Need To Copy System Reserved Partition To New Drive Too For Windows 7 To Work
Sep 11, 2010
I have bought a new hard drive to use as my main one, and am planning to use my current, larger one as backup, as i found i was not filling it. So i need to completely duplicate my current drive, a 1tb one, with 180gb of stuff, to my new 320gb drive. i have made a full disc image with driveimage xml, which comes to 180gb, but when i try to restore it to the 320gb one, it says it it too big. How do i gp about setting this up? do i need to copy the system reserved partition to the new drive too for windows 7 to work, or can it not be copied? should i install windows 7 to the new drive from my install disc? if so, how to i get my settings, programs and data back without too mcuh hassle?
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
I've taken a 1TB SATA HDD from a second computer which had Windows 7 OS on it. I have housed it in an external caddy to use as a backup drive for my primary computer. It comes up as two paritions G and H. I've formatted G to give me a 931Gb drive and I have a H drive with 99.9MB which is the System Reserved from the previous Windows 7 install.Can I format the System Reserved partition on the external drive and combine the two partitions to create one external backup HDD?? If I need software tools to do this are there any freeware tools that would do this?
i have been trying to install a RAID array on my system, and due to some complications ended up having to reinstall windoiws from the master CD, now i noticve it has created a drive called "system reserved" - the volume is only 99.8 MB - when i open the drive it contains nothing at all? what is it / how do i get rid of it?
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition? - And during the reinstall could I do so that this partition is not created anymore?
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
Right now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
For some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
I accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
I've two HDD connected to my system , a 1TB & an 160 GB . But now i want to remove the 160 GB HDD . But i noticed a weird problem when i opened disk management . Here is a screenshot :
As you can see my OS ( Win 7 ) is installed on C: drive which is on Disk 1 . While its System reserved partition is on Disk 0 . Now since I have to remove Disk 0 , The System reserved partition has to be moved to Disk 1 . I don't wanna reinstall the OS , so how can i shift the System reserved partition (With all its contents ) from Disk 0 to Disk 1 .?? :-?
When originally installing Windows 7 Ultimate I noticed it created a 100mb system reserved partition. No probs.
Recently I turned on AHCI in my bios and attempted to do a clean install. This time WinPE did not create a reserved partition and despite creating an 80gb partition to install windows on it said “Setup was unable to create a new system partition or locate an existing system partition.”
Install refused to proceed any further, pointing me to some log files I could not find. I booted from my repair disk and tried to make the partition active, which was already marked as active and tried again. No luck.
I had deleted all partitions on the drive.
So I turned off AHCI and tried again. I missed the "press any key".. and system complained about a "Master boot record error".. I rebooted and tried to do install again. Same issue.
I was able to recover my system from an image I created earlier, but I sure would like to know why the reserved partition was not created, and why windows refused to install. Because I'm going to try again.
I have purchased a new HDD, one that is supposed to be much faster than my old one, which of course has not been formatted. I tried that drive with and without AHCI and had the sasme issues.
I am gonna do a format reinstall of Windows 7 and I noticed this partition which I believe was created when I first installed Windows 7. Should I just leave it there or can i delete this partition when I format reinstall Windows?
I've added another HDD to my system. On my older HDD which is 1 TB, 3Gb/s,w/6b of cashe. I have two partitions on it called System Reserved (100 Mb) and Back Up Disk (250 Gb). The newer HDD is 1 TB, 6Gb/s w/32Mb of cashe.My PC will handle the 6 Gb/s transfer rate.Should I put these partitions on the newer faster drive?Can I and/or should I combine these partitions?If I can combine them what size should I make a new Partition @150GB?s above will also relate to the moving the BackUp files too?I've estimated what i think the size of the partitions above should be, should I change them? Down the road I'd like to multl boot with Linux and XP Pro I'm using Windows 7 64b Ultimate it's on a SSD all by itself?
I have a bit of a problem. I recently got a new SSD and configured it to make it my boot drive. I kept my old installation on my hdd and also made a new partition on that device to hold all of the program files, data, etc. Whenever I was finished installing all the programs that I had on my old setup on my new setup and had transfered all necessary documents, I figured it was time to remove the old partition and expand the new data partition to fill the drive. I used gparted to delete the old one and expand the new one.
For some reason, whenever I installed windows 7 on my ssd, it never created a system reserved partition. Everything booted up fine. After deleting my old partition, my system now fails to boot up and gives me the message "BootMGR is missing. Press CTRL+ALT+DEL to restart". Clearly, my computer is now wanting a system reserved partition.
My question is, how do I create a system reserved partition AFTER Windows 7 has been installed?
I have already tried startup repair and all of the bootrec.exe commands, but none of them seem to work.
I've had W7 on two computers that I built: My old one and my new one On the old comuter, W7 installed itself, boot loader and all, on a single partition. However, on my new build, W7 created a 100 mb "system reserved" partition leaving 111 G for data on one of my SSD's which I decided to use for other purposes ( W7 is installed on a second SSD which is partitioned as mentioned). Then, Using "disk management", I deleted the 100 mb partition on the SSD that I wish to use for other purposes, then tried to expand the 111 GB. I got some kind of useless message that said "object does not support this operation". So, the 100 mb "System Reserved" partition is not shown in "disk management" and is not available, nor can I restore it to use.
