I want to remove the 100mb partition W7 created when i installed it the first time (my hd is 3tb and i need to get rid of it because it uses a primary partition slot i need it for something else).Say I use a tool like paragon disk manager or acronis disk director... delete and remove that 100 mb partition... and then use the W7 recovery bootable cd..
I guess the first install made the 100MB partition because it saw WinXP on my old partition. On second Windows 7 install this partition became free, boot files now at c:
The dumb thing is the 100MB partition was renamed D:
I was able to rename it F: just to get it out of the way of my normal naming convention, D for flight sim, E for games and other stuff.
How can I merge this 100MB partition with one of my other (D or E)?
Another thing, C,D and E are "primary" partitions. I am used to see a few "extended". Is this ok? Only the 100MB partition became "extended".
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
In my reading, I got the impression there is supposed to be a 100 MB system partition installed as part of the Win 7 installation. I don't see this partition on my system even looking at it with Acronis Disk Director.
If I am right that there is supposed to be this system partition, it sounds like it could be a problem down the road that I don't have it. Is there any way to get this partition installed on my system w/o doing a new clean install and, if so, what would be the procedure?
I have been running windows7 for a year now on my pc. Its super fast and I love it. However; I have struggled to get Home Groups to work, and there are some other aggravating issues that I think I'll clear up by re-installign windows. I'll be using my family pack of Windows7 Upgrade DVDs to get it done. Currently, I have a kingston 128 (maybe its bigger, don't recall) SSD that I keep my OS on. I have a 1TB HDD that I keep my data, user profiles, and all temp files on. So, I currently have a drive letter "D" that is the 100MB reserved partition. I already don't like keeping all my stuff on a second drive, but the idea that its on "F" is really odd to me.
I am gonna do a format reinstall of Windows 7 and I noticed this partition which I believe was created when I first installed Windows 7. Should I just leave it there or can i delete this partition when I format reinstall Windows?
I restored Windows 7 Home Premium (64 bit version) on my PC and I used Easeus Todo Backup v4.0.0.2. to do this. I restored the hidden reserved partition and also the Windows partition (my C: drive). However, the restoration altered the size of both of these partitions. It has reduced the reserved partition from 100 Mb to 99.7 Mb and I'm guessing it must have increased the C: partition and used the 0.3Mb reduced from the hidden partition (I can't remember the original size of my C: partition)? Will the reduction in size of the reserved partition from 100Mb to 99.7Mb have any implications? Does anyone know why this should happen and should I use a partition manager to put it back to 100Mb?
i have a laptop. the old windows is not genuine then i started to install the new windows is genuine but the old windows is still remain. how can i remove the old windows.?
Something very strange has started happening in Windows Explorer. When I cut and paste image files into different folders, it does copy everything but for some reason, a few tmp files are being created as well. Every time I copy stuff, I have to delete about 5-6 of them.Does anyone have any ideas as to why this is happening? It's started in the past few months and I've been hoping it would stop but it hasn't.
I have a problem with the folders in windows explorer in windows 7.Often windows explorer automatically creates unwanted folders who I cant recognize. Often some folders have been splitted in 2 or more folders. One example is that it had been created 2 folders of my "bon jovi"-folder. One of them has the original name "bon jovi" and the new folder has the name "jon bon jovi". Strange behaviour by windows explorer.Or just one file is saved in a folder and a subfolder, which have names based on the files name, often the artist and album. If I download one file, I want it saved in "my music"-folder "bare", not hidden in 1 or 2 folders.Suddenly, after 15 mins or so, a lot of new unwanted folders appeared in "my music" with subfolders and just one mp3-file. The new folders were created just some minutes ago. The numbers of folders in "my music" has increased much.Many of the mp3-files are downloaded from dc++, but the settings in dc++ is correct. The files are saved in "my music"-folder.Ive tried to change the foldersettings in windows explorer, f.ex organise -> reset folders, but it doesnt help
Since I intalled Win 7 on my computer, I have nouse for the partion that came with the computeroriginally. I have already deleted all the files inthe partition, so there is nothing I have to worryabout.What I want to know is what is the correct wayto remove the partition safely so I can recoverthat space.
