So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
I'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.
My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.
One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.
Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?
finally getting around to my first win 7 install on my new 120 gb mushkin chronos deluxe.I am using tweakhounds win 7 install guide found here: TweakHound - Installing Windows 7 particullary, I am trying to avoid the 100 mb loss:
Quote: Code: *Avoiding the 200MB partition: Folks have discovered that on an unpartitioned drive Windows 7 will create a 200MB system partition. This is easily avoided by creating a partition before attempting to install Windows 7 (see above). (for some this partition will be 100MB)**Exception for SSD drives to avoid the 200MB partition and partition / format the drive.Partitioning is a little different for SSD (Solid State Drives). This is because of something called NTFS partition alignment. Basically this refers to where on the drive the partition starts. Vista and 7 will create a single partition optimally for SSD's. XP and most program boot disks will not. If possible you should partition the disk under an already installed Windows 7 or Windows Vista machine and then proceed with the usual installation steps. If not then this is the way to do it:
Windows 7 Installation Advanced Drive Formatting
1 - Boot up from the Windows 7 installation disc.
2 - Choose Repair your computer.
3 - In the System Recovery Options screen, choose Use recovery tools... and click Next.
4 - Open the Command Prompt.
5 - Type diskpart and hit Enter.
6 - Type list disk . Find the disk you wish to install Windows 7 on. If you only have one disk then it will show as disk 0. If you have multiple disks find the drive you wish to install 7 on.
7 - Type select disk 0 (or use the number of the disk you wish to install Windows 7 on)(note - that is a zero)
8 - Type list partition. There shouldn't be any.
9 - Type create partition primary.
10- Type select partition 1.
11- Type active.
12- Type format quick.
13- When finished reboot and begin your installation.
( DiskPart Command-Line Options ) After reboot, the ssd shows as having 100 mb used and is listed as a system drive.
I have a processor that is capable of handling a 64 bit operating system. Right now I am currently running a 32 bit operating system. Is there any way I could install 64 bit Windows 7 Ultimate without erasing my entire operating system?
View 4 Replies View RelatedMy PC broke a while back and I had it covered by warranty so I thought they were going to scrap it and give me a new PC (Like they did last time) but they didn't.. So before that I went to User > (Username) > and deleted every library inclkuding downloads, documents etc. Anyway, when they fixed this PC and gave it back, Java was uninstalled because I had deleted the files for it, so I went to go install it and I've now installed it 6 times and it won't register as being installed even after resetting PC. I went to control panel and deleted 6 different versions of Java including JDK, Jre whatever version, but still no results.
View 4 Replies View RelatedI have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
My wife's Dell M1330 was updated from Vista to Windows 7 several years, ago and now the hard disk is corrupted. Can I use the upgrade CD to reload Windows 7?
View 2 Replies View RelatedThis happens very frequently. It happens on and off. I am running Windows 7 professional on Dell Inspiron E1505 and when my computer goes into hibernation ( it doesn't matter if it's on battery or plugged in), sometimes I can reload the computer physically. Sometimes or most times, it shows a black screen and I have to manually shut the PC up and then reload it losing everything which I had before going into hibernation.
View 2 Replies View RelatedI'm running Win7 64-bit on a home-built machine. I'm trying to reformat C drive.OK. So, my bios is set to boot only from CD. My keyboard is enabled in the bios. Yet when I use F12 to enter boot menu, hdd is shown as selected. When I scoll down, select CD and hit enter, my machine still boots from hdd. I have used imgburn to burn a new copy of the Win7 DVD in case mine was faulty..
View 7 Replies View RelatedAfter reloading Windows 7 on an Acer Aspire, message " Windows could not start the installation process " appears. how to complete the Windows reload process?
View 2 Replies View RelatedI need to wipe my hard drive and reload Windows 7, Toshiba Satellite C655-S5049 I Dont have the Recovery dvd I made when it was first got
View 1 Replies View RelatedMy laptop suddenly decided to not run, it gets to "starting windows" but will not go any further. I`ve tried to boot from the OS disc to do a repair but it still goes to "starting windows". If i select "repair computer" at start up without the OS disc it stays at that window and will not go any further, I can`t even get an option when booting from OS disc to format and reload windows. The HDD is spinning so i know it`s getting power. I can run Linux live cd so i`m presuming it`s probably the HDD is fried even though it`s spinning. I even took ouit nthe HDD and connected it to my desktop but the desktop wouldn`t recognise it.
View 8 Replies View RelatedHave an issue with unmountable boot in windows 7. Do not have a repair disk or original disks since son purchase it from a friendI used an XP disk to get in cmd and did a chkdsk /r fixing bad sectors. Can i use the fixboot or bootrec.exe commands to fix the windows 7 boot issue?
View 2 Replies View RelatedHow do I eliminate the 100mb partition when doing a clean install? I will be doing this soon and would like to eliminate this.
View 4 Replies View RelatedI want to remove the 100mb partition W7 created when i installed it the first time (my hd is 3tb and i need to get rid of it because it uses a primary partition slot i need it for something else).Say I use a tool like paragon disk manager or acronis disk director... delete and remove that 100 mb partition... and then use the W7 recovery bootable cd..
View 4 Replies View RelatedI was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.
