mar 2, 2012
After successfully restoring the Windows7 image from partition 2 (/dev/sda2) to partition 1 (/dev/sda1) using Clonezilla, Windows7 is no longer able to boot and displays the following error messages:
Quote: Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
[...] Info: The boot selection failed because a required device is inaccessible To solve this particular issue, I rebooted with the Windows7 DVD and hit Repair... which didn't work. But even if it did, I can't do this every time I restore an image to test. Note that I used the same laptop to save and restore the partition, so it's not HAL-related.
Here's what the Repair screen says (poor man's screenshots): Attachment 201071 Does someone know what can be the cause for this error, and what can be done before saving and/or restoring an image with Clonezilla?
View 1 Replies
View Related
Oct 22, 2012
I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
View 3 Replies
View Related
Jan 14, 2011
I have got Dell Studio 1558 Laptop. When I received my laptop, the full 480 GB was in a single drive and using device manager i splitted into 3 drives. Now, if I use Dell Restore to factory image option should it have some effect as the original c drive when shipped is currently less. Just want to know this as I will be using this feature.
View 4 Replies
View Related
Oct 22, 2012
i have my restore data on my laptop but i dont have data restore software so
View 2 Replies
View Related
Jun 20, 2012
Ive owned a dell studio 1558 laptop for almost 2 years now and have recently been experiencing some overheating issues, among my many solutions "new thermal paste, cleaning the inside" and a virus scan using Avast, which discovered a four digit number of corrupted files followed by their deletion and subsequent problems due to now missing some .dll files making me unable to run anything or access the internet. Ive decided I should restore the laptop to its factory settings which I believe I have done before. The problem now is that once I reach the Advance boot menu using F8, I press enter on the "repair your computer" option which is followed by a bar saying windows is loading files, lasting one second, and then windows loads up and nothing changed.
View 3 Replies
View Related
Aug 3, 2011
While I was installing an OEM 64-bit version of Windows 7 I got the following pop-up message during the "completing installation" step:
setup.exe - Bad image C:Windowssystem32sppc.dll is either not designed to run on windows or it contains a error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I hit ok, and it popped up again... and again... etc. So finally I tried to cancel the Install via the standard red x routine. Upon which i received a message saying that installation cannot be cancelled at this point... blah blah"
So being stuck and unable to finish or cancel the installation, I went for the good old turn off the computer method. Then I started fresh reformatting the drive and all. I had to leave the location I was at unfortunately while it was at "extracting files 52%" We'll see what's showing when I arrive in the morning.
Now, the question(s):
What causes this message to appear? And obviously, how do I fix/prevent it?
If it's due to bad media, how do I get a replacement copy? (seeing as it's OEM and thus I am technically responsible for support as I am the system builder)
Finally, the disclaimer:
Yes, I do know the difference between OEM and Retail. Yes, I did legitimately purchase the installation media & key. Yes, I am reselling this system to an end user; it is NOT for personal use. No, I did not run the OPK prior to using this software; I did not see the point as in this particular case I am personally setting up the machine for the client (plugging it in, installing software, registering & activating that software as well as the OS, etc.) Yes, I did look on this forum, as well as others, including window's own, and all over "the Google" to no avail
View 9 Replies
View Related
Mar 22, 2012
One of my drives in raid0 crashed and fortunately I had windows 7 x64 backup activated and running daily. After recreating the array with the remaining drives, I tried to restore from the external usb drive but it didn't work. Apparently the problem is that I had been running "file backup" and not "image backup". Probably because when I configured backup for the first time, it asked to back up all my drives which was not possible and not needed so didn't check the image backup button.
Now the backup set is visible only from within windows (I set Windows 7 again up) but NOT from the restore part of Windows 7 setup / recovery disk. Files inside the backup set are not .vhd but zipfiles. All my c: drive files actually ARE inside the backup set, but running restore will restore all the crap folders (like c: vidia) except from the system folders like c:windows, c:program files (and x86), c:programdata etc.
Any way to restore these? I am thinking of the possibility of somehow restoring all the files and running windows repair on top of this to actually make c:drive bootable again. My users folder is not affected as I had moved it to d: but this presents the additional challenge of being able to actually make the system see the users folder....
View 7 Replies
View Related
Mar 27, 2012
I was wondering if it was possible to image one device after it's been setup and re-image the other 24 tablets with the created image. I know its *possible* but will there be issues with the Windows 7 key/activation process? Each device has an OEM key/product ID in place and I don't want to wipe it if at all possible. I intend to use Macrium Reflect Free Edition, are there better options for what I'm trying to do? We'd also be using the original image as an emergency restore just in-case a tech in the field decides to get into some system aspects that they ought not have access to (taken care of but some of our guys are fairly crafty).
View 1 Replies
View Related
Aug 26, 2011
Is there any way to setup a computer on vmware and then make an image of the vm and put it on a physical computer (multiple computers if possible)?
View 5 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
Dec 14, 2012
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies
View Related
Aug 24, 2009
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies
View Related
Nov 22, 2009
if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
View 3 Replies
View Related
Sep 23, 2011
I own an HP G70 laptop which came preinstalled with vista. I received a free copy of Windows 7 (as an .iso image) with a legitimate activation code through MSDNAA. I burned the image to a DVD and install Windows 7 from the burned disk doing the necessary task of formatting the hard drive, etc. etc. Now, before I started installing programs and putting my files back from back up disks, the idea of making a system image right when I first started up Windows went over my head (fail on my part), so if I were to make one now, it would be over a 30GB. Now, if my hard drive were to go bad, can I just restore Windows 7 with the installation disc I made instead of making a system image or recovery partition?
