100Mb Reserved Partition Reduced In Size By Backup Software?
Jul 2, 2012
I restored Windows 7 Home Premium (64 bit version) on my PC and I used Easeus Todo Backup v4.0.0.2. to do this. I restored the hidden reserved partition and also the Windows partition (my C: drive). However, the restoration altered the size of both of these partitions. It has reduced the reserved partition from 100 Mb to 99.7 Mb and I'm guessing it must have increased the C: partition and used the 0.3Mb reduced from the hidden partition (I can't remember the original size of my C: partition)? Will the reduction in size of the reserved partition from 100Mb to 99.7Mb have any implications? Does anyone know why this should happen and should I use a partition manager to put it back to 100Mb?
View 8 Replies
ADVERTISEMENT
Nov 18, 2012
I am gonna do a format reinstall of Windows 7 and I noticed this partition which I believe was created when I first installed Windows 7. Should I just leave it there or can i delete this partition when I format reinstall Windows?
View 1 Replies
View Related
Jul 14, 2012
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
View 3 Replies
View Related
May 28, 2012
I've added another HDD to my system. On my older HDD which is 1 TB, 3Gb/s,w/6b of cashe. I have two partitions on it called System Reserved (100 Mb) and Back Up Disk (250 Gb). The newer HDD is 1 TB, 6Gb/s w/32Mb of cashe.My PC will handle the 6 Gb/s transfer rate.Should I put these partitions on the newer faster drive?Can I and/or should I combine these partitions?If I can combine them what size should I make a new Partition @150GB?s above will also relate to the moving the BackUp files too?I've estimated what i think the size of the partitions above should be, should I change them? Down the road I'd like to multl boot with Linux and XP Pro I'm using Windows 7 64b Ultimate it's on a SSD all by itself?
View 7 Replies
View Related
Sep 28, 2012
guys i had a little bit problem with this 100mb System Reserved drive.it appeared on my Hard Disk Drives on my computer as Local Disk.
View 2 Replies
View Related
Mar 26, 2012
How do I eliminate the 100mb partition when doing a clean install? I will be doing this soon and would like to eliminate this.
View 4 Replies
View Related
Oct 22, 2009
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies
View Related
Oct 30, 2009
I had to reinstall Windows 7.
I guess the first install made the 100MB partition because it saw WinXP on my old partition. On second Windows 7 install this partition became free, boot files now at c:
The dumb thing is the 100MB partition was renamed D:
I was able to rename it F: just to get it out of the way of my normal naming convention, D for flight sim, E for games and other stuff.
How can I merge this 100MB partition with one of my other (D or E)?
Another thing, C,D and E are "primary" partitions. I am used to see a few "extended". Is this ok? Only the 100MB partition became "extended".
View 7 Replies
View Related
Aug 8, 2009
In my reading, I got the impression there is supposed to be a 100 MB system partition installed as part of the Win 7 installation. I don't see this partition on my system even looking at it with Acronis Disk Director.
If I am right that there is supposed to be this system partition, it sounds like it could be a problem down the road that I don't have it. Is there any way to get this partition installed on my system w/o doing a new clean install and, if so, what would be the procedure?
View 7 Replies
View Related
Sep 7, 2012
I have been running windows7 for a year now on my pc. Its super fast and I love it. However; I have struggled to get Home Groups to work, and there are some other aggravating issues that I think I'll clear up by re-installign windows. I'll be using my family pack of Windows7 Upgrade DVDs to get it done. Currently, I have a kingston 128 (maybe its bigger, don't recall) SSD that I keep my OS on. I have a 1TB HDD that I keep my data, user profiles, and all temp files on. So, I currently have a drive letter "D" that is the 100MB reserved partition. I already don't like keeping all my stuff on a second drive, but the idea that its on "F" is really odd to me.
View 5 Replies
View Related
Apr 24, 2012
I want to know what is in the 100mb System Partition of my drive, and if i could the windows installation CD to format/delete it.
View 11 Replies
View Related
Sep 20, 2012
I want to remove the 100mb partition W7 created when i installed it the first time (my hd is 3tb and i need to get rid of it because it uses a primary partition slot i need it for something else).Say I use a tool like paragon disk manager or acronis disk director... delete and remove that 100 mb partition... and then use the W7 recovery bootable cd..
View 4 Replies
View Related
Apr 24, 2012
Right now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
View 2 Replies
View Related
Dec 22, 2011
For some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
View 8 Replies
View Related
Jan 6, 2012
I accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
View 8 Replies
View Related
Feb 25, 2012
I've two HDD connected to my system , a 1TB & an 160 GB . But now i want to remove the 160 GB HDD . But i noticed a weird problem when i opened disk management . Here is a screenshot :
As you can see my OS ( Win 7 ) is installed on C: drive which is on Disk 1 . While its System reserved partition is on Disk 0 . Now since I have to remove Disk 0 , The System reserved partition has to be moved to Disk 1 . I don't wanna reinstall the OS , so how can i shift the System reserved partition (With all its contents ) from Disk 0 to Disk 1 .?? :-?
View 9 Replies
View Related
Dec 22, 2009
When originally installing Windows 7 Ultimate I noticed it created a 100mb system reserved partition. No probs.
Recently I turned on AHCI in my bios and attempted to do a clean install. This time WinPE did not create a reserved partition and despite creating an 80gb partition to install windows on it said “Setup was unable to create a new system partition or locate an existing system partition.”
Install refused to proceed any further, pointing me to some log files I could not find. I booted from my repair disk and tried to make the partition active, which was already marked as active and tried again. No luck.
