I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
i had windows 7 home premium and i had to formatt the HDD because was a problem with the windows installation, could not do recover because got into a eternal loop the system and had to use a version that friend of mine lean to me of windows 7 i do not erased the recover partition and i wish have access to this partition to get my windows version or try of install it from there again and have my own windows copy, how could i get access or unlock the recover partition and get the files and install windows from there.
View 1 Replies View RelatedI have bought a new hard drive to use as my main one, and am planning to use my current, larger one as backup, as i found i was not filling it. So i need to completely duplicate my current drive, a 1tb one, with 180gb of stuff, to my new 320gb drive. i have made a full disc image with driveimage xml, which comes to 180gb, but when i try to restore it to the 320gb one, it says it it too big. How do i gp about setting this up? do i need to copy the system reserved partition to the new drive too for windows 7 to work, or can it not be copied? should i install windows 7 to the new drive from my install disc? if so, how to i get my settings, programs and data back without too mcuh hassle?
View 2 Replies View Relatedi am running windows seven and i am asking how i can copy a partition from one drive to another. i got an old drive with one partition and a new one. The new one has windows seven on it and the old one has a old windows on it. i wanna have have both partitions so i can go to data of my old one and use the new one (everything on the new hard drive)
View 9 Replies View RelatedI install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies View RelatedAm I only allowed to make one copy of my Recovery partition?I have a Dell desktop, with a built in Dell recovery partition. I have read that. "You are only allowed to make ONE copy of your Recovery partition and it must be on to ROM CDs or DVDs."I didn't know that when I made a copy of C and recovery partition to my external drive,
I am a bit concered that I can only do this once. Is that strictly true?
Im a newbee and i made a diskcopy from my HD 1 TB to LA Cie USB disk 1 tb.The source disk have a * hidden recovery part,C: aktiv bootD: data diskAfter copy disk I saw a differens in the aktive boot part on the target disk with aboNow I deleted the aktiv boot part on the target disk and made a copypartiation from the sorce disk to the target and now it became exaktly the same.y questions:Will this copy work allright if I have to copy back all the parts.Using Minitool 7.1 bootable CD didnt find my target disk so I used Minitoolver 7.0 bootable cd and it works ! Whats the problem with 7.1
View 6 Replies View RelatedHow can I access a system partition to read and copy data? Two partitions were merged together and ended up as a system partition. All of my data files are in there.
View 5 Replies View RelatedWhen I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
View 4 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View Relatedthis is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedI have a Boot Camped Mac Mini with Windows 7. I recently needed to allocate more disk space to it as i only had a gig left, i booted into MacOS and used Disk Utility to make the Mac partition smaller, i rebooted into windows and downloaded software called 'Partition Wizard' from www.partitionwizard.com. I dragged the Windows partition all the way so that it used up all the Unallocated Space, it required a reboot to finsih and when it did it displayed an error such as thistatus:0xc0000255Info: The Windows Boot Configuration Data file is missing required informationI have the Installation Disk and i have tried repairing more than 3 times and it seemed to do nothing, so i tried using the CMD and bootrec.exe and now when i start the repair wizard it says there is no windows partition yet i can still try repairing things (Yet still does not repair anything). I downloaded EasyBCD but im on my Mac partition right now and its an exe, i have no clue how to run that within windows to try and repair the Bootloader. I do however have access to the BOOTCAMP partition through the mac side, and i can access all the files. Is there some way i can repair the bootloader through this?
View 6 Replies View RelatedI wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies View RelatedI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View RelatedI'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedI currently have Windows 7 64 bit installed in two partiions:C: drive and E drive. Everytime I start, windows from the C: partition automatically boots. How do I get the Windows from E drive to boot? Ultimately I'd like to use the windows from E drive (which has all my installed software) and delete the one from C: drive. The problem is that I installed the one on C: drive most recently. (Long story short, I tried to delete and old version of windows unsuccessfully, and had to unmount and reformat the partition.)When I go to System Configuration under the Boot tab, I only see Windows in one partition (C: drive), so it won't allow me to delete that.
View 2 Replies View RelatedI normally run Windows 7. Today I decided to try out Windows 8 as well. I went into Disk manager and created a partition. I then booted off of my Windows 8 DVD and installed it on that partition. Now, my computer is only booting into Windows 8. What I really want is an option to choose which OS to boot into, but I would really like to be able to get back to Windows 7.
View 3 Replies View RelatedLast night i completed my installation of Windows 7, on new Harddrive.
The disk is partioned in 3 partitions (C,D,E)
C = WinXP
D = Windows 7
E = Data
I started with Windows 7 installation (on partition D). Last night it was completed.
I then format my partition C: and now I can't boot up to Windows 7.
My installation is on a USB.
What can i do??
