I've been placed in charge of setting up new PCs at work.These are tablet PCs and the hardware in each is identical...I've now setup one PC to function EXACTLY how I want it.My question is, what's the best way to image the entire drive and then load it onto subsequent PCs (please nothing like PXE) the restore will be done from a USB thumb drive.
View 9 RepliesOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
we have two different PC's[PC1 and PC2](hardware totally different) PC1 After preparing all my windows 7 (installing programs, configuring them, installing updates, activating programs and so on) I make my drive C: total image back up to external hard drive. PC2 I Boot up windows 7 recovery startup and choose restore from image and then I put in external hard drive with usb and make it restored on my other computer. Everything looks fine, it finishes with no errors and then system restarts. When windows are finishing to show "Windows starting" screen, computer restarts instantly.Then system autimatically suggests me to repair it, so ok then auto repairs are scaning and guess what it can't repair, because it finds some kind of problem with drivers, could be that they are incompatible with my new PC.how to make this work, how to fix issue that old PC's drivers are being loaded, maybe I am able to turn it off so default drivers are being loaded?The reason why I want to make this work cause I want to use it for multiple computers.
Simple summary:
PC1 Windows Image backed up to external HDD
PC2 Windows Image restored from external HDD
PC2 Windows can't start because of driver error
My main desktop PC having HDD only setup, then I bought a Intel 320 Series 80GB SSD and migrated my system over to it using Intel's software, then made the HDD a storage drive due to limited space on my SSD. Fast forward to now. My SSD is basically dead from a firmware bug that makes data irrecoverable without some special algorithm that professional data recovery centers have. Oddly enough, it came back to life, I rebooted, imaged whole system including both drives. I had been doing this, but most recent backup was a month prior, so I stood to lose quite a bit that I had done over that month stretch. The new image went great. I was saved and so excited. Apparently that was a one and done deal, as it never has worked since then.
I intend on ordering new (bigger) SSD to replace it, keeping setup the same, as new SSD will still be too small. Now from my understanding, I can restore my image to both drives and everything will be as it it never left? Is this correct? How about things like partition alignment or special SSD configuration that I had to do some of when I first configured it as so? Is that carried over since it would be in the image or am I good to go once restore is complete? Also, in meantime, I have another SSD in box, but it is smaller. Is it worthwhile to use that temporarily, then migrate system over to new SSD when I get it? Or should I just wait until I get new SSD and restore current image to that?
I am trying to do something very similar, but not quite exactly the same as here. I hope that there might be someone here that has some tips that would be useful to what I am trying to acheive.
I just got a new system running Windows 7. I bought the "professional" version of Windows 7, so that I would be able to run "XP only" programs. I have some old software from companies that went belly up and no longer provide support. I was told that the professional version would run these programs, but I guess I didn't do my research well enough. They are not compatible.
What I would like to do now is run a dual boot between Windows 7 and XP. The difference in my case is that rather than doing a clean install of windows XP on the new partition, I would like to restore an image that I have of my old computer's drive (running XP) to the new partition on the new system (running Windows 7). Restoring to a new hardware environment shouldn't be a problem in theory, since I am using Acronis True Image Home 2011 with the add on that facilitates this.
I am assuming that the process would be the same, up until the point that the directions here say to insert the CD to install windows XP.
I work for a company which needs to make small specialized PCs running Windows so they can run a specific program, hopefully on an 8gb CF card. I'm in the process of stripping down a copy of Windows 7 to be small enough for that, but that's something else. I need to be able to install the reduced copy of Windows 7 and our own software and then probably use Norton Ghost to create an image that I can just apply to every one of these computers we make in the future. Is there a way of creating this image from within my main OS instead of just creating and booting to a separate partition?
View 5 Replies View RelatedI recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies View RelatedI recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.
I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.
When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.
What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.
Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?
I am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?
View 2 Replies View RelatedI have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.
View 9 Replies View RelatedMy laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 52
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
1) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
I have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
View 9 Replies View RelatedI had an HP 6310y Desktop (1 TB hdd) that died as well as the mobo. Luckily, I created a system image onlu 3 days prior to the crash. I have very important data on the hdd (business, wedding photos,etc). Im about to order a new PC but in the meantime, Im trying to restore the image in order to extrapolate that important data so I can burn to CD
1) I have a Samsung RV520 (640gb). I tried to restore my image over the samsung in order to do this. However, it prompted me "The system image restore failed. Windows cannot restore a system a system image to a computer that has different firmware.*The system image was created on a computer using BIOS and the computer is using EFI."
After successfully restoring the Windows7 image from partition 2 (/dev/sda2) to partition 1 (/dev/sda1) using Clonezilla, Windows7 is no longer able to boot and displays the following error messages:
Quote: Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
[...] Info: The boot selection failed because a required device is inaccessible To solve this particular issue, I rebooted with the Windows7 DVD and hit Repair... which didn't work. But even if it did, I can't do this every time I restore an image to test. Note that I used the same laptop to save and restore the partition, so it's not HAL-related.
Here's what the Repair screen says (poor man's screenshots): Attachment 201071 Does someone know what can be the cause for this error, and what can be done before saving and/or restoring an image with Clonezilla?
