Creating An Image File With MS Office?

May 16, 2011

Our small office has several laptops, some with Intel chips, some with AMD. I'm trying to find a way to create an image for each laptop type that would include Windows 7 and MS Office.

I've looked around a bit, and I'm finding plenty of info on creating the Windows 7 image, but can't really find anything in layman terms for also including MS Office and any other necessary programs (snagit, Adobe Reader, etc.) to include or how to include, in the image.

Obviously, free (shareware) software is good to do the job in order to keep the cost down. I think I might even have a copy of WinPE I inherited from the person that was there before me, unfortunately, no documentation....Like I said, I've never done this before and I could use a step-by-moron-proof-step process if one actually exists...

View 9 Replies


ADVERTISEMENT

Creating A System Image

May 8, 2011

When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?

View 2 Replies View Related

Creating Image Stopped?

Dec 29, 2011

I was trying to make an system image of my Win 7 OS to my hard drive...all went well until it finally stopped with the following message: backup failed! System could not find file specified ( 0x80070002 ) close. Nothing else...how is one suppose to make sense of this? Does this mean i can never make an image file of my system? Prior to the backup, Win 7 said that it would check system to make sure its OK to make backup. After it did the checkup it gave me the go ahead to do it

View 3 Replies View Related

Creating System Image?

Oct 16, 2012

After my problems reported elsewhere, I decided to make a system image after I got things working. This was recommended by inference by one of the gurus who responded to my questions.So I got the system up again and I needed to learn about system images. So I hit F1 and read about creating a system image. Clicked here, clicked there, specified by external hard drive and told it to only include my system drive C:. Whir, whir, whir . . .. system image created.Now, I've cleaned the system of any possible Malware, so I want to create a new image of my system drive. So, I click here, click there and specify my external hard drive but NOW it won't let me include only drive C:, it wants to include my data drive, E:. The check box for E: is greyed out so I can't uncheck it.

View 8 Replies View Related

Creating Image For Other OS From Within Windows 7

Sep 7, 2011

I work for a company which needs to make small specialized PCs running Windows so they can run a specific program, hopefully on an 8gb CF card. I'm in the process of stripping down a copy of Windows 7 to be small enough for that, but that's something else. I need to be able to install the reduced copy of Windows 7 and our own software and then probably use Norton Ghost to create an image that I can just apply to every one of these computers we make in the future. Is there a way of creating this image from within my main OS instead of just creating and booting to a separate partition?

View 5 Replies View Related

Creating A System Image?

Nov 19, 2011

I just bought all the parts to build a new computer and I'm putting them together right now. Next step is gonna be installing Windows 7 Professional 64-bit and I'd like to make a backup copy of that fresh install, in case something goes wrong in the future or maybe if I just wanna go back to a clean Windows installation after a while.

Currently I'm thinking of using the "Create a system image" option in the Backup and Restore category from the Control Panel, right after I finish the installing Windows. I've read that this tool creates a .VHD backup of the disk where Windows is installed but I have a couple of questions about using this method:

How big is gonna be the resulting backup? If I installed Windows in a 120GB partition is the backup system image gonna be 120GB in size or is just gonna be ~30GB-ish i.e. the size of Windows system files and folders?

If I restore that system image after using the system for a while is it gonna wipe clean the whole partition and reset it to the state it was when I made the image or is it just gonna bring back the files and folders from the backup and leave alone any other files I had put in the partition?

View 5 Replies View Related

Creating A Windows 7 Image Of The C: Drive Only

Jun 18, 2011

I recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.

I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.

When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.

What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.

Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?

View 4 Replies View Related

Creating And Using System Image Backups

Aug 31, 2012

I have a few quick questions regarding System Images...but first, let me give you a little background.

My HP Pavilion dm-4 has a bum hinge, so I'm sending it to HP for them to fix it. They told me that they typically test the computer before sending it back, and thus also perform a complete system recovery (to go back to factory settings). Obviously, they want me to backup my data.

So. It's question time:

1) Can I restore a "System Image" to get my computer back to its current state upon receiving my laptop back from HP? (is a system image just a duplicate of the hard drive?)

2) Are all hard drives capable of creating a System Image, or just some?

3a) Are there any Hard drives you guys recommend?

3b) My C: (local disk) capacity is 441GB (303GB Free) and my D: (RECOVERY) is 23.5GB (3.43GB Free). Does that mean I have to buy a Hard drive that is at least 465GB...or could I get one that's just 160-ish GB

View 7 Replies View Related

BSOD At The End Of Creating System Image?

Sep 13, 2011

I was creating a system image with Windows built-in utility. It had been running for at least six hours and I think it may have been either finished or very close when my computer shut down due to a BSOD.

Is there any way to find out whether or not the image was finished and created successfully, or if not, is there a way to continue and finish writing the last little bit to salvage the image and have one that would work if I needed it to restore my computer?

