BOSD After Creating A New Partition?
Jul 28, 2012
Today I wanted to create a partition on my WD 3 tb hard drive, so i opened disk manager and shrunk the current partition creating unalcolated space when i right clicked on it to create the new partition all the options were greyed out so i use partition magic to create the partition shortly after BOSD with error 0x00000078 or 7b not sure happened too fast and i have no clue how to get my computer working again, start up recovery has proved useless. i tryed the drive on my old computr and it worked just fine the new partition was there and useable. so can someone please explain how to fix this or if thats not posable please explain a way to get the inportant data(pictures word documents ect.) off my computer so i can reset it to factory settings without looseing anything?
View 2 Replies
ADVERTISEMENT
Apr 4, 2011
I have recently purchased a new Samsung NC110 netbook with Windows 7 Starter installed. However, I find it runs fairly slowly so I intend to install XP on it from an old installation disc.However, when I first started my netbook I set up a partition with 40Gb allocated to the C drive and the remaining 240 to a D drive. Not being that computer savvy I got confused and despite having a portable hard drive for back up and the computer having a separate hidden restore partition, I went ahead with this.My question is that if I start again with XP can I reset the partition to a single C drive with separate restore area?
View 13 Replies
View Related
Sep 15, 2011
I'm thinking of installing Windows 8 on my second hard drive. I'm downloading it right now.
I would like to create a new partition for it so that it isn't on the same volume with my data files. I've done this often using 3rd party software but never using Windows 7 disk manager.
I have my D: drive backed up and will update it before I try anything but is this reasonably straight forward or are there pitfalls I should look out for?
I could always format the disk create the partition and then after installing Windows 8 restore all my data to D: again, but I'd like to keep it as simple as possible. There's over 500 gigs of stuff on my 1TB drive.
View 3 Replies
View Related
Oct 30, 2012
I recently upgraded my Acer 722 netbook to an 265GB SSD and installed Windows 7 on it. I was wondering if there was a way to create a partition for a recovery environment (just in case something happens). I have a system image of this pc saved, however I feel it would be best to also create a recovery partition.
Note: This does not have a CD drive.
View 3 Replies
View Related
Jan 26, 2011
I have a new desktop computer with Windows 7. How might I create a DOS partition in the unused portion of the new hard drive. I would like to be able to use QuickBasic v4.5, and able to share the files I create in the DOS volume with the primary NTFS 64bit OS volume.
View 4 Replies
View Related
Oct 9, 2011
I want to install a Linux Distro on my laptop. I will post as much details as possible so that you can guide me about how to free up some space so that I can create new partitions for my Linux Distro.I currently use the Linux VM images in VMWare Workstation, however there are certain tasks I need to perform which require, Linux to be installed as an OS instead of running as a VM.I have an HP Laptop which came installed with Windows 7 Home Premium OS.
There are 2 partitions:
C: Drive (Windows Installed on this one)
D: Drive (Recovery)
DiskPart output:
Code: DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 E DVD-ROM 0 B No Media
Volume 1 G DVD-ROM 0 B No Media
[code]....
The column alignment is not proper, but hope it's clear that which is is the System Partition and which is the Boot Partition.Now, how do I free up some space on my HDD to be able to install a Linux Distro?I need about 25 GB of Hard drive space for linux including the swap partition.
View 2 Replies
View Related
Feb 10, 2012
My friend got a Dell laptop without any OS. I have a Win 7 disk but during the installation, the PC cannot find hard disks at all. I need help in creating a local disk C. The size is 640gigs and I want to use all of them.
View 9 Replies
View Related
Jun 3, 2010
I have used a DOS utility called copywipe 1.14 to wipe a hard drive for a clean installation of windows 7. However, the utility has not only removed all data from the hard drive, it has also deleted the primary partition and master boot record as far as I am aware. create a primary partition on the hard disk and get it active and ready to accept an installation of Windows 7. I have a bootable USB stick with the windows 7 installation files and prefer to use this for the install as the DVD drive is working inconsistently.However, I think that I need a bootable USB stick with the FDISK and FORMAT programs on it before using the other USB stick with the windows installation, or at least that is my understanding? If my understanding is correct, how do I get a bootable USB stick with the FDISK and FORMAT programs onto it?
View 9 Replies
View Related
Oct 17, 2011
I'll make this one short. I had some time ago a GX623 laptop that had a hidden partition from where I installed win7. If anything went wrong, i just asked the laptop on startup to run the recovery manager, and boom, factory settings in 20 minutes flat (cleaned HDD). Now I am planning to get myself a reduced version of the 780DX MSI laptop (normally 2 hdds in raid 0), and i want to get a SSD as boot and a fw extras drive. The problem is i wanted to have that hidden partition on the SSD (and i plan to buy it apart and put it in myself once i figure out the laptop is stable). How to create your own hidden OS install partition...
View 7 Replies
View Related
Dec 28, 2012
How I will create more partitions on our system. Bcz I cant more partition on installation time bcz system not permitting to do this job.what I do???
View 1 Replies
View Related
Feb 15, 2013
I am not sure if this is possible however is there a way of installing Windows 7, ctivating it with my OEM key and then created a recovery partition just in case I am ever in the situation where I need to run it using a hot key during boot?
View 8 Replies
View Related
Nov 2, 2009
After purchasing my new Student Version of Windows 7 Professional I was keen to do a full system format, and start fresh. I no longer had a need for the Dell Recovery Partition which contained Vista (and a decent amount of bloatware), so I removed all partitions from my disk to start with a blank 180GB HDD.