I had deleted all partitions on the drive.
So I turned off AHCI and tried again. I missed the "press any key".. and system complained about a "Master boot record error".. I rebooted and tried to do install again. Same issue.
I was able to recover my system from an image I created earlier, but I sure would like to know why the reserved partition was not created, and why windows refused to install. Because I'm going to try again.
I have purchased a new HDD, one that is supposed to be much faster than my old one, which of course has not been formatted. I tried that drive with and without AHCI and had the sasme issues.
View 2 Replies
View Related
Mar 16, 2010
How to Delete the Windows 7 100MB System Reserved Partition ?
View 0 Replies
View Related
Jan 7, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
Apr 9, 2010
I have a bit of a problem. I recently got a new SSD and configured it to make it my boot drive. I kept my old installation on my hdd and also made a new partition on that device to hold all of the program files, data, etc. Whenever I was finished installing all the programs that I had on my old setup on my new setup and had transfered all necessary documents, I figured it was time to remove the old partition and expand the new data partition to fill the drive. I used gparted to delete the old one and expand the new one.
For some reason, whenever I installed windows 7 on my ssd, it never created a system reserved partition. Everything booted up fine. After deleting my old partition, my system now fails to boot up and gives me the message "BootMGR is missing. Press CTRL+ALT+DEL to restart". Clearly, my computer is now wanting a system reserved partition.
My question is, how do I create a system reserved partition AFTER Windows 7 has been installed?
I have already tried startup repair and all of the bootrec.exe commands, but none of them seem to work.
View 4 Replies
View Related
Mar 22, 2012
I need contents of Lenovo_part oem reserved partition of lenovo ideapad z570 notebook? this partition is factory build and hidden. I have accidentally deleted that without having backup.
View 1 Replies
View Related
Feb 23, 2011
I've taken a 1TB SATA HDD from a second computer which had Windows 7 OS on it. I have housed it in an external caddy to use as a backup drive for my primary computer. It comes up as two paritions G and H. I've formatted G to give me a 931Gb drive and I have a H drive with 99.9MB which is the System Reserved from the previous Windows 7 install.Can I format the System Reserved partition on the external drive and combine the two partitions to create one external backup HDD?? If I need software tools to do this are there any freeware tools that would do this?
View 4 Replies
View Related
Jun 28, 2010
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition?
- And during the reinstall could I do so that this partition is not created anymore?
View 9 Replies
View Related
Sep 11, 2010
I have bought a new hard drive to use as my main one, and am planning to use my current, larger one as backup, as i found i was not filling it. So i need to completely duplicate my current drive, a 1tb one, with 180gb of stuff, to my new 320gb drive. i have made a full disc image with driveimage xml, which comes to 180gb, but when i try to restore it to the 320gb one, it says it it too big. How do i gp about setting this up? do i need to copy the system reserved partition to the new drive too for windows 7 to work, or can it not be copied? should i install windows 7 to the new drive from my install disc? if so, how to i get my settings, programs and data back without too mcuh hassle?
View 2 Replies
View Related
Feb 16, 2012
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
View 5 Replies
View Related
Dec 29, 2010
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
View 9 Replies
View Related
Apr 9, 2012
I've had W7 on two computers that I built: My old one and my new one On the old comuter, W7 installed itself, boot loader and all, on a single partition. However, on my new build, W7 created a 100 mb "system reserved" partition leaving 111 G for data on one of my SSD's which I decided to use for other purposes ( W7 is installed on a second SSD which is partitioned as mentioned). Then, Using "disk management", I deleted the 100 mb partition on the SSD that I wish to use for other purposes, then tried to expand the 111 GB. I got some kind of useless message that said "object does not support this operation". So, the 100 mb "System Reserved" partition is not shown in "disk management" and is not available, nor can I restore it to use.
View 4 Replies
View Related
Jun 16, 2011
i have been trying to install a RAID array on my system, and due to some complications ended up having to reinstall windoiws from the master CD, now i noticve it has created a drive called "system reserved" - the volume is only 99.8 MB - when i open the drive it contains nothing at all? what is it / how do i get rid of it?
View 6 Replies
View Related
Nov 14, 2009
I have a question about System Image Backups. (Win 7 Ultimate, 64-bit).
I have setup System Image Backups to my external 1TB eSATA drive.
I have chosen to allow Windows to manage the space used for backup history, Windows says it will use up to 279GB (which is fine).
The properties on the actual "Windows Image Backup" folder on the external drive shows the size as 32.6GB. However The Windows backup menu "Manage Windows Backup disk space" shows "System Image: 68.90 GB."
Primary Question:
Is Windows Backup storing my system images somewhere else in addition to this folder, or is the menu just plain wrong?
Additional Question: Is the Windows Backup utility capable of doing differential backups for the system image, or is each backup a full backup? The GUI menus are not giving me enough information. Based on what I see, it looks like System Image backups are always full, and data files are incremental or differential.
View 4 Replies
View Related
Nov 19, 2009
When I backup to an external USB drive, Explorer shows the 2 folders created (WindowsImageBackup and MYNAME-PC) as having 0 bytes, 0 files and 0 folders when right clicking those folders and looking at Properties.
Yet, if I right click the drive icon, Properties shows the drive with 15GB of used space.
Is this normal? I'm not using third party software for the backup.
View 2 Replies
View Related
May 14, 2011
How can i create a backup for windows 7 using the only drive C size of (600GB)?
View 11 Replies
View Related