The image was writing to an external HDD, and I think it had to erase/write over the previous image due to space considerations.

View 8 Replies View Related

Windows 7 Creating Image And Restoring To Different PCs?

Oct 1, 2012

I've been placed in charge of setting up new PCs at work.These are tablet PCs and the hardware in each is identical...I've now setup one PC to function EXACTLY how I want it.My question is, what's the best way to image the entire drive and then load it onto subsequent PCs (please nothing like PXE) the restore will be done from a USB thumb drive.

View 9 Replies View Related

Creating System Image For Laptop

Apr 12, 2011

I'm creating a system image on my laptop. Is it safe to use my computer while creating a system image?

View 5 Replies View Related

External HDD Not Recognized When Creating A System Image

Sep 30, 2011

I am trying to create a system image ready for installing a larger HDD (WD20EARX), but when using the Windows 7 wizard, the drive, Buffalo 500 USB External HDD, is not in the drop down selection box. The drive is there OK and can use it OK for normal work and there is over 450GB available. My original HDD is 160GB.

View 3 Replies View Related

Creating A System Image In Safe Mode With Windows 7?

Oct 15, 2012

I am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?

View 2 Replies View Related

Creating System Image Fails Every Time - Run CHKDSK /R?

May 1, 2012

I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?

View 4 Replies View Related

Windows 7 / Creating A System Image: Formatting All Partitions?

Jun 30, 2012

I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.

View 9 Replies View Related

Windows Backup Stalls When Creating A System Image?

Sep 21, 2012

My laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.

Lenovo SL510
Windows 7 Professional

View 1 Replies View Related

Creating Mirror Image On Backup External Drive?

Jan 4, 2013

I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.

View 6 Replies View Related

Creating A Separate Disk Image Partition For Running Unwanted Programs?

Sep 5, 2012

I have a workstation on a gaming rig. I work and play games on it. I wanted to ask if I could separate my work files and GAMES setups (installed files) so they don't harm my work data.I do play games with cheats/hacks and they mostly contain malicious files which can damage my operating system. I want to create a seperate DISK image like Vmware in which I can run games without being worried about any harmful files accessing my work partition.

View 5 Replies View Related

Open An Office 2007 PST File In Office 2010?

Mar 3, 2011

I've recently got a new machine and had copied my old PST file over. Whenever I go to open it I get "File access is denied. You do not have the permission required to access the file C:Users*username*DocumentsOutlook Files*pst file name*"I created a test archive and was able to open that one (same location ) just fine.

View 1 Replies View Related

Libre Office & Open Office File Associations

Jan 7, 2012

I realize that this is not primarily a Windows7 problem, but it just bothered me to see one program stopping me from setting the file associations for another program. And I need to vent.I have been running both Libre Office (LO) and Open Office (OO) for months now, not a heavy user, just trying to keep both going while I figure which one I liked best. These apps share file extensions, and are very file compatible, and I had always been able to open the same document in either.Both families of programs pinned to the Start Menu had, for months, contained file history of many documents, some documents showing as history in both app-families, and able to be opened in either LO or OO. Yesterday, I upgraded Open Office. First thing I noticed, the LO apps pinned to the start menu had their document history icons changed to OO icons. Sure enough, these documents, in the history list of a pinned LO app, open in OO. Rats, I think--I guess I will have to re-assign the extensions to LO. No can do! I have never had this happen before, but I now when I use "Open With" on a file with the shared extensions, (.ods, .odt,...) then "Choose Default Programs...", then "browse" to set a new default, the LO app does not stick. So far, I am unable to set the file association to any of the LO apps.

I have occasionally seen software, usually pretty sleazy and undesirable software, that would hijack file associations, would take-over as much of the computer as possible. But at worst, they just made it inconvenient so that the user would have to go back and re-assign the desired apps. But I did not expect to see a professionally done app like Open Office to do this sort of thing without asking. And for sure, I did not expect to have an application block my ability to re-assign file extensions to to another app.

View 3 Replies View Related

Creating Batch File?

Nov 23, 2011

I have 2 files that are in the same directory which I want to start one after the other.I have created a simple batch file like this which opens 2 files at the same time. ExampleStart Server.exeStart Game.exeIs it possible to leave say a 10 second gap between opening the Server.exe and Game.exe? Also is it possible to quit Server.exe when I exit Game.exe?

View 2 Replies View Related

Creating A Dvd With A Avi File In Nero 9

Oct 26, 2009

For some reason when i add my movie which is .avi format into nero 9 dvd-video burn it says please add rather .avi or.mpg but the movie im adding is .avi

Any suggestions on how to resolve this issue?

View 9 Replies View Related

Creating A WinPE Script File?

