Creating Image Stopped?
Dec 29, 2011
I was trying to make an system image of my Win 7 OS to my hard drive...all went well until it finally stopped with the following message: backup failed! System could not find file specified ( 0x80070002 ) close. Nothing else...how is one suppose to make sense of this? Does this mean i can never make an image file of my system? Prior to the backup, Win 7 said that it would check system to make sure its OK to make backup. After it did the checkup it gave me the go ahead to do it
View 3 Replies
ADVERTISEMENT
May 8, 2011
When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
View 2 Replies
View Related
Oct 16, 2012
After my problems reported elsewhere, I decided to make a system image after I got things working. This was recommended by inference by one of the gurus who responded to my questions.So I got the system up again and I needed to learn about system images. So I hit F1 and read about creating a system image. Clicked here, clicked there, specified by external hard drive and told it to only include my system drive C:. Whir, whir, whir . . .. system image created.Now, I've cleaned the system of any possible Malware, so I want to create a new image of my system drive. So, I click here, click there and specify my external hard drive but NOW it won't let me include only drive C:, it wants to include my data drive, E:. The check box for E: is greyed out so I can't uncheck it.
View 8 Replies
View Related
Sep 7, 2011
I work for a company which needs to make small specialized PCs running Windows so they can run a specific program, hopefully on an 8gb CF card. I'm in the process of stripping down a copy of Windows 7 to be small enough for that, but that's something else. I need to be able to install the reduced copy of Windows 7 and our own software and then probably use Norton Ghost to create an image that I can just apply to every one of these computers we make in the future. Is there a way of creating this image from within my main OS instead of just creating and booting to a separate partition?
View 5 Replies
View Related
Nov 19, 2011
I just bought all the parts to build a new computer and I'm putting them together right now. Next step is gonna be installing Windows 7 Professional 64-bit and I'd like to make a backup copy of that fresh install, in case something goes wrong in the future or maybe if I just wanna go back to a clean Windows installation after a while.
Currently I'm thinking of using the "Create a system image" option in the Backup and Restore category from the Control Panel, right after I finish the installing Windows. I've read that this tool creates a .VHD backup of the disk where Windows is installed but I have a couple of questions about using this method:
How big is gonna be the resulting backup? If I installed Windows in a 120GB partition is the backup system image gonna be 120GB in size or is just gonna be ~30GB-ish i.e. the size of Windows system files and folders?
If I restore that system image after using the system for a while is it gonna wipe clean the whole partition and reset it to the state it was when I made the image or is it just gonna bring back the files and folders from the backup and leave alone any other files I had put in the partition?
View 5 Replies
View Related
Jun 18, 2011
I recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.
I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.
When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.
What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.
Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?
View 4 Replies
View Related
Aug 31, 2012
I have a few quick questions regarding System Images...but first, let me give you a little background.
My HP Pavilion dm-4 has a bum hinge, so I'm sending it to HP for them to fix it. They told me that they typically test the computer before sending it back, and thus also perform a complete system recovery (to go back to factory settings). Obviously, they want me to backup my data.
So. It's question time:
1) Can I restore a "System Image" to get my computer back to its current state upon receiving my laptop back from HP? (is a system image just a duplicate of the hard drive?)
2) Are all hard drives capable of creating a System Image, or just some?
3a) Are there any Hard drives you guys recommend?
3b) My C: (local disk) capacity is 441GB (303GB Free) and my D: (RECOVERY) is 23.5GB (3.43GB Free). Does that mean I have to buy a Hard drive that is at least 465GB...or could I get one that's just 160-ish GB
View 7 Replies
View Related
Sep 13, 2011
I was creating a system image with Windows built-in utility. It had been running for at least six hours and I think it may have been either finished or very close when my computer shut down due to a BSOD.
Is there any way to find out whether or not the image was finished and created successfully, or if not, is there a way to continue and finish writing the last little bit to salvage the image and have one that would work if I needed it to restore my computer?
The image was writing to an external HDD, and I think it had to erase/write over the previous image due to space considerations.
View 8 Replies
View Related
Oct 1, 2012
I've been placed in charge of setting up new PCs at work.These are tablet PCs and the hardware in each is identical...I've now setup one PC to function EXACTLY how I want it.My question is, what's the best way to image the entire drive and then load it onto subsequent PCs (please nothing like PXE) the restore will be done from a USB thumb drive.