I thought to myself, if I am going to start fresh I might as well do things right and mimic Dell’s setup with a recovery partition of my own. Now to be fair, this isn’t an extremely wild idea as there are plenty of manufacturers and software companies who provide such solutions very simple and easy. Everyone knows that Norton Ghost is fantastic, and Acronis TrueImage is right there with them. Of course you can simply run-up Imagex along with WinPE and sysprep a WIM to re-image your HDD at anytime for a free solution.
However, all these solutions require that you have some sort of recovery media for boot time operation, and the Imagex solution isn’t for the faint of heart. Now I do a lot of travel, and I wanted a solution that didn’t require me to look after a bootable DVD or USB stick, and because I am working with a laptop I didn’t have second disk which I could boot from via BIOS settings. My recovery solution had to be a Primary Partition on my only HDD with boot time options (in case my system is completely rooted.)
This turned out to be quite the challenge, as Windows 7 / Vista no longer support the simple easy boot.ini file that allows you to manually adjust boot time parameters. Instead Windows 7 / Vista have moved onto some fancy form of bootsect / BCD (Boot Configuration Data) which is very difficult to edit manually. Thankfully all of my hard work paid off and I now have a self sufficient system with all the diagnostics and re-imaging tools I could ever need. And thanks to Windows 7’s new Backup and Restore options, I was also able to include a system image which contained all of my settings and applications so that I don’t have to sit through 10 hours of Windows Update again.
What I ended up with is a Primary partition on my HDD that is a full and complete bootable version of the Windows 7 installation media. When I choose this partition at boot time it is exactly as if I have inserted the Windows 7 Install DVD into my disk drive! I can utilise all of the tools in the Windows Recovery Console (which includes the option to restore from a previously created system image), or I can simply re-install Windows 7 from scratch - without affecting my restore partition or boot menu variables!
View 3 Replies
View Related
Aug 8, 2010
I have a computer with the F10 option when I first turn on the computer. The hard drive failed so I have replaced it and installed windows 7. I am wondering if I can create a recovery partition when I turn on the computer and use the F10 option to restore back to when I first installed windows 7?
View 9 Replies
View Related
Sep 5, 2012
I have a workstation on a gaming rig. I work and play games on it. I wanted to ask if I could separate my work files and GAMES setups (installed files) so they don't harm my work data.I do play games with cheats/hacks and they mostly contain malicious files which can damage my operating system. I want to create a seperate DISK image like Vmware in which I can run games without being worried about any harmful files accessing my work partition.
View 5 Replies
View Related
Jun 4, 2012
For the last few days Ive been having problems with my computer. I have been getting the BSOD every 20 minutes to 1.5 hours depending on if I'm using the computer or not. I have done a virus scan, reseated everything, and tested the HD and RAM with no errors found. I am competent with computers but have little experience troubleshooting. The Stop codes that I have been able to record are 0x00000050 and 0x00000101. I have attached 3 mini dumps that hopefully someone can use to help me figure out what is going on.
View 7 Replies
View Related
Jan 21, 2013
1. I have have issues with the computer not sleeping properly for the last couple months. Occasionally, instead of sleeping the screen will turn off but the computer will keep running and none of the keys will work, leaving the computer stuck in this state until I restart it manually or the battery dies.
2. In the last month or so, I started getting BOSDs. Here are the details from the BlueScreenViewer:
==================================================
Dump File : 012113-45443-01.dmp
Crash Time : 1/21/2013 12:56:24 AM
Bug Check String : BAD_POOL_HEADER
Bug Check Code : 0x00000019
[code]....
I've updated all the driver I could find, but haven't tried a clean install yet (I do have everything backed up) and have run AVG antivirus which hasn't come up with anything.
View 7 Replies
View Related
Jul 25, 2012
I no matter what game I play it will randomly crash the computer some games take longer to crash than others. I since it looked like a graphics card crash I decided to buy a new one to see if that would fix it. Other than a rise in fps I still get crashes. Also yes I have uninstalled old drivers and installed new ones for my hardware. I attached two zip files each with different BOSD's I have gotten.
[code]...
View 9 Replies
View Related
Jan 7, 2013
Under computer I go to my drive of folders. When I click new folder either by right clicking or by hitting new folder the system then creates 2 or 3 new folders at one time. I then have to go back and delete the extra folders. At first I did not mind because it only happened once or twice and now it is every time.
View 4 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
May 9, 2011
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies
View Related
Aug 29, 2012
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
View 4 Replies
View Related
Jul 10, 2011
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies
View Related
Oct 19, 2012
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies
View Related
Jul 1, 2012
When I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
View 4 Replies
View Related
Jul 1, 2010
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
View 9 Replies
View Related
Mar 30, 2011
i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
Dec 19, 2012
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies
View Related
Jun 10, 2011
I would like to create a new user for programming purposes i.e the user will have access to computer resources only through applications I plan to write. Such a user should not be able to log in from main Win7 logon screen - in fact, the user should not even be listed on that page.
View 1 Replies
View Related
Oct 30, 2009
why is it that making a simple DVD movie that is playable in your home DVD or Xbox 360 still so hard? it was difficult under Xp, same under Vista, and now it continues with Windows 7. The built-in DVD Maker and Movie Maker work sometimes, they can't burn many types of files, and you ahve to go through a 2 hour burning process before you find out the DVD has no sound during playback!
has anyone come up with or used a DVD authoring software that works all the time, effortlessly? even Nero is a finicky one
View 3 Replies
View Related
Nov 6, 2009
Can someone direct me to a place that I can read how to create backups using Windows 7.
View 6 Replies
View Related