View 3 Replies View Relatedpreviously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
View 3 Replies View RelatedI bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
Will I have to reload Windows 7 Home Premium RTM, if I purchase a Windows 7 Home Premium Upgrade under the Student price of $29.99?
I signed up for it, but did not purchase it yet, been waiting till October 22nd got close.
how i reload my laptop
View 3 Replies View RelatedI am using a proper Windows 7 Ultimate disc to reload windows via the upgrade option. This is something I have done in the past without problems. I have tried for the last 2 days and after 5 hours and at the point of booting up into windows gives me the message that the upgrade has been unsuccessful and is reloading the previous version. Can anyone tell me why. The original version on my laptop is a legit copy as is the disc I have which is also the disc the copy on my laptop was originally installed from.
View 9 Replies View RelatedIs there any way to backup the history and/or database of currently recorded programs so that if the system is re-loaded, one can re-load the history and current database? I have the actual recordings on a separate disk so reloading the system will not delete the video files.
View 1 Replies View RelatedNeed to reload software for my dvd and tv tuner card
View 2 Replies View RelatedI have a 500 gb weston digital portable hdd. I use a casing to use it in my pc. I recently checked that there are many bad sectors in my hdd. Is it possible to remove that bad sectors by self. Or as it's in warranty, send it to the company and they'll take care of.
View 2 Replies View RelatedI have installed Windows 7 from my hard drive (E:). Now I have a small problem, the boot sector (or something like that) is located in E:, I want to move it to C:. Moreover there is two options in the bootscreen: Windows 7 and install Windows 7 RC. How I will remove the secon option?
View 4 Replies View RelatedI had to reinstall Windows 7.
I guess the first install made the 100MB partition because it saw WinXP on my old partition. On second Windows 7 install this partition became free, boot files now at c:
The dumb thing is the 100MB partition was renamed D:
I was able to rename it F: just to get it out of the way of my normal naming convention, D for flight sim, E for games and other stuff.
How can I merge this 100MB partition with one of my other (D or E)?
Another thing, C,D and E are "primary" partitions. I am used to see a few "extended". Is this ok? Only the 100MB partition became "extended".
so i am not intirerly sure this is the correct place to post it.Secondly, i think this is a problem that i have created myself and now i am unable to correct it.The jist of it is this. Whenever i try to active the webcam (Function + F10) a pop-up shows saying that hardware connected to a USB port is not recognized. This must be cause by the cam (which us buillt-in) is connected to the USB port on the motherboard.When i go to device manager, i can see that there is a unknown device connected, whenever the webcam is powered on.Btw it worked fine when i did the initial installation of the computer.What i have tried to do to resolve this is the following:
- Remove all drivers asociated with the webcam - reboot - reinstall from provided CD
- Power down, take out batteri (even for en entire night) to let the motherboard reload the USB drivers.
- Removed all the USB drivers and have tried reinstallling
I deleted som folders from my D: drive, (which is not the partition that has my windows directory installed) and there i might have deleted som crutial files for the webcam software to work.I have no idea on how to go on from here. This is a computer i have spend quite a long time getting up-2-date with all the programs i use for school and the exams are coming up. I would really like not having to do a clean install right now.
HDD: ST30005 28AS. Failing. I have to recover some data and throw it away. With Seatools dos cd, I accidentally the first sector. I also set it at that time at 33 gb. Now I can't see any partitions in it. I tried everything in HIREN's boot cd. The drive was failing, 15 minutes at windows loading, SMART messages to backup it, etc. I low level formatted it when it was 33 GB. My data is a few GB beyond anyway. However I played with it I can't read anything from it. Help.OK, so the drive is my third, a storage drive. I disconnected the other drives, inserted the Windows 7 recovery disk, but it didn't do anything. I couldn't find the ol' cmd menu I knew from other times. (Info or help -> a series of commands, including fixmbr.) It found the drive, but couldn't say anything about it. So no access, no identity, no status of it, nothing. Windows keeps telling me to replace the drive, but sees no volume informations. How the hell can a drive become invisible at any kind of content mode? I just used the menu from seatools and it vanished. How can it offer a delete for first sector but no fresh write of it?
View 1 Replies View Relatedhow it get bad sector on my hard drive?
View 2 Replies View RelatedRunning home premium on HP desktop.I installed an SSD and installed W7 on it. Unfortunately I didn't have the foresight to remove the old HDD first, and the W7 install kept the boot sector on the old HDD. Now of course when I remove the old HDD the system won't boot. I tried doing a repair with the W7 install disc. It does say it's repairing, but after many restarts there is still no boot sector on the SSD.So now I re-installed the old drive, but I eventually want to remove it. One additional thing that might help the diagnosis: On bootup I am presented with two W7 boot options. If I select the second W7 it comes back with "Windows failed to start" and then goes on to instruct me to reboot with the W7 disk and select "repair". But as I stated, I already tried that and it didn't work.I spent many hours setting up my W7 environment on the new drive, and I'd really like to fix this problem without doing a fresh re-install of W7.
View 3 Replies View RelatedIn my reading, I got the impression there is supposed to be a 100 MB system partition installed as part of the Win 7 installation. I don't see this partition on my system even looking at it with Acronis Disk Director.
If I am right that there is supposed to be this system partition, it sounds like it could be a problem down the road that I don't have it. Is there any way to get this partition installed on my system w/o doing a new clean install and, if so, what would be the procedure?