View 2 Replies
View Related
Oct 27, 2012
I am not new to Windows 7 at all, and I know quite a bit but I have never came across the problem that I am faced with.My old computers motherboard failed and quit on me, causing the computer not to boot or even turn on. So I got a new one. My question: What and how is the easiest way for me to restore my Windows 7 onto my new computer (all new hardware), without loosing any system settings, programs, files ect. I dont have a backup point of the old Windows 7. All I have is the HD with Windows 7 on it. (However I have a backup of all of the important files.) Searching around a little on my own I could not find anything on how to restore Windows 7 without making a restore point in the past.
View 3 Replies
View Related
Jun 20, 2012
A few months ago I upgraded my Sony Vaio E-series Laptop memory from 4gb to 8gb of RAM. Within the hour of the upgrade I received a few blue screens closing windows in order to protect it (best I can recall of the message) from a certain threat. (I believe it is good to note that I play Global Agenda, which I probably shouldn't since its an i3 2.4 Ghz without a video card) I let the computer rest that day and afterwards it has been working fine (with the occasional blue screen crash whenever the computer's fan runs high) Recently the number of blue screen crashes has increased when ever I would run processor heavy programs such as Vegas Pro 11 (video editing) or even Global Agenda when the computer is cool. It eventually got to the point where windows explorer would freeze sometimes (and it would take a while to unfreeze) I eventually couldn't take it so I concluded that something was either wrong with the hard drive or a virus which AVG or Kaspersky couldn't detect.
First before booting up to windows I pressed F10 to bring up Vaio Care Recovery (or something along those lines.) I believe I skipped the restore point restore and went strait to erase or format the hard drive. The process started after a ten second countdown and stopped at 43% giving me this error message:"An Error occurred while executing an application. The operation was not completed. Shut down your computer then try the operation again after Reboot.Error:320"
I tried formatting the hard drive about 4-6 times each with the same message. I quit. Then I found two recovery discs that I had created earlier. One I wrote "Vaio Backup Disk" which was on a Duel Layer DVD and the other "Repair Disc Windows 7 Boot Disk" on a CD-R. I inserted the Repair Disc and windows loaded files containing system recovery options. A window opened up containing the following message about either Restoring your computer using a system image or use the recovery tools that can help fix problems starting windows. == One thing to note is that in the middle was a graph showing operating systems - partition size - and location. There were none of those shown; no operating system or what so ever == So apparently I couldn't choose system restore point since there was no system to restore. I eventually got to the command prompt and choose to finish the job that Vaio Care Restore couldn't which was to format the hard drive. I looked through the internet, found out how to do it and formatted everything that had to do with the storage (didn't touch the recovery partition). == I had about 4 volumes. C: D: E: F:. I believe I combined C: and D: since there was no need to have them partitioned. And finally formatted them. I tried formatting the Recovery partition, but it wouldn't let me. == After all of this I inserted a Windows 7 Home Edition installation disc but one of three things would pop up after the Vaio logo. One would say that bootmgr is missing. (this is the most recent message and the rest have popped up in the past, but do not continue to do so.) Other messages would say that there is no operating system found, or if it reads the disc at all that a certain file in the boot folder is not valid or found. I am pretty sure that the installation disc works because it launches right away on my other computers.
View 2 Replies
View Related
Jan 3, 2013
Okay, I'm sure this is really quite easy, but for whatever the reason I'm finding it really confusing...
How do you restore your computer to factory settings with a windows 7 disc?
View 1 Replies
View Related
Jan 16, 2009
When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies
View Related
Sep 28, 2011
i have downloaded a windows 9 version for my laptop. and i dont like it, i prefer windows 7. how do i remove it and get it back to ho
View 8 Replies
View Related
Sep 19, 2011
So, I recently bought a used computer from CL. The machine is a Dell Laptop that originally had Windows Vista installed on it. The original owner upgraded to Windows 7 Enterprise and had a bunch of new software installed on the machine. (FL Studio, Photoshop, etc.)I was able to use the computer successfully for the first day until I installed iTunes. Something went wrong, and now when I boot up in normal mode Windows will freeze as soon as i try to open anything. I can open the Start menu, but anything past that will cause a freeze. The computer works fine in all Safe ModesSo, what I would like to do is restore Windows 7 to it's original configurations and still be able to keep all those great programs already installed. However, I do not any of the Windows 7 media that was used for the upgrade. What can I do? Will creating a system image work, or will I end up just copying the freeze problem if I do that?
View 3 Replies
View Related
Jan 14, 2013
The hard drive failed on my friend's Win 7 laptop. I replaced the hard drive, now I am in the process of recovering documents that he had backed up on an external hard drive. He was using Windows Backup.When I start the application in restore mode and direct it to the external hard drive, it shows a backup done on Jan 2. But when I browse through the backup folders using Windows Backup, it does not show any of his recent files. I went ahead and restored the folders, but the most recent files in the restored user folders are only from mid November
View 9 Replies
View Related