When Microsoft first allowed a peek at Windows 8, I created a 50gb partition on my C: drive so I could take a look at it. Now, after reading about some horror stories about Microsoft's removal of support for several functions I find quite useful in Windows 7 especially its downgrading of support for DVDs, I would like to remove the partition I allocated to Windows 8 and reclaim the space on my C: drive for Windows 7. Can this be done easily without reformatting? I think I'll hang around with Windows 7 until I know more about Microsoft's intentions.
finally getting around to my first win 7 install on my new 120 gb mushkin chronos deluxe.I am using tweakhounds win 7 install guide found here: TweakHound - Installing Windows 7 particullary, I am trying to avoid the 100 mb loss:
Quote: Code: *Avoiding the 200MB partition: Folks have discovered that on an unpartitioned drive Windows 7 will create a 200MB system partition. This is easily avoided by creating a partition before attempting to install Windows 7 (see above). (for some this partition will be 100MB)**Exception for SSD drives to avoid the 200MB partition and partition / format the drive.Partitioning is a little different for SSD (Solid State Drives). This is because of something called NTFS partition alignment. Basically this refers to where on the drive the partition starts. Vista and 7 will create a single partition optimally for SSD's. XP and most program boot disks will not. If possible you should partition the disk under an already installed Windows 7 or Windows Vista machine and then proceed with the usual installation steps. If not then this is the way to do it:
Windows 7 Installation Advanced Drive Formatting
1 - Boot up from the Windows 7 installation disc.
2 - Choose Repair your computer.
3 - In the System Recovery Options screen, choose Use recovery tools... and click Next.
4 - Open the Command Prompt.
5 - Type diskpart and hit Enter.
6 - Type list disk . Find the disk you wish to install Windows 7 on. If you only have one disk then it will show as disk 0. If you have multiple disks find the drive you wish to install 7 on.
7 - Type select disk 0 (or use the number of the disk you wish to install Windows 7 on)(note - that is a zero)
8 - Type list partition. There shouldn't be any.
9 - Type create partition primary.
10- Type select partition 1.
11- Type active.
12- Type format quick.
13- When finished reboot and begin your installation.
( DiskPart Command-Line Options ) After reboot, the ssd shows as having 100 mb used and is listed as a system drive.
So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
I have a HP Notebook and it has a 12 gb unused partition that I tried to delete that was used for "HP System Recovery" (Press F10) which reinstalled XP each time from the original installation . Now that is not needed because I am using Acronis Home 2010 Disk Imaging and can restore my computer with the recovery CD I have made as part of this program. I can see in my computer management/ disk management console that this is still there.
It says 12.18 gb "unallocated" I wish to free this up and use it as part of my C: drive
Can I use the "Extend Volume" Wizard to increase the size of my disk space and remove this unallocated space?
i've fitted a new hard drive into my laptop and want to get rid of the recovery partition on the one i've removed.I've formatted it via Disc Management but the 15gb Recovery Partition remains there. Is there a way to format it so that i get the maximum amount of disc space.
I have recently installed a 64bit version of Windows 7 on my computer without removing the old one(32bit). The reason for not removing the old one was that my DVD writer broke so I had to install the 64bit version while still using the 32bit version. I borrowed a friend's memory stick, put the window 7 disc's contents on the USB. I then made it into an image and mounted it. The installation was perfectly fine, got new drivers and all, but when I tried to format(or delete) the C partition on which I have my 32bit windows installed it displayed the following error message http://puu.sh/1YRwa I then stopped the old OS from booting, but I'm stuck here. I still can not format the partition, as it's still a system partition.
I made a dual boot system about a month and a half ago and I now no longer have need of Windows XP. Windows 7 is my primary OS, so how do I go about removing the XP partition?
Hope someone here can point me in the right direction. I currently have a dual boot machine. Win7 and Vista. I bought the machine with Vista and shortly after 7 came out. So I installed 7 and never looked back at Vista. I want to delete the Vista partition so I can regain space on the drive but it wont let me. It's an active primary partition. Even though I am logged into 7 it says that I can't delete a primary partition.
I removed the mirror for my 2 hardrive to reinstall Windows 7 & sp1. I am now unable to remirror(greyed out) or reformat that 2nd drive as it is still showing as a system volume partion.