Feb 20, 2011

I'm using the WIAK CD to create a winpe boot media and it works fine, there are a few commands that you have to remember so I created a winpe.cmd file to make life easier. Here is the content of my winpe.cmd file:

copype x86 c:winpe
copy c:winpewinpe.wim c:winpeisosourcesoot.wim
copy "c:program fileswindows aik oolsx86imagex.exe" c:winpeiso
oscdimg -n -bc:winpeetfsboot.com c:winpeiso c:winpewinpe.iso

when I run (from the WAIK command line in admin mode) the first line copype x86 c:winpe is the only line that executes,why the rest of the commands don't run?

View 3 Replies View Related

Installing MS Office 2010 Via MDT Image Deployment Without Prod Key

Aug 20, 2012

I am trying to set up a MDT Deployment that will install Win 7 and MS Office 2010. With the Win 7 install I am able to have the system ask for the Windows Key after the install has completed. I would like to do the same for MS Office. I am going to be using this deployment tool for every new computer we get going forward and don't want to have to update my deployment every time I run one. I simply would like to deploy the image and then enter the Product key and activate it.

View 2 Replies View Related

Creating A Copy Of A File And Modifying The Name Of It Automatically?

Jan 27, 2012

In Windows Explorer, while viewing files and folders;

I want to be able to create a copy of the file, with an option when I right click. Instead of choosing Copy at right click, and then again right clicking in Windows Explorer and choosing Paste).

And also my main problem is Windows 7 is creating the pasted file name as "Filename - Copy" in the same folder with the original in it, but I do not want any spaces or even the dash. Can I modify it somehow to create the pasted filenames as 'FilenameCopy' instead of 'Filename - Copy'?

View 3 Replies View Related

Desktop Bug - Creating Duplicate Instances Of Same File

Sep 25, 2012

Basically, I've recently made the long-overdue transition from a 5-years old Windows XP machine to a brand-new Windows 7 one, which I've now had for a few days. Only yesterday, what appears to be a small bug reared it's ugly head.

Any file or folder created or moved onto my Desktop is automatically duplicated with another instance of that item. I say an instance because it's not simply a copy of that file, strictly-speaking, because when the duplicate is clicked, it opens the original file. So, I'm left with two instances of the same file on my Desktop. Just to make this clearer, suppose that, as an example, I created/moved a Plain Text file onto my Desktop. A duplicate of that item would then appear. When clicked, this duplicate opens the very same file, meaning therefore, that I have two instances of the same file. In case you were wondering, the duplicate is also not a shortcut to the original file: bringing up its properties, it has the exact same properties as the originally-created one does. I hope everyone's following me so far.

As well as the strange behaviour mentioned above, the bug also affects deleting files or folders in the Desktop. As I've already said, two instances of the file are created when a file is created on the Desktop. In the same way, deleting one instance of the file also deletes the other - but not straight away. It registers as deleted, but the Desktop has to be refreshed for the other instance to disappear.

View 9 Replies View Related

Stop Creating File.db And Recent.db On USB Drive?

Jan 12, 2013

When I plug in a USB flash drive, it's creating 2 files: file.db and recent.db These database files will open in notepad. File.db seems to be a list of all files on the flash drive and recent.db is a list of recently accessed files on the drive. If I delete them, it just recreates them. I don't see similar files on my C drive.Also, my work computer running Windows 7 Enterprise does not create them when I insert a USB drive.As a matter of privacy, I'd rather not have lists of my files on the drives.

View 1 Replies View Related

Creating Bat File For Restart Display Adapter?

Apr 12, 2011

I have to boot twice for my display adapter to start. Im making a bat file in startup folder who does this operation for me, but i cant get further than starting device manager.

Here is my .bat file so far: set DEVMGR_SHOW_DETAILS=1 start devmgmt.msc

View 3 Replies View Related

Error Creating A File Needed For Installation

Jan 1, 2013

Not sure if this is in the appropriate area, sorry about that but i am having said error when trying to install/repair/remove anything with windows installer ?

View 15 Replies View Related

Creating A Batch File To Auto-login To A Website

Nov 28, 2011

I have created the following batch file to automatically load and login to a site, I created it and tested it on a computer running xp, but I can't get it to work on a windows 7 machine "@ECHO OFF TITLE Water Monitor Auto Start Up mode con: cols=42 lines=1 REM Create a time delay Visual Basic file of 1 second cd c: IF NOT EXIST ECHO Wscript.Sleep 1000 >> 1second.vbs:timeloop REM Using a for loop to count for 20 seconds to allow startup script to finish for %%d in (20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0) do TITLE Water Monitor Auto Start Up in %%d Secs && ECHO. && 1second.vbs && cls.

View 3 Replies View Related

Creating Scheduled Task With .bat File Delayed Execution?

Sep 14, 2012

I know how to create scheduled task from .bat file. But if the PC is turned off, i want it to run first time someone logs on. Code: SchTasks /Create /SC MONTHLY /D 15 /TN My Task /TR C:RunMe.bat /ST 14:00 what should i add to this code to make it run if the user opens his pc at 16:00?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved