I have a 500 gb weston digital portable hdd. I use a casing to use it in my pc. I recently checked that there are many bad sectors in my hdd. Is it possible to remove that bad sectors by self. Or as it's in warranty, send it to the company and they'll take care of.
View 2 RepliesI'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.
My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.
One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.
Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?
I have installed Windows 7 from my hard drive (E:). Now I have a small problem, the boot sector (or something like that) is located in E:, I want to move it to C:. Moreover there is two options in the bootscreen: Windows 7 and install Windows 7 RC. How I will remove the secon option?
View 4 Replies View RelatedHDD: ST30005 28AS. Failing. I have to recover some data and throw it away. With Seatools dos cd, I accidentally the first sector. I also set it at that time at 33 gb. Now I can't see any partitions in it. I tried everything in HIREN's boot cd. The drive was failing, 15 minutes at windows loading, SMART messages to backup it, etc. I low level formatted it when it was 33 GB. My data is a few GB beyond anyway. However I played with it I can't read anything from it. Help.OK, so the drive is my third, a storage drive. I disconnected the other drives, inserted the Windows 7 recovery disk, but it didn't do anything. I couldn't find the ol' cmd menu I knew from other times. (Info or help -> a series of commands, including fixmbr.) It found the drive, but couldn't say anything about it. So no access, no identity, no status of it, nothing. Windows keeps telling me to replace the drive, but sees no volume informations. How the hell can a drive become invisible at any kind of content mode? I just used the menu from seatools and it vanished. How can it offer a delete for first sector but no fresh write of it?
View 1 Replies View Relatedhow it get bad sector on my hard drive?
View 2 Replies View RelatedRunning home premium on HP desktop.I installed an SSD and installed W7 on it. Unfortunately I didn't have the foresight to remove the old HDD first, and the W7 install kept the boot sector on the old HDD. Now of course when I remove the old HDD the system won't boot. I tried doing a repair with the W7 install disc. It does say it's repairing, but after many restarts there is still no boot sector on the SSD.So now I re-installed the old drive, but I eventually want to remove it. One additional thing that might help the diagnosis: On bootup I am presented with two W7 boot options. If I select the second W7 it comes back with "Windows failed to start" and then goes on to instruct me to reboot with the W7 disk and select "repair". But as I stated, I already tried that and it didn't work.I spent many hours setting up my W7 environment on the new drive, and I'd really like to fix this problem without doing a fresh re-install of W7.
View 3 Replies View RelatedHave an issue with unmountable boot in windows 7. Do not have a repair disk or original disks since son purchase it from a friendI used an XP disk to get in cmd and did a chkdsk /r fixing bad sectors. Can i use the fixboot or bootrec.exe commands to fix the windows 7 boot issue?
View 2 Replies View RelatedI was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.
View 3 Replies View RelatedHave a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.
View 6 Replies View RelatedYesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:
"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."
I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.
I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.
My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
View 7 Replies View RelatedSo I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
I have a Dell Inspiron that is running Win7 Home premium 64 bit and I am getting an error message while booting up it states "No boot sector on internal hard drive. No bootable devices--strike F1 to retry boot". When I strike F1 it boots just fine.
View 9 Replies View RelatedI bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
I`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\
View 1 Replies View RelatedIt's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
I am attempting to uninstall (and then reinstall) Office 2010 Prof Plus. I am not able to remove it from Add/Remove programs, have read through some help info and attempted to use the Windows Fixit, Revo & Ripoutoffice2007, none of which have removed it (Revo didn't take it out and then pulled up a million 'left over' files, none of which I deleted).
View 2 Replies View Relatedcan i remove my flash memory without removing safely remove
View 2 Replies View RelatedDoes anyone know how to remove the "safely remove hardware" icon in the taskbar? I do not mean hide it. I have my icons always show in the notification area because I don't like the arrow icon either.
Any ideas?
I have a laptop HP PAVILION tx2550er. After installing AMD AHCI driver in the system tray shows the Safely Remove Hardware icon (my hard drive). How to remove (not hide!) the icon?
View 4 Replies View RelatedAlright. So I finally got my new computer and slapped Windows 7 Pro x64 on it. Since my case has a slot to plug in an external drive, I used AHCI-mode to support hot-swapping. (And yes, I actually will use it)
Unfortunately, this has caused the "Safely Remove Hardware" icon to appear continuously in the system tray - giving me the option to eject my system drive. Being the minimalist I am, this useless icon annoys me to no end. Is there any way to tell windows not to add the HDD to the safely remove hardware menu (and thus make the menu disappear when there's no other devices)? I've been looking around and can't find any solutions.
I am NOT looking to disable the safely remove hardware entirely - I still want it to show up for other devices, just not the system drive. Also, I don't want to just hide it with the expand/collapse menu - call me picky.
How can i remove JUST the program from the list, without actually uninstalling it?Ive tried going toHKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall but i cannot find the program i want to do this to.
View 3 Replies View Relatedi use internet explorer now cause someone told me its the best one, but i get a lot of annoying ads in general, whenever i browse Internet, facebook. how do i remove ads, what browser shall i use, what programs shall i download for the browser, what settings.
View 2 Replies View RelatedI am wanting to remove programs that have already been uninstalled from my add/remove programs list. I have tried uninstalling them in safe mode. I have tried to restore to an earlier time(which just compounded the problem). It used to give me the option of removing programs with a message like "error occured during uninstall would you like to remove program anyway?" but now I just get install.log not found over and over again. My program list is super huge and 80%(approx) is not even there. It is driving me insane.
View 8 Replies View RelatedI need to remove xp from my C: i installed XP in C: (primary partition) and Win7 in D:I need to remove the XP. I cant format that drive...what should i do to remove that?In Run->msconfig->Boot tab it shows 1ly win7...i cant delete xp....
View 2 Replies View RelatedSince I intalled Win 7 on my computer, I have nouse for the partion that came with the computeroriginally. I have already deleted all the files inthe partition, so there is nothing I have to worryabout.What I want to know is what is the correct wayto remove the partition safely so I can recoverthat space.
View 2 Replies View RelatedWhen Microsoft first allowed a peek at Windows 8, I created a 50gb partition on my C: drive so I could take a look at it. Now, after reading about some horror stories about Microsoft's removal of support for several functions I find quite useful in Windows 7 especially its downgrading of support for DVDs, I would like to remove the partition I allocated to Windows 8 and reclaim the space on my C: drive for Windows 7. Can this be done easily without reformatting? I think I'll hang around with Windows 7 until I know more about Microsoft's intentions.
View 7 Replies View RelatedMy computer is telling me that there are two users on my system, but I'm the only one using the computer. It also shows that the second user ID is the same as mine. How do I remove one of these to eliminate the conflict?
View 1 Replies View RelatedJust installed windows 7. On setup I gave the computer a name. e.g. My-PC "my-PC" was part of a homegroup which I thought I had to set up.I already had a network called homenet that I thought this might allow me to join. Instead, homegroup became a new network. I removed the home group and all was OK.Under "network" in windows explorer, all XP computers, NAS box, and attched printers showed up, along with the new win7 pc, "My-pc" so all seems to be OK.I did not like "My-PC" as the name of the win 7 computer so I renamed it. e.g. "My-New-PC".I rebooted and when the network list came up, both "My-PC" and "My-New-PC" BOTH showed up in the list, but "My-PC" in not accessible.Since it no longer exists withthat name, how can I remove the name from the network? So to summarizing this I have a renamed computer where the old name AND the new name for the same computer exisits on the network, but the old name is unaccessible and I want to remove it fromthe network(list).
View 1 Replies View RelatedIE has a system pop-up that tells the user that disabling toolbars will speed up IE. It appears at the bottom of the window. I want to know how to disable this from IE9.lsewhere in these forums are the instructions for using the Group Policy Editor to do this; but� gpedit.msc is not available in Windows 7 HomePremium edition. The post I saw says that HomePremium users have to edit the registry manually.I'm happy to do a registry edit but which entries do I have to edit and what values do I have to use, please?Other forums suggest setting the time delay to some seconds but this merely affects the time it takes for the pop-up to appear.
View 2 Replies View RelatedEveryone I would like know,how to remove ultravnc from the system. I treid to remove from control panel,still it remains in task bar.
View 5 Replies View Related