I use WMP 12 to rip cd's to the WMP library. I insert the disc and rip it in WAV format. After the rip is complete, the last song on the CD appears in a separate folder that does not transfer to a media player with the other songs in the primary folder.The last song appears as Unknown artist and title.
I want to delete the hidden primary partition that came by default from transcend 4 GB pen drive model TS4GJFV30. It is preventing the drive to boot with windows 7. Also it is not allowing the drive to play media files on media peripherals.
I've taken a 1TB SATA HDD from a second computer which had Windows 7 OS on it. I have housed it in an external caddy to use as a backup drive for my primary computer. It comes up as two paritions G and H. I've formatted G to give me a 931Gb drive and I have a H drive with 99.9MB which is the System Reserved from the previous Windows 7 install.Can I format the System Reserved partition on the external drive and combine the two partitions to create one external backup HDD?? If I need software tools to do this are there any freeware tools that would do this?
Is there an easy way to determine what files an installation has created ? More specifically i am interested in drivers that have been installed. I know i could do a 'before' and 'after' on various folders or i could turn on windows installer tracing but the product i'm interested in is ALREADY installed.
I had to use the Dell Back up and Restore to rebuild my OS and , except for all my email history, address book, profile and bookmarks, I seem to be up and running again. I want to back up to a WD MY Book 1tb external on a regular basis so I don't loose all my programs and profile.
I followed the easy instructions I found here on the Forum for a full system backup and watched the green bar progress to 10-15% complete and left the room. When I returned hours later the screen said "improper shut down" or something similar. When I rebooted there was a backup folder on my external but folder properties indicated it was completely empty.
The next day I tried to create a System Image Bup (Shadow Copy?) and the green bar progressed normally but, when I returned to the PC, the black dos screen said unable to find some file to boot. Again, folders were created but they were empty.
Does Windows 7 BU and restore normally restart the computer after creating a backup file? If so, can I prevent this so I can see where the program is breaking down?
I did create a System Repair disk on a DVD and it seems to have created that okay. The file is almost 300mb so I hope that means it will work if I ever need it.
I do know this new MY Book is a lot more complicated than my other Seagate external and seems to want to format and name files for me?
Upgraded W-XP64 to W7HP64 in August. Machine was set up with 3 hard drives in Nvidia RAID as a STRIPE. Installed a game that actually installed ok but gave BSOD. Went into safe mode and removed the game and system is working fine. I ran MSE and MBAM with nothing but tracking cookies found. Then I created a restore point but noticed that there were no others. So I rebooted and created another one. System still saying there are no restore points. So I ran CMD as admin and ran VSSADMIN LIST SHADOWS which came back "no items found that safisty the query". I can create restore points but they are not being saved by the system. I increased the size of the 30 to 65GB, rebooted and created another restore point, which also did not get saved. I've read about dual boot problems with XP, but that is not the case as I UPGRADED to Windows 7 OVER XP...over the 3 drives. Does RAID prevent the system from saving restore points? If that's the case why is it letting me create them in the first place?
Suddenly, whenever I copy anything in Word 07, the copied text is bracketed with square brackets. They are gray color, and they are not reflected in the clipboard contents, so I believe they are non-printing characters.I have never had this happen before, and can't figure out what is going on.This occurs when using the mouse or CTRL-c to copy. It shows in Print, outline, and Web views.
Upgraded W-XP64 to W7HP64 in August. Machine was set up with 3 hard drives in Nvidia RAID as a STRIPE. Installed a game that actually installed ok but gave BSOD. Went into safe mode and removed the game and system is working fine. I ran MSE and MBAM with nothing but tracking cookies found. Then I created a restore point but noticed that there were no others. So I rebooted and created another one. System still saying there are no restore points. So I ran CMD as admin and ran VSSADMIN LIST SHADOWS which came back "no items found that safisty the query". I can create restore points but they are not being saved by the system. I increased the size of the 30 to 65GB, rebooted and created another restore point, which also did not get saved. I've read about dual boot problems with XP, but that is not the case as I UPGRADED to Windows 7 OVER XP...over the 3 drives.Does RAID prevent the system from saving restore points? If that's the case why is it letting me create them in the first place?