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes]. I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
I already have windows 7 Ulitmate x86 but 1 day I came up with an idea of giving a try on x64 one by dual booting.. So I downloaded it legally from microsoft and I did every procedures required for the install. Shrunk my C drive and installed the OS on the unallocated free space on the drive and it went on perfectly. But the problem is the System Reserved partition showed up on the x86 OS. every time i open My Computer i can see the system reserved partition.
I could accidentally do something wrong with the partition if it remains unhidden so I want to hide it. I was thinking of changing the drive letter but I afraid that's going to give me boot problem. In disk management the System Reserved is labelled Z and marked as active. I tried to set my other partition as active that day but the pc cannot boot at all not even the boot manager showed up. However I managed to fix it using my recovery disc to access the cmd and reactivate the Z drive using diskpart.
I am planning on building myself a new computer and I am using the same hard drive as I am currently and I wanted to reinstall win 7 and clear my hard drive to have a new start as my hard drive is currently full of junk .So I was wondering if I reinstall win 7 on the same hard drive will the copy still work or will I have to buy a new license/serial key.
How can I access a system partition to read and copy data? Two partitions were merged together and ended up as a system partition. All of my data files are in there.
i am running windows seven and i am asking how i can copy a partition from one drive to another. i got an old drive with one partition and a new one. The new one has windows seven on it and the old one has a old windows on it. i wanna have have both partitions so i can go to data of my old one and use the new one (everything on the new hard drive)
Someone spilled a liquid on my wife's laptop damaging the keyboard and internals. It cannot boot but I need to get the files from the HD. I bought one of those USB to laptop HD cables, removed the HD and hooked the cable to my desktop Windows 7 PC. The drive came up as "System Reserved" with only the boot sector folders visible. I hooked it to an XP PC and autoplay showed all the folders but I couldn't see them in "Computer." I tried backing everything up to a DVD but it failed for some reason. This somehow may have damaged the drive.The drive now appears and disappears in device manager. When it's listed, it shows as working properly but no longer shows up in Computer or Disk Management. Any chance of getting files off of the laptop HD?
i have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
I need contents of Lenovo_part oem reserved partition of lenovo ideapad z570 notebook? this partition is factory build and hidden. I have accidentally deleted that without having backup.
i was trying to reformat my pc last night (windows 7 to windows 7, just doing a clean reformat).now, i have 3 partitions in my hdd. system reserve, OS partition and my personal partition. i decided to delete my OS partition, then proceeded to delete my system reserve (it allowed me to, don't know why). I then created a new partition. My pc now has only 2 partitions. When I try to install to my new OS partition, it says that "Setup was unable to create a new system partition blah blah" The usual msg. I tried doing the Active thingy on the diskpart but I still can't install my Windows 7
im looking to get new harddrive and was wondering isit possible to copy whole os to new hdd?
meaning like copy whole os to new hdd so i dont have to reinstall all my programs because im going to use my current hdd as external storage using caddy and my new hdd as my sole drive
ive been told theres some program called ghost something that does it,,is this true or even possible
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
I bought a new computer where Windows 7 is already pre-installed on partition C:. In addition I want now to install a second "test" Windows 7 system on new primary partition. And a logical "data" partition. At startup I want to choose later between the 2 Windows 7 systems which one I want to boot.
When I inspect now the current partition table (before changing it) it looks like: 1.) "Recovery" 10 GB Primary MBR NTFS 2.) "System Reserved" 100 MB Primary NTFS, Active, System 3.) "Local Volume" 30 GB Primary MBR NTFS Boot 4.) Unallocated
As you can I have a problem: If I create a new, 4 th primary, bootable partition with 30 GB into the "unallocated" space, then all maximum 4 primary partitions are filled. I cannot create a 5 th primary partition which contains the logical "data" partition. So I guess I must either destroy "Recovery" or "System Reserved" primary partition to have one more primary partition slot available.
Now what for are the "Recovery" and the "System reserved" partition? I don't know them from WinXP. Are they Windows 7 specific? Or are they "inventions" from the computer manufacturer (Sony)? Is "Recovery" absolutely necessary? Why is "System Reserved" active? From I WinXP I know only partitions as active which hold the OS and not some kind of "pre-boot-partitions"
I restored Windows 7 Home Premium (64 bit version) on my PC and I used Easeus Todo Backup v4.0.0.2. to do this. I restored the hidden reserved partition and also the Windows partition (my C: drive). However, the restoration altered the size of both of these partitions. It has reduced the reserved partition from 100 Mb to 99.7 Mb and I'm guessing it must have increased the C: partition and used the 0.3Mb reduced from the hidden partition (I can't remember the original size of my C: partition)? Will the reduction in size of the reserved partition from 100Mb to 99.7Mb have any implications? Does anyone know why this should happen and should I use a partition manager to put it back to 100Mb?