View 9 Replies
View Related
Apr 12, 2011
I'm creating a system image on my laptop. Is it safe to use my computer while creating a system image?
View 5 Replies
View Related
May 16, 2011
Our small office has several laptops, some with Intel chips, some with AMD. I'm trying to find a way to create an image for each laptop type that would include Windows 7 and MS Office.
I've looked around a bit, and I'm finding plenty of info on creating the Windows 7 image, but can't really find anything in layman terms for also including MS Office and any other necessary programs (snagit, Adobe Reader, etc.) to include or how to include, in the image.
Obviously, free (shareware) software is good to do the job in order to keep the cost down. I think I might even have a copy of WinPE I inherited from the person that was there before me, unfortunately, no documentation....Like I said, I've never done this before and I could use a step-by-moron-proof-step process if one actually exists...
View 9 Replies
View Related
Sep 30, 2011
I am trying to create a system image ready for installing a larger HDD (WD20EARX), but when using the Windows 7 wizard, the drive, Buffalo 500 USB External HDD, is not in the drop down selection box. The drive is there OK and can use it OK for normal work and there is over 450GB available. My original HDD is 160GB.
View 3 Replies
View Related
Oct 15, 2012
I am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?
View 2 Replies
View Related
May 1, 2012
I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
View 4 Replies
View Related
Jun 30, 2012
I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.
View 9 Replies
View Related
Sep 21, 2012
My laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional
View 1 Replies
View Related
Jan 4, 2013
I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies
View Related
Sep 5, 2012
I have a workstation on a gaming rig. I work and play games on it. I wanted to ask if I could separate my work files and GAMES setups (installed files) so they don't harm my work data.I do play games with cheats/hacks and they mostly contain malicious files which can damage my operating system. I want to create a seperate DISK image like Vmware in which I can run games without being worried about any harmful files accessing my work partition.
View 5 Replies
View Related
Jan 7, 2013
Under computer I go to my drive of folders. When I click new folder either by right clicking or by hitting new folder the system then creates 2 or 3 new folders at one time. I then have to go back and delete the extra folders. At first I did not mind because it only happened once or twice and now it is every time.
View 4 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Aug 24, 2009
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies
View Related
Dec 14, 2012
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies
View Related
Nov 22, 2009
if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
View 3 Replies
View Related
May 28, 2012
now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image
View 2 Replies
View Related
Jun 23, 2011
I am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
View 5 Replies
View Related
Jun 10, 2011
I would like to create a new user for programming purposes i.e the user will have access to computer resources only through applications I plan to write. Such a user should not be able to log in from main Win7 logon screen - in fact, the user should not even be listed on that page.
View 1 Replies
View Related
Oct 30, 2009
why is it that making a simple DVD movie that is playable in your home DVD or Xbox 360 still so hard? it was difficult under Xp, same under Vista, and now it continues with Windows 7. The built-in DVD Maker and Movie Maker work sometimes, they can't burn many types of files, and you ahve to go through a 2 hour burning process before you find out the DVD has no sound during playback!
has anyone come up with or used a DVD authoring software that works all the time, effortlessly? even Nero is a finicky one
View 3 Replies
View Related
Nov 6, 2009
Can someone direct me to a place that I can read how to create backups using Windows 7.
View 6 Replies
View Related
Feb 27, 2012
I'm setting up my new desktop that has Windows 7 on it.I created a SHORT CUTS FOLDER on my old computer which had icons to run programs so my desktop wouldn't be cluttered.How do I setup something like this with Windows 7?I have the used all the time programs in plain view likethe Firefox browser. moranacus has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 5 Replies
View Related
Aug 6, 2011
I need to a system restore point file without getting into the desktop through Windows 7.
View 3 Replies
View Related
Jul 28, 2012
Today I wanted to create a partition on my WD 3 tb hard drive, so i opened disk manager and shrunk the current partition creating unalcolated space when i right clicked on it to create the new partition all the options were greyed out so i use partition magic to create the partition shortly after BOSD with error 0x00000078 or 7b not sure happened too fast and i have no clue how to get my computer working again, start up recovery has proved useless. i tryed the drive on my old computr and it worked just fine the new partition was there and useable. so can someone please explain how to fix this or if thats not posable please explain a way to get the inportant data(pictures word documents ect.) off my computer so i can reset it to factory settings without looseing anything?
View 2 Replies
View Related