I installed Windows 7 on my second hard drive g: (1st partition drive 1) and Windows set up a dual boot with Windows XP on the C: drive (1st partition drive 0) and Windows 7 on the G: drive (1st partition drive 1). Everything worked fine for months until I decided to dump Windows XP to try out Windows 8. I created an Win 8 installation USB FOB. I deleted the old XP Partition on C: then the install failed and I could not boot, (c: was deleted).No problem (I thought), I just swapped the hard drives to boot off my Windows 7 partition. Surprise! It won't boot either. I tried using partition Wizard to repair the MBR, from another computer. That didn't workThen I created a Windows 7 installation USB FOB (no CD drive on target computer), to see if Windows repair would take care of the problem. It could find no Windows installation. So I selected start up repair, it ran for a few minutes then said it was going to reboot, so I pressed the finish button.[CODE]
View 2 Replies View RelatedThis tutorial describes how to install Windows XP and Windows 7 on the same partition (first tutorial for one partition written).The short concept: Install XP twice and have 7 replace the first installation.Need more testers to confirm it works for everyone and the instructions are clear enough.Requirements: Both Installation discsA Windows XP LiveCD (might work with other OS, but no guarantees)EasyBCD.Install Windows XP normally if you're not already running it.Don't bother installing any drivers or software on it.Start another installation of Windows XP. Choose the same hard drive and leave it unchanged without formatting. When it asks you what to do then choose to install in a different directory "C:Windows.xp".Finish installing that one and only the necessary drivers.afterwards.Install Windows 7 on C: over the regular C:windows. A warning will tell you that it will move the old files to "Windows.old" directory. The good thing is it doesn't touch the Windows.xp directory.Install and run EasyBCD. Go to "Add/Remove Entries" and add an entry of "Windows NT/2k/XP/2k3" type and a name of your choice. (as shown in the attached image)Don't forget the "Save" button.You may also want to adjust the loader timeout from "Change Settings".In C: you will find a (hidden) file "boot.saved". Open it, remove the entry to the "WINDOWS" directory and make the "WINDOWS.XP" your default one (if it's not) and save as boot.ini".Restart and boot from the Windows XP LiveCD (which you should have burned and tested on CD or DVD before starting).Open the Command Prompt (Run "cmd") and enter the following lines in order
[code]...
I installed Win7 on the same Partition as WinXP. I was in a hurry and forgot totally to partition the HD before I installed, was doing 100 things on the side during the Installation, and noticed my mistake only after the install was complete. Is there any way I can do a Multi boot for those two OS now? The WinXP folder has been renamed to Windows.old, and even with EasyBCD there's no way I can get the Comp to boot into WinXP.
View 2 Replies View RelatedI recently installed a 90GB Kingston Technology SSD and then created a shadow copy of my previous hard drive (which was 62.4GB), meaning that currently I only have access to this amount of space on the new hard drive.
resize this boot partition to allow me to use all the space currently unallocated?
So long story short, my current os (w7) is installed on a non-boot partition of a now internal drive that used to be external. This wasn't an issue/I didn't notice because I had another unused internal hdd which DID have an old bootable os partition, and then I'd just choose the correct instance of Windows when that one booted.I have to get rid of the old HDD with the bootable partition. Is there anyway I can change the non bootable my currant OS is on to a bootable partition (ie thru windows, cmd, bios etc)
View 7 Replies View RelatedMy Old HDD crashed, it had windows 7 x64 on a D: logical drive with an extended partition. My old HDD also had two other primary partitions one of which probably had some system/boot files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to create a new system partition with boot files to be able to boot my Win 7.
View 7 Replies View RelatedIs there a way to install Windows 7 in a different folder than the default Windows and on a different partition than the boot. For example, I have XP installed on my Laptop that has 3 partitions C:, D:, E:. C: is my boot partition and D: is where I have XP install in directory D:OSWINXP and E: where applications are installed and data is store.
I like to install Windows 7 and have C: as the boot drive and install it on D: in the sub directory D:OSWindows or D:OSWindows 7.
I installed DOS into 2GB FAT 16, then installed Windows 7 Ultimate expecting Windows 7 to install itself in a partition with a drive letter other than C (just as XP had done in a previous dual-boot setting with DOS) But no, Windows 7 has hijacked the C drive letter for itself. How can I stop Windows 7 from "stealing" from DOS, the drive letter C, for itself?
View 5 Replies View RelatedI tried resizing my C drive but got an error message. It said something about dynamic discs ??after that when i tried to restart my hp laptop i got this error message:The message on boot states "windows failed to load. A recent hardware or software change may be the cause."The status is "Oxc000000f".The description is "The boot selection failed because a required device is inaccessible"what can i do to fix this problem? i am running check disc like the system suggested, but if it doesn't give me a solution will i need to re install or recover Windows 7 with my back up discs or using HP's system recovery?
View 5 Replies View Related