I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
View 2 Replies View RelatedI was trying to make an system image of my Win 7 OS to my hard drive...all went well until it finally stopped with the following message: backup failed! System could not find file specified ( 0x80070002 ) close. Nothing else...how is one suppose to make sense of this? Does this mean i can never make an image file of my system? Prior to the backup, Win 7 said that it would check system to make sure its OK to make backup. After it did the checkup it gave me the go ahead to do it
View 3 Replies View RelatedAfter my problems reported elsewhere, I decided to make a system image after I got things working. This was recommended by inference by one of the gurus who responded to my questions.So I got the system up again and I needed to learn about system images. So I hit F1 and read about creating a system image. Clicked here, clicked there, specified by external hard drive and told it to only include my system drive C:. Whir, whir, whir . . .. system image created.Now, I've cleaned the system of any possible Malware, so I want to create a new image of my system drive. So, I click here, click there and specify my external hard drive but NOW it won't let me include only drive C:, it wants to include my data drive, E:. The check box for E: is greyed out so I can't uncheck it.
View 8 Replies View RelatedI just bought all the parts to build a new computer and I'm putting them together right now. Next step is gonna be installing Windows 7 Professional 64-bit and I'd like to make a backup copy of that fresh install, in case something goes wrong in the future or maybe if I just wanna go back to a clean Windows installation after a while.
Currently I'm thinking of using the "Create a system image" option in the Backup and Restore category from the Control Panel, right after I finish the installing Windows. I've read that this tool creates a .VHD backup of the disk where Windows is installed but I have a couple of questions about using this method:
How big is gonna be the resulting backup? If I installed Windows in a 120GB partition is the backup system image gonna be 120GB in size or is just gonna be ~30GB-ish i.e. the size of Windows system files and folders?
If I restore that system image after using the system for a while is it gonna wipe clean the whole partition and reset it to the state it was when I made the image or is it just gonna bring back the files and folders from the backup and leave alone any other files I had put in the partition?
I have got Dell Studio 1558 Laptop. When I received my laptop, the full 480 GB was in a single drive and using device manager i splitted into 3 drives. Now, if I use Dell Restore to factory image option should it have some effect as the original c drive when shipped is currently less. Just want to know this as I will be using this feature.
View 4 Replies View Relatedi have my restore data on my laptop but i dont have data restore software so
View 2 Replies View RelatedI have a few quick questions regarding System Images...but first, let me give you a little background.
My HP Pavilion dm-4 has a bum hinge, so I'm sending it to HP for them to fix it. They told me that they typically test the computer before sending it back, and thus also perform a complete system recovery (to go back to factory settings). Obviously, they want me to backup my data.
So. It's question time:
1) Can I restore a "System Image" to get my computer back to its current state upon receiving my laptop back from HP? (is a system image just a duplicate of the hard drive?)
2) Are all hard drives capable of creating a System Image, or just some?
3a) Are there any Hard drives you guys recommend?
3b) My C: (local disk) capacity is 441GB (303GB Free) and my D: (RECOVERY) is 23.5GB (3.43GB Free). Does that mean I have to buy a Hard drive that is at least 465GB...or could I get one that's just 160-ish GB
I was creating a system image with Windows built-in utility. It had been running for at least six hours and I think it may have been either finished or very close when my computer shut down due to a BSOD.
Is there any way to find out whether or not the image was finished and created successfully, or if not, is there a way to continue and finish writing the last little bit to salvage the image and have one that would work if I needed it to restore my computer?
The image was writing to an external HDD, and I think it had to erase/write over the previous image due to space considerations.
I'm creating a system image on my laptop. Is it safe to use my computer while creating a system image?
View 5 Replies View RelatedOur small office has several laptops, some with Intel chips, some with AMD. I'm trying to find a way to create an image for each laptop type that would include Windows 7 and MS Office.
I've looked around a bit, and I'm finding plenty of info on creating the Windows 7 image, but can't really find anything in layman terms for also including MS Office and any other necessary programs (snagit, Adobe Reader, etc.) to include or how to include, in the image.
Obviously, free (shareware) software is good to do the job in order to keep the cost down. I think I might even have a copy of WinPE I inherited from the person that was there before me, unfortunately, no documentation....Like I said, I've never done this before and I could use a step-by-moron-proof-step process if one actually exists...
Ive owned a dell studio 1558 laptop for almost 2 years now and have recently been experiencing some overheating issues, among my many solutions "new thermal paste, cleaning the inside" and a virus scan using Avast, which discovered a four digit number of corrupted files followed by their deletion and subsequent problems due to now missing some .dll files making me unable to run anything or access the internet. Ive decided I should restore the laptop to its factory settings which I believe I have done before. The problem now is that once I reach the Advance boot menu using F8, I press enter on the "repair your computer" option which is followed by a bar saying windows is loading files, lasting one second, and then windows loads up and nothing changed.
View 3 Replies View RelatedI am trying to create a system image ready for installing a larger HDD (WD20EARX), but when using the Windows 7 wizard, the drive, Buffalo 500 USB External HDD, is not in the drop down selection box. The drive is there OK and can use it OK for normal work and there is over 450GB available. My original HDD is 160GB.
View 3 Replies View RelatedI want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
View 4 Replies View RelatedI am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